HCF4041UB QUAD TRUE/COMPLEMENT BUFFER ■ ■ ■ ■ ■ ■ ■ ■ BALANCED SINK AND SOURCE CURRENT: APPROXIMATELY 4 TIMES STANDARD "B" DRIVE EQUALIZED DELAY TO TRUE AND COMPLEMENT OUTPUTS QUIESCENT CURRENT SPECIFIED UP TO 20V STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS 5V, 10V AND 15V PARAMETRIC RATINGS INPUT LEAKAGE CURRENT II = 100nA (MAX) AT VDD = 18V TA = 25°C 100% TESTED FOR QUIESCENT CURRENT MEETS ALL REQUIREMENTS OF JEDEC JESD13B " STANDARD SPECIFICATIONS FOR DESCRIPTION OF B SERIES CMOS DEVICES" DESCRIPTION The HCF4041UB is a monolithic integrated circuit fabricated in Metal Oxide Semiconductor technology available in DIP and SOP packages. The HCF4041UB is a QUAD TRUE/ COMPLEMENT buffer consisting of n and p channel units having low channel resistance and DIP SOP ORDER CODES PACKAGE TUBE T&R DIP SOP HCF4041UBEY HCF4041UBM1 HCF4041UM013TR high current (sourcing and sinking) capability. This device is intended for use as a buffer, line driver, or CMOS to TTL driver. It can be used as an ultra-low power resistor network driver for A/D and D/A conversion, as a transmission line driver, and in other applications where high noise immunity and low power dissipation are primary design requirements. PIN CONNECTION September 2001 1/8 HCF4041UB INPUT EQUIVALENT CIRCUIT PIN DESCRIPTION PIN No SYMBOL NAME AND FUNCTION 3, 6, 10, 13 1, 4, 8, 11 A, B, C, D E, G, K, M 2, 5, 9, 12 F, H, L, N Data Inputs Data Outputs (TRUE) Data Outputs (COMPLEMENT) 7 VSS Negative Supply Voltage 14 VDD Positive Supply Voltage TRUTH TABLE INPUTS OUTPUTS (TRUE) OUTPUTS (COMPLEMENT) A, B, C, D E, G, K, M F, H, L, N H L H L L H FUNCTIONAL DIAGRAM ABSOLUTE MAXIMUM RATINGS Symbol VDD Parameter Supply Voltage VI DC Input Voltage II DC Input Current PD Value Unit -0.5 to +22 V -0.5 to VDD + 0.5 ± 10 V mA 200 100 mW mW Top Power Dissipation per Package Power Dissipation per Output Transistor Operating Temperature -55 to +125 °C Tstg Storage Temperature -65 to +150 °C Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied. All voltage values are referred to VSS pin voltage. 2/8 HCF4041UB RECOMMENDED OPERATING CONDITIONS Symbol VDD Parameter Value Supply Voltage VI Input Voltage Top Operating Temperature Unit 3 to 20 V 0 to VDD V -55 to 125 °C DC SPECIFICATIONS Test Condition Symbol IL VOH VOL VIH VIL IOH IOL II CI Parameter Quiescent Current High Level Output Voltage Low Level Output Voltage VI (V) 0/5 0/10 0/15 0/20 0/5 0/10 0/15 5/0 10/0 15/0 High Level Input Voltage Low Level Input Voltage Output Drive Current Output Sink Current Input Leakage Current Input Capacitance VO (V) 0/5 0/5 0/10 0/15 0/5 0/10 0/15 0/18 0.5/4.5 1/9 1.5/13.5 4.5/0.5 9/1 13.5/1.5 2.5 4.6 9.5 13.5 0.4 0.5 1.5 Value |IO| VDD (µA) (V) <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 Any Input Any Input 5 10 15 20 5 10 15 5 10 15 5 10 15 5 10 15 5 5 10 15 5 10 15 18 TA = 25°C Min. Typ. Max. 0.02 0.02 0.02 0.04 1 2 4 20 4.95 9.95 14.95 -40 to 85°C -55 to 125°C Min. Min. Max. 30 60 120 600 4.95 9.95 14.95 0.05 0.05 0.05 4 8 12.5 4.95 9.95 14.95 4 8 12.5 1 2 2.5 -5.44 -12.8 -1.36 -3.2 -4.25 -10 -16.1 -38 1.36 3.2 4.25 10 16.1 38 ±0.1 15 22.5 0.05 0.05 0.05 1 2 2.5 V V 1 2 2.5 -4.08 -1.02 -3.18 -12.1 1.02 3.18 12.11 ±1 µA V 4 8 12.5 -4.08 -1.02 -3.18 -12.1 1.02 3.18 12.11 ±10-5 Max. 30 60 120 600 0.05 0.05 0.05 Unit V mA mA ±1 µA pF The Noise Margin for both "1" and "0" level is: 1V min. with VDD =5V, 2V min. with VDD=10V, 2.5V min. with VDD=15V 3/8 HCF4041UB DYNAMIC ELECTRICAL CHARACTERISTICS (Tamb = 25°C, CL = 50pF, RL = 200KΩ, tr = tf = 20 ns) Test Condition Symbol Parameter tPLH tPHL Propagation Delay Time tTLH tTHL Output Transition Time VDD (V) 5 10 15 5 10 15 (*) Typical temperature coefficient for all VDD value is 0.3 %/°C. TEST CIRCUIT CL = 50pF or equivalent (includes jig and probe capacitance) RL = 200KΩ RT = ZOUT of pulse generator (typically 50Ω) 4/8 Value (*) Min. Unit Typ. Max. 60 35 25 40 20 15 120 70 50 80 40 30 ns ns HCF4041UB WAVEFORM 1 : PROPAGATION DELAY TIMES FOR NON INVERTING CONDITIONS (f=1MHz; 50% duty cycle) WAVEFORM 2 : PROPAGATION DELAY TIMES FOR INVERTING CONDITIONS (f=1MHz; 50% duty cycle) 5/8 HCF4041UB Plastic DIP-14 MECHANICAL DATA mm. inch DIM. MIN. a1 0.51 B 1.39 TYP MAX. MIN. TYP. MAX. 0.020 1.65 0.055 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 15.24 0.600 F 7.1 0.280 I 5.1 0.201 L Z 3.3 1.27 0.130 2.54 0.050 0.100 P001A 6/8 HCF4041UB SO-14 MECHANICAL DATA DIM. mm. MIN. TYP A a1 inch MAX. MIN. TYP. 1.75 0.1 0.068 0.2 a2 MAX. 0.003 0.007 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45° (typ.) D 8.55 8.75 0.336 0.344 E 5.8 6.2 0.228 0.244 e 1.27 0.050 e3 7.62 0.300 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M S 0.68 0.026 8° (max.) PO13G 7/8 HCF4041UB Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. © The ST logo is a registered trademark of STMicroelectronics © 2001 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom © http://www.st.com 8/8