M54HCT10 M74HCT10 TRIPLE 3-INPUT NAND GATE . . . . . . . HIGH SPEED tPD = 11 ns (TYP.) AT VCC = 5 V LOW POWER DISSIPATION ICC = 1 µA (MAX.) AT TA = 25 °C COMPATIBLE WITH TTL OUTPUTS VIH = 2V (MIN.) VIL = 0.8V (MAX) OUTPUT DRIVE CAPABILITY 10 LSTTL LOADS SYMMETRICAL OUTPUT IMPEDANCE IOH = IOL = 4 mA (MIN.) BALANCED PROPAGATION DELAYS tPLH = tPHL PIN AND FUNCTION COMPATIBLE WITH 54/74LS10 DESCRIPTION The M54/74HCT10 is a high speed CMOS TRIPLE 3-INPUT NAND GATE fabricated with silicon gate C2MOS technology. It has the same high speed performance of LSTTL combined with true CMOS low power consumption. The internal circuit is composed of 3 stages including buffer output, which enables high noise immunity and stable output. All inputs are equipped with protection circuits against static discharge and transient excess voltage. B1R (Plastic Package) F1R (Ceramic Package) M1R (Micro Package) C1R (Chip Carrier) ORDER CODES : M54HCT10F1R M74HCT10M1R M74HCT10B1R M74HCT10C1R PIN CONNECTIONS (top view) This integrated circuit has input and output characteristics that are fully compatible with 54/74 LSTTL logic families. M54/74HCT devices are designed to directly interface HSC2MOS systems with TTL and NMOS components. They are also plug in replacements for LSTTL devices giving a reduction of power consumption. INPUT AND OUTPUT EQUIVALENT CIRCUIT NC = No Internal Connection February 1993 1/9 M54/M74HCT10 TRUTH TABLE IEC LOGIC SYMBOL A B C Y L X X L X X H H X X L H H H H L PIN DESCRIPTION PIN No 1, 3, 9 SYMBOL 1A to 3A NAME AND FUNCTION Data Inputs 2, 4, 10 1B to 3B Data Inputs 13, 5, 11 12, 6, 8 1C to 3C 1Y to 3Y Data Inputs Data Outputs 7 GND Ground (0V) 14 VCC Positive Supply Voltage SCHEMATIC CIRCUIT (Per Gate) ABSOLUTE MAXIMUM RATINGS Symbol ICC Value Unit VCC VI Supply Voltage DC Input Voltage Parameter -0.5 to +7 -0.5 to VCC + 0.5 V V VO DC Output Voltage -0.5 to VCC + 0.5 V IIK DC Input Diode Current ± 20 mA IOK DC Output Diode Current ± 20 mA IO or IGND DC Output Source Sink Current Per Output Pin DC VCC or Ground Current ± 25 ± 50 mA mA PD Power Dissipation 500 (*) mW Tstg TL Storage Temperature Lead Temperature (10 sec) -65 to +150 300 o o C C Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these condition isnotimplied. (*) 500 mW: ≅ 65 oC derate to 300 mW by 10mW/oC: 65 oC to 85 oC 2/9 M54/M74HCT10 RECOMMENDED OPERATING CONDITIONS Symbol Parameter Value Unit V V VCC VI Supply Voltage Input Voltage 4.5 to 5.5 0 to VCC VO Output Voltage 0 to VCC Top tr, tf Operating Temperature: M54HC Series M74HC Series Input Rise and Fall Time (VCC = 4.5 to 5.5V) V o -55 to +125 -40 to +85 0 to 500 C C ns o DC SPECIFICATIONS Test Conditions Symbol Parameter VIH High Level Input Voltage V IL Low Level Input Voltage V OH High Level Output Voltage VOL II ICC ∆ICC Low Level Output Voltage Input Leakage Current Quiescent Supply Current Additional worst case supply current Value TA = 25 oC 54HC and 74HC VCC (V) Min. 2.0 4.5 to 5.5 4.5 to 5.5 Typ. Max. -40 to 85 oC -55 to 125 oC 74HC 54HC Min. 2.0 0.8 4.5 VI = IO=-20 µA VIH or IO=-4.0 mA V IL 4.5 VI = IO= 20 µA VIH or IO= 4.0 mA V IL Max. Min. 2.0 0.8 Max. V 0.8 4.4 4.5 4.4 4.4 4.18 4.31 4.13 4.10 Unit V V 0.0 0.1 0.1 0.1 0.17 0.26 0.33 0.4 VI = VCC or GND ±0.1 ±1 ±1 µA 5.5 VI = VCC or GND 1 10 20 µA 5.5 Per Input pin VI = 0.5V or V I = 2.4V Other Inputs at V CC or GND IO= 0 2.0 2.9 3.0 mA 5.5 V 3/9 M54/M74HCT10 AC ELECTRICAL CHARACTERISTICS (C L = 50 pF, Input t r = tf = 6 ns) Test Conditions Value o -40 to 85 oC -55 to 125 oC 74HC 54HC Min. Max. Min. Max. Symbol Parameter VCC (V) TA = 25 C 54HC and 74HC Min. Typ. Max. tTLH tTHL Output Transition Time 4.5 8 15 19 22 tPLH tPHL Propagation Delay Time 4.5 14 22 28 33 5 46 10 10 10 CIN CPD (*) Input Capacitance Power Dissipation Capacitance Unit pF pF (*) CPD is defined as the value of the IC’s internal equivalent capacitance which is calculated from the operating current consumption without load. (Refer to Test Circuit). Average operting current can be obtained by the following equation. ICC(opr) = CPD •VCC •fIN + ICC/3 (per Gate) SWITCHING CHARACTERISTICS TEST CIRCUIT TEST CIRCUIT ICC (Opr.) INPUT WAVEFORM IS THE SAME AS THAT IN CASE OF SWITCHING CHARACTERISTICS TEST. 4/9 M54/M74HCT10 Plastic DIP14 MECHANICAL DATA mm DIM. MIN. a1 0.51 B 1.39 TYP. inch MAX. MIN. TYP. MAX. 0.020 1.65 0.055 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 15.24 0.600 F 7.1 0.280 I 5.1 0.201 L Z 3.3 1.27 0.130 2.54 0.050 0.100 P001A 5/9 M54/M74HCT10 Ceramic DIP14/1 MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 20 0.787 B 7.0 0.276 D E 3.3 0.130 0.38 e3 0.015 15.24 0.600 F 2.29 2.79 0.090 0.110 G 0.4 0.55 0.016 0.022 H 1.17 1.52 0.046 0.060 L 0.22 0.31 0.009 0.012 M 1.52 2.54 0.060 0.100 N P Q 10.3 7.8 8.05 5.08 0.406 0.307 0.317 0.200 P053C 6/9 M54/M74HCT10 SO14 MECHANICAL DATA mm DIM. MIN. TYP. A a1 inch MAX. MIN. TYP. 1.75 0.1 0.068 0.2 a2 MAX. 0.003 0.007 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45° (typ.) D 8.55 E 5.8 8.75 0.336 6.2 0.228 0.344 0.244 e 1.27 0.050 e3 7.62 0.300 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M S 0.68 0.026 8° (max.) P013G 7/9 M54/M74HCT10 PLCC20 MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 9.78 10.03 0.385 0.395 B 8.89 9.04 0.350 0.356 D 4.2 4.57 0.165 0.180 d1 2.54 0.100 d2 0.56 0.022 E 7.37 8.38 0.290 0.330 e 1.27 0.050 e3 5.08 0.200 F 0.38 0.015 G 0.101 0.004 M 1.27 0.050 M1 1.14 0.045 P027A 8/9 M54/M74HCT10 Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use ascritical components in life support devices or systems without express written approval of SGS-THOMSON Microelectonics. 1994 SGS-THOMSON Microelectronics - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A 9/9