VJ C0G (NP0) Dielectric Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications FEATURES • C0G is an ultra-stable dielectric offering a Temperature Coefficient of Capacitance (TCC) of 0 ± 30 ppm/°C • Low Dissipation Factor (DF) RoHS COMPLIANT • Ideal for critical timing and tuning applications • Ideal for snubber and surge suppression applications • Protective surface coating of high voltage capacitors maybe required to prevent surface arcing. • Surface mount, precious metal technology, wet build process ELECTRICAL SPECIFICATIONS Insulation Resistance (IR): At + 25 °C and rated voltage 100 000 MΩ minimum or 1000 ΩF, whichever is less At + 125 °C and rated voltage 10 000 MΩ minimum or 100 ΩF, whichever is less Note: Electrical characteristics at + 25 °C unless otherwise specified Operating Temperature: - 55 °C to + 125 °C Capacitance Range: 1.0 pF to 0.056 µF Voltage Rating: 10 Vdc to 1000 Vdc Dielectric Withstanding Voltage (DWV): This is the maximum voltage the capacitors are tested for a 1 to 5 second period and the charge/discharge current does not exceed 50 mA ≤ 200 Vdc : DWV at 250 % of rated voltage 500 Vdc: DWV at 200 % of rated voltage 630/1000 Vdc: DWV at 150 % of rated voltage Temperature Coefficient of Capacitance (TCC): 0 ± 30 ppm/°C from - 55 °C to + 125 °C Dissipation Factor (DF): 0.1 % maximum at 1.0 Vrms and 1 kHz for values > 1000 pF 0.1 % maximum at 1.0 Vrms and 1 MHz for values ≤ 1000 pF Aging Rate: 0 % maximum per decade ORDERING INFORMATION VJ0805 CASE CODE 0402 A DIELECTRIC A = C0G (NP0) 0603 0805 1206 1210 1808 1812 1825 2220 2225 102 CAPACITANCE NOMINAL CODE K CAPACITANCE TOLERANCE B = ± 0.10 pF Expressed in C = ± 0.25 pF picofarads (pF). D = ± 0.5 pF The first two F=±1% digits are G=±2% significant, the J=±5% third is a K = ± 10 % multiplier. An “R” Note: indicates a B, C, D < 10 pF decimal point. F, G, J, K ≥ 10 pF Examples: 102 = 1000 pF 1R8 = 1.8 pF X TERMINATION X = Ni barrier 100 % tin plated F = AgPd A DC VOLTAGE RATING (1) X = 25 V A = 50 V B = 100 V C = 200 V ### (2) PROCESS PACKAGING CODE A T MARKING A = Unmarked M = Marked Note: Marking is only available for 0805 and 1206 E = 500 V L = 630 V G = 1000 V T = 7" reel/plastic tape C = 7" reel/paper tape R = 11 1/4" reel/plastic tape P = 11 1/4" reel/paper tape O = 7" reel/flamed paper tape I = 11 1/4"/13" reel/flamed paper tape Note: “I” and “O” is used for “F” termination paper taped Notes: (1) DC voltage rating should not be exceeded in application (2) Process Code may be added with up to three digits, used to control non-standard products and/or special requirements (3) Case size designator may be replaced by a four digit drawing number used to control non-standard products and/or requirements www.vishay.com 38 For technical questions, contact: [email protected] Document Number: 45053 Revision: 28-Aug-08 VJ C0G (NP0) Dielectric Surface Mount Multilayer Ceramic Chip Capacitors Vishay Vitramon for Commercial Applications DIMENSIONS in inches [millimeters] W L T MAX. P PART ORDERING NUMBER LENGTH (L) 0402 VJ0402 0.040 + 0.004/- 0.002 [1.00 + 0.10/- 0.05] 0.020 + 0.004/- 0.002 [0.50 + 0.10/- 0.05] 0603 VJ0603 0.063 ± 0.005 [1.60 ± 0.12] 0805 VJ0805 1206 EIA STYLE WIDTH (W) MAXIMUM THICKNESS (T) TERMINATION (P) MINIMUM MAXIMUM 0.024 [0.60] 0.004 [0.10] 0.016 [0.41] 0.031 ± 0.005 [0.80 ± 0.12] 0.036 [0.92] 0.012 [0.30] 0.018 [0.46] 0.079 ± 0.008 [2.00 ± 0.20] 0.049 ± 0.008 [1.25 ± 0.20] 0.057 [1.45] 0.010 [0.25] 0.028 [0.71] VJ1206 0.126 ± 0.008 [3.20 ± 0.20] 0.063 ± 0.008 [1.60 ± 0.20] 0.067 [1.70] 0.010 [0.25] 0.028 [0.71] 1210 VJ1210 0.126 ± 0.008 [3.20 ± 0.20] 0.098 ± 0.008 [2.50 ± 0.20] 0.067 [1.70] 0.010 [0.25] 0.028 [0.71] - VJ1808 0.177 ± 0.010 [4.50 ± 0.25] 0.080 ± 0.010 [2.03 ± 0.25] 0.067 [1.70] 0.010 [0.25] 0.030 [0.76] 1812 VJ1812 0.177 ± 0.010 [4.50 ± 0.25] 0.126 ± 0.008 [3.20 ± 0.20] 0.086 [2.18] 0.010 [0.25] 0.030 [0.76] 1825 VJ1825 0.177 ± 0.010 [4.50 ± 0.25] 0.252 ± 0.010 [6.40 ± 0.25] 0.086 [2.18] 0.010 [0.25] 0.030 [0.76] - VJ2220 0.220 ± 0.008 [5.59 ± 0.20] 0.200 ± 0.010 [5.08 ± 0.25] 0.086 [2.18] 0.010 [0.25] 0.030 [0.76] - VJ2225 0.220 ± 0.010 [5.59 ± 0.25] 0.250 ± 0.010 [6.35 ± 0.25] 0.086 [2.18] 0.010 [0.25] 0.030 [0.76] Document Number: 45053 Revision: 28-Aug-08 For technical questions, contact: [email protected] www.vishay.com 39 VJ C0G (NP0) Dielectric Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications SELECTION CHART STYLE EIA TYPE VOLTAGE (Vdc) CAP. CODE 1R0 1R2 1R5 1R8 2R2 2R7 3R3 3R9 4R7 5R6 6R8 8R2 100 120 150 180 220 270 330 390 470 560 680 820 101 121 151 181 221 271 331 391 471 561 681 821 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 223 273 333 393 473 563 VJ0402 0402 25 50 100 VJ0603 0603 50 100 200 •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• 50 VJ0805 0805 100 200 VJ1206 1206 500 50 100 200 500 630 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 50 VJ1210 (1) 1210 100 200 500 630 CAP. 1.0 pF 1.2 pF 1.5 pF 1.8 pF 2.2 pF 2.7 pF 3.3 pF 3.9 pF 4.7 pF 5.6 pF 6.8 pF 8.2 pF 10 pF 12 pF 15 pF 18 pF 22 pF 27 pF 33 pF 39 pF 47 pF 56 pF 68 pF 82 pF 100 pF 120 pF 150 pF 180 pF 220 pF 270 pF 330 pF 390 pF 470 pF 560 pF 680 pF 820 pF 1000 pF 1200 pF 1500 pF 1800 pF 2200 pF 2700 pF 3300 pF 3900 pF 4700 pF 5600 pF 6800 pF 8200 pF 0.010 µF 0.012 µF 0.015 µF 0.018 µF 0.022 µF 0.027 µF 0.033 µF 0.039 µF 0.047 µF 0.056 µF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • • • • • • •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Note: (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 •• Paper tape • Plastic tape www.vishay.com 40 For technical questions, contact: [email protected] Document Number: 45053 Revision: 28-Aug-08 VJ C0G (NP0) Dielectric Surface Mount Multilayer Ceramic Chip Capacitors Vishay Vitramon for Commercial Applications SELECTION CHART VJ1808 (1) - STYLE EIA TYPE VOLTAGE (Vdc) CAP. CAP. CODE 1R0 1.0 pF 1R2 1.2 pF 1R5 1.5 pF 1R8 1.8 pF 2R2 2.2 pF 2R7 2.7 pF 3R3 3.3 pF 3R9 3.9 pF 4R7 4.7 pF 5R6 5.6 pF 6R8 6.8 pF 8R2 8.2 pF 100 10 pF 120 12 pF 150 15 pF 180 18 pF 220 22 pF 270 27 pF 330 33 pF 390 39 pF 470 47 pF 560 56 pF 680 68 pF 820 82 pF 101 100 pF 121 120 pF 151 150 pF 181 180 pF 221 220 pF 271 270 pF 331 330 pF 391 390 pF 471 470 pF 561 560 pF 681 680 pF 821 820 pF 102 1000 pF 122 1200 pF 152 1500 pF 182 1800 pF 222 2200 pF 272 2700 pF 332 3300 pF 392 3900 pF 472 4700 pF 562 5600 pF 682 6800 pF 822 8200 pF 103 0.010 µF 123 0.012 µF 153 0.015 µF 183 0.018 µF 223 0.022 µF 273 0.027 µF 333 0.033 µF 393 0.039 µF 473 0.047 µF 563 0.056 µF VJ1812 (1) 1812 VJ1825 (1) 1825 VJ2220 (1) - VJ2225 (1) - 50 100 200 500 1000 50 100 200 500 1000 50 100 200 500 50 100 200 500 1000 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 50 • • • • • • • • • • • • • • • • • • • • • 100 200 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 500 • • • • • • • • • • • • • • • • • • • • • • • • • • Note: (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 • Plastic tape Document Number: 45053 Revision: 28-Aug-08 For technical questions, contact: [email protected] www.vishay.com 41 VJ C0G (NP0) Dielectric Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications C0G (NP0) DIELECTRIC - TYPICAL PARAMETERS TYPICAL PARAMETER C0G (NP0) TEMPERATURE COEFFICIENT OF CAPACITANCE TYPICAL PARAMETER C0G (NP0) VOLTAGE COEFFICIENT OF CAPACITANCE 0.2 1.5 % CAPACITANCE CHANGE % CAPACITANCE CHANGE 2.0 1.0 0.5 0.0 - 0.5 NP0 - 1.0 - 1.5 - 2.0 0.1 0.0 - 0.1 - 0.2 - 75 - 50 - 25 25 0 50 75 0 100 125 150 175 10 20 TEMPERATURE °C 40 50 60 70 80 90 100 DC VOLTS APPLIED TYPICAL PARAMETER C0G (NP0) MINIMUM INSULATION RESISTANCE VS. TEMPERATURE TYPICAL PARAMETER C0G (NP0) AGING RATE 0.2 10 000 INSULATION RESISTANCE (ΩF) % CAPACITANCE CHANGE 30 0.1 1000 0.0 100 - 0.1 - 0.2 10 1 10 100 1000 10 000 10 25 HOURS TYPICAL PARAMETER C0G (NP0) CHANGE OF CAPACITANCE WITH FREQUENCY 150 TYPICAL PARAMETER C0G (NP0) CHANGE OF CAPACITANCE WITH FREQUENCY +2 0.001 +1 DISSIPATION FACTOR % CAPACITANCE CHANGE 100 50 TEMPERATURE °C 0 -1 0.0005 0.00025 -2 1 kHz 10 kHz 100 kHz 1 MHz 1 kHz FREQUENCY www.vishay.com 42 For technical questions, contact: [email protected] 10 kHz 100 kHz 1 MHz FREQUENCY Document Number: 45053 Revision: 28-Aug-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1