TZM5221B to TZM5267B www.vishay.com Vishay Semiconductors Small Signal Zener Diodes FEATURES • Very sharp reverse characteristic • Very high stability • Electrical data identical with the devices 1N5221B to 1N5267B • Low reverse current level • VZ - tolerance ± 5 % • AEC-Q101 qualified • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 PRIMARY CHARACTERISTICS PARAMETER VALUE APPLICATIONS UNIT VZ range nom. 2.4 to 75 V Test current IZT 1.7 to 20 mA VZ specification Thermal equilibrium Int. construction Single • Voltage stabilization ORDERING INFORMATION DEVICE NAME ORDERING CODE TAPED UNITS PER REEL MINIMUM ORDER QUANTITY TZM5521B to TZM5267B TZM5521B to TZM5267B-series-GS18 10 000 (8 mm tape on 13" reel) 10 000/box TZM5521B to TZM5267B TZM5521B to TZM5267B-series-GS08 2500 (8 mm tape on 7" reel) 12 500/box PACKAGE PACKAGE NAME WEIGHT MOLDING COMPOUND FLAMMABILITY RATING MOISTURE SENSITIVITY LEVEL SOLDERING CONDITIONS MiniMELF SOD-80 31 mg UL 94 V-0 MSL level 1 (according J-STD-020) 260 °C/10 s at terminals ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT Power dissipation RthJA = < 300 K/W Ptot 500 mW IZ Ptot/VZ mA RthJA 500 K/W Zener current Junction to ambient air On PC board 50 mm x 50 mm x 1.6 mm Junction temperature Storage temperature range Forward voltage (max.) Rev. 1.7, 22-Nov-12 IF = 200 mA Tj 175 °C Tstg - 65 to + 175 °C VF 1.1 V Document Number: 85609 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TZM5221B to TZM5267B www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) ZENER VOLTAGE RANGE (1) PART NUMBER VZ at IZT1 TEST CURRENT IZT1 V TZM5221B TZM5222B TZM5223B TZM5224B TZM5225B TZM5226B TZM5227B TZM5228B TZM5229B TZM5230B TZM5231B TZM5232B TZM5233B TZM5234B TZM5235B TZM5236B TZM5237B TZM5238B TZM5239B TZM5240B TZM5241B TZM5242B TZM5243B TZM5244B TZM5245B TZM5246B TZM5247B TZM5248B TZM5249B TZM5250B TZM5251B TZM5252B TZM5253B TZM5254B TZM5255B TZM5256B TZM5257B TZM5258B TZM5259B TZM5260B TZM5261B TZM5262B TZM5263B TZM5264B TZM5265B TZM5266B TZM5267B NOM. 2.4 2.5 2.7 2.8 3 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6 6.2 6.8 7.5 8.2 8.7 9.1 10 11 12 13 14 15 16 17 18 19 20 22 24 25 27 28 30 33 36 39 43 47 51 56 60 62 68 75 IZT2 mA 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 9.5 9 8.5 7.8 7.4 7 6.6 6.2 5.6 5.2 5 4.6 4.5 4.2 3.8 3.4 3.2 3 2.7 2.5 2.2 2.1 2 1.8 1.7 REVERSE LEAKAGE CURRENT 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 ZZ at IZT1 IR at VR μA < 100 < 100 < 75 < 75 < 50 < 25 < 15 < 10 <5 <5 <5 <5 <5 <5 <3 <3 <3 <3 <3 <3 <2 <1 < 0.5 < 0.1 < 0.1 < 0.1 < 0.1 < 0.1 < 0.1 < 0.1 < 0.1 < 0.1 < 0.1 < 0.1 < 0.1 < 0.1 < 0.1 < 0.1 < 0.1 < 0.1 < 0.1 < 0.1 < 0.1 < 0.1 < 0.1 < 0.1 < 0.1 DYNAMIC RESISTANCE ZZK at IZT2 f = 1 kHz V 1 1 1 1 1 1 1 1 1 2 2 3 3.5 4 5 6 6.5 6.5 7 8 8.4 9.1 9.9 10 11 12 13 14 14 15 17 18 19 21 21 23 25 27 30 33 36 39 43 46 47 52 56 TYP. < 30 < 30 < 30 < 30 < 29 < 28 < 24 < 23 < 22 < 19 < 17 < 11 <7 <7 <5 <6 <8 <8 < 10 < 17 < 22 < 30 < 13 < 15 < 16 < 17 < 19 < 21 < 23 < 25 < 29 < 33 < 35 < 41 < 44 < 49 < 58 < 70 < 80 < 93 105 125 150 170 185 230 270 TEMPERATURE COEFFICIENT TKVZ %/K TYP. < 1200 < 1250 < 1300 < 1400 < 1600 < 1600 < 1700 < 1900 < 2000 < 1900 < 1600 < 1600 < 1600 < 1000 < 750 < 500 < 500 < 600 < 600 < 600 < 600 < 600 < 600 < 600 < 600 < 600 < 600 < 600 < 600 < 600 < 600 < 600 < 600 < 600 < 600 < 600 < 700 < 700 < 800 < 900 < 1000 < 1100 < 1300 < 1400 < 1400 < 1600 < 1700 < - 0.085 < - 0.085 < - 0.080 < - 0.080 < - 0.075 < - 0.070 < - 0.065 < - 0.060 < ± 0.055 < ± 0.030 < ± 0.030 < + 0.038 < + 0.038 < + 0.045 < + 0.050 < + 0.058 < + 0.062 < + 0.065 < + 0.068 < + 0.075 < + 0.076 < + 0.077 < + 0.079 < + 0.082 < + 0.082 < + 0.083 < + 0.084 < + 0.085 < + 0.086 < + 0.086 < + 0.087 < + 0.088 < + 0.089 < + 0.090 < + 0.091 < + 0.091 < + 0.092 < + 0.093 < + 0.094 < + 0.095 < + 0.095 < + 0.096 < + 0.096 < + 0.097 < + 0.097 < + 0.097 < + 0.098 Note (1) Based on DC measurement at thermal equilibrium; case temperature maintained at 30 °C ± 2 °C Rev. 1.7, 22-Nov-12 Document Number: 85609 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TZM5221B to TZM5267B www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (inches): MiniMELF SOD-80 1.6 (0.063) 1.4 (0.055) Cathode indentification * 0.47 (0.019) max. 3.7 (0.146) 3.3 (0.130) * The gap between plug and glass can be either on cathode or anode side 2.5 (0.098) max. 1.25 (0.49) min. 2 (0.079) min. Foot print recommendation: Document no.:6.560-5005.01-4 Rev. 8 - Date: 07.June.2006 5 (0.197) ref. 96 12070 Rev. 1.7, 22-Nov-12 Document Number: 85609 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000