ULQ2001A - ULQ2003A ULQ2002A - ULQ2004A ® SEVEN DARLINGTON ARRAYS .. . .. . .. SEVEN DARLINGTONS PER PACKAGE EXTENDED TEMPERATURE RANGE (–40 to 105°C) OUTPUT CURRENT 500 mA PER DRIVER (600 mA PEAK) OUTPUT VOLTAGE 50 V INTEGRAL SUPPRESSION DIODES FOR INDUCTIVE LOADS OUTPUTS CAN BE PARALLELED FOR HIGHER CURRENT TTL/CMOS/PMOS/DTL COMPATIBLE INPUTS INPUTS PINNED OPPOSITE OUTPUTS TO SIMPLIFY LAYOUT DIP16 SO16 ORDERING NUMBERS: ULQ2001A/2A/3A/4A (DIP16) ULQ2001D1/2D1/3D1/4D1 (SO16) DESCRIPTION The ULQ2001A, ULQ2002A, ULQ2003 and ULQ2004A are high voltage, high current darlington arrays each containing seven open collector darlington pairs with common emitters. Each channel is rated at 500 mA and can withstand peak currents of 600 mA. Suppression diodes are included for inductive load driving and the inputs are pinned opposite the outputs to simplify board layout. The four versions interface to all common logic families : ULQ2001A General Purpose, DTL, TTL, PMOS, CMOS ULQ2002A 14-25V PMOS ULQ2003A 5V TTL, CMOS ULQ2004A 6-15V CMOS, PMOS PIN CONNECTION These versatile devices are useful for driving a wide range of loads including solenoids, relays DC motors, LED displays filament lamps, thermal printheads and high power buffers. The ULQ2001A/2002A/2003A and 2004A are supplied in 16 pin plastic DIP packages with a copper leadframe to reduce thermal resistance. They are available also in small outline package (SO-16) as ULQ2001D1/2002D1/2003D1/2004D1. February 2002 1/7 ULQ2001A - ULQ2002A - ULQ2003A - ULQ2004A SCHEMATIC DIAGRAM Series ULQ-2001A (each driver) Series ULQ-2002A (each driver) Series ULQ-2003A (each driver) Series ULQ-2004A (each driver) ABSOLUTE MAXIMUM RATINGS Symbol Parameter Value Unit Vo Output Voltage 50 V Vin Input Voltage (for ULQ2002A/D1 - 2003A/D1 - 2004A/D1) 30 V Ic Continuous Colletor Current 500 mA Ib Continuous Base Current 25 mA Tamb Operating Ambient Temperature Range –40 to 105 °C Tstg Storage Temperature Range –55 to 150 °C 150 °C Tj Junction Temperature THERMAL DATA Symbol Rth j-amb 2/7 Parameter Thermal Resistance Junction-ambient Max. DIP16 SO16 Unit 70 120 °C/W ULQ2001A - ULQ2002A - ULQ2003A - ULQ2004A ELECTRICAL CHARACTERISTICS Symbol ICEX (TJ = –40 to 105oC for DIP16 unless otherwise specified) (TJ = 25 to 105oC for SO16 unless otherwise specified) Parameter Output Leakage Current Test Conditions Min. Typ. VCE = 50V TJ = 105°C, VCE = 50V TJ = 105°C for ULQ2002A VCE = 50V, Vi = 6V for ULQ2004A VCE = 50V, Vi = 1V Max. Unit Fig. 50 100 µA µA 1a 1a 500 500 µA µA 1b 1b Collector-emitter Saturation Voltage IC = 100mA, IB = 250µA IC = 200mA, IB = 350µA IC = 350mA, IB = 500µA 0.9 1.1 1.3 1.1 1.3 1.6 V V V 2 2 2 Ii(on) Input Current for ULQ2002A for ULQ2003A for ULQ2004A 0.82 0.93 0.35 1 1.25 1.35 0.5 1.45 mA mA mA mA 3 3 3 3 Ii(off) Input Current TJ = 105°C, IC = 500µA Vi(on) Input Voltage for ULQ2002A for ULQ2003A VCE(sat) hFE Ci DC Forward Current Gain Vi Vi Vi Vi = = = = µA 4 13 2.4 2.7 3 5 6 7 8 V V V V V V V V 5 5 5 5 5 5 5 5 – 2 15 25 (*) pF – Turn-on Delay Time 0.5 Vi to 0.5 Vo 0.25 1 (*) µs – tPHL 0.25 1 (*) µs – 50 100 µA µA 6 6 2 V 7 50 for ULQ2004A VCE = VCE = VCE = VCE = VCE = VCE = VCE = VCE = for ULQ2001A VCE = 2V, IC = 350mA Input Capacitance tPLH 17V 3.85V 5V 12V Turn-off Delay Time 0.5 Vi to 0.5 Vo IR Clamp Diode Leakage Current VR = 50V TJ = 105°C, VR = 50V VF Clamp Diode Forward Voltage IF = 350mA 2V, 2V, 2V, 2V, 2V, 2V, 2V, 2V, 65 IC = 300mA IC = 200mA IC = 250mA IC = 300mA IC = 125mA IC = 200mA IC = 275mA IC = 350mA 1000 1.7 (*) Guaranteed by design 3/7 ULQ2001A - ULQ2002A - ULQ2003A - ULQ2004A TEST CIRCUITS Figure 1a. Figure 1b. Figure 2. Figure 3. Figure 4. Figure 5. Figure 6. Figure 7. 4/7 ULQ2001A - ULQ2002A - ULQ2003A - ULQ2004A mm DIM. MIN. TYP. A a1 inch MAX. MIN. TYP. 1.75 0.1 0.25 a2 MAX. 0.069 0.004 0.009 1.6 0.063 b 0.35 0.46 0.014 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 c1 0.020 45˚ (typ.) D (1) 9.8 10 0.386 0.394 E 5.8 6.2 0.228 0.244 e 1.27 0.050 e3 8.89 0.350 F (1) 3.8 4 0.150 0.157 G 4.6 5.3 0.181 0.209 L 0.4 1.27 0.016 0.050 M S OUTLINE AND MECHANICAL DATA 0.62 0.024 SO16 Narrow 8˚(max.) (1) D and F do not include mold flash or protrusions. Mold flash or potrusions shall not exceed 0.15mm (.006inch). 5/7 ULQ2001A - ULQ2002A - ULQ2003A - ULQ2004A mm DIM. MIN. a1 0.51 B 0.77 TYP. inch MAX. MIN. TYP. MAX. 0.020 1.65 0.030 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 17.78 0.700 F 7.1 0.280 I 5.1 0.201 L OUTLINE AND MECHANICAL DATA 3.3 0.130 DIP16 Z 6/7 1.27 0.050 ULQ2001A - ULQ2002A - ULQ2003A - ULQ2004A Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specification mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics © 2002 STMicroelectronics – Printed in Italy – All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - United States. http://www.st.com 7/7