STMICROELECTRONICS ULN2803A

ULN2801A
ULN2802A - ULN2803A
ULN2804A - ULN2805A
EIGHT DARLINGTON ARRAYS
.
..
..
..
EIGHT DARLINGTONS WITH COMMON EMITTERS
OUTPUT CURRENT TO 500 mA
OUTPUT VOLTAGE TO 50 V
INTEGRAL SUPPRESSION DIODES
VERSIONS FOR ALL POPULAR LOGIC FAMILIES
OUTPUT CAN BE PARALLELED
INPUTS PINNED OPPOSITE OUTPUTS TO
SIMPLIFY BOARD LAYOUT
DIP18
PIN CONNECTION (top view)
DESCRIPTION
The ULN2801A-ULN2805Aeach contain eight darlington transistors with common emitters and integral suppression diodes for inductive loads. Each
darlington features a peak load current rating of
600mA (500mA continuous) and can withstand at
least 50V in the off state. Outputsmay be paralleled
for higher current capability.
Five versions are available to simplify interfacing to
standard logic families : the ULN2801A is designed
for general purpose applications with a current limit
resistor ; the ULN2802Ahas a 10.5kΩ input resistor
and zener for 14-25V PMOS ; the ULN2803A has a
2.7kΩ input resistor for 5V TTL and CMOS ; the
ULN2804A has a 10.5kΩ input resistor for 6-15V
CMOS and the ULN2805A is designed to sink a
minimum of 350mA for standard and Schottky TTL
where higher output current is required.
All types are supplied in a 18-lead plastic DIP with
a copperlead from and featurethe convenientinputopposite-output pinout to simplify board layout.
September 1997
1/8
ULN2801A - ULN2802A - ULN2803A - ULN2804A - ULN2805A
SCHEMATIC DIAGRAM AND ORDER CODES
For ULN2801A (each driver for PMOS-CMOS)
For ULN2802A (each driver for 14-15 V PMOS)
For ULN2803A (each driver for 5 V, TTL/CMOS)
For ULN2804A
CMOS/PMOS
For ULN2805A (each driver for high out TTL)
2/8
(each
driver
for
6-15
V
ULN2801A - ULN2802A - ULN2803A - ULN2804A - ULN2805A
ABSOLUTE MAXIMUM RATINGS
Symbol
Vo
Vi
IC
IB
Ptot
Tamb
Tstg
Tj
Parameter
Output Voltage
Input Voltage
for ULN2802A, UL2803A, ULN2804A
for ULN2805A
Continuous Collector Current
Continuous Base Current
Power Dissipation
(one Darlington pair)
(total package)
Operating Ambient Temperature Range
Storage Temperature Range
Junction Temperature Range
Value
50
Unit
V
V
30
15
500
25
mA
mA
W
1.0
2.25
– 20 to 85
– 55 to 150
– 20 to 150
°C
°C
°C
THERMAL DATA
Symbol
Rth j–amb
Parameter
Thermal Resistance Junction-ambient
Value
Unit
55
°C/W
Max.
ELECTRICAL CHARACTERISTICS (Tamb = 25oC unless otherwise specified)
Symbol
ICEX
VCE(sat)
Ii(on)
Ii(off)
Vi(on)
hFE
Parameter
Output Leakage Current
Collector-emitter
Saturation Voltage
Input Current
Input Current
Input Voltage
DC Forward Current Gain
Ci
tPLH
tPHL
IR
Input Capacitance
Turn-on Delay Time
Turn-off Delay Time
Clamp Diode Leakage Current
VF
Clamp Diode Forward Voltage
Test Conditions
VCE = 50V
Tamb = 70°C, VCE = 50V
Tamb = 70°C
for ULN2802A
VCE = 50V, Vi = 6V
for ULN2804A
VCE = 50V, Vi = 1V
IC = 100mA, IB = 250µA
IC = 200mA, IB = 350µA
IC = 350mA, IB = 500µA
for ULN2802A Vi = 17V
for ULN2803A Vi = 3.85V
for ULN2804A Vi = 5V
Vi = 12V
for ULN2805A Vi = 3V
Tamb = 70°C, IC = 500µA
VCE = 2 V
for ULN2802A
IC = 300mA
for ULN2803A
IC = 200mA
IC = 250mA
IC = 300mA
for ULN2804A
IC = 125mA
IC = 200mA
IC = 275mA
IC = 350mA
for ULN2805A
IC = 350mA
for ULN2801A
VCE = 2V, IC = 350mA
0.5 Vi to 0.5 Vo
0.5 Vi to 0.5 Vo
VR = 50V
Tamb = 70°C, VR = 50V
IF = 350mA
Min.
50
Typ.
0.9
1.1
1.3
0.82
0.93
0.35
1
1.5
65
Max.
50
100
Unit
µA
µA
Fig.
1a
1a
500
µA
1b
500
1.1
1.3
1.6
1.25
1.35
0.5
1.45
2.4
µA
V
V
V
mA
mA
mA
mA
mA
1b
µA
4
13
V
2.4
2.7
3
V
V
V
5
6
7
8
V
V
V
V
2.4
V
25
1
1
50
100
2
–
pF
µs
µs
µA
µA
V
2
3
5
1000
15
0.25
0.25
1.7
2
–
–
–
6
6
7
3/8
ULN2801A - ULN2802A - ULN2803A - ULN2804A - ULN2805A
TEST CIRCUITS
Figure 1a.
Figure 1b.
Figure 2.
Figure 3.
Figure 4.
Figure 5.
Figure 6.
Figure 7.
4/8
ULN2801A - ULN2802A - ULN2803A - ULN2804A - ULN2805A
Figure 8 : Collector Current as a Function of
Saturation Voltage.
Figure 9 : Collector Current as a Function of
Input Current.
Figure 10 : Allowable Average Power Dissipation
as a Function of Ambient Temperature.
Figure 11 : Peak Collector Current as a Function
of Duty Cycle.
Figure 12 : Peak Collector Current as a Function
of Duty.
Figure 13 : Input Current as a Function of Input
Voltage (for ULN2802A).
5/8
ULN2801A - ULN2802A - ULN2803A - ULN2804A - ULN2805A
Figure 14 : Input Current as a Function of Input
Voltage (for ULN2804A)
Figure 16 : Input Current as a Function of Input
Voltage (for ULN2805A)
6/8
Figure 15 : Input Current as a Function of Input
Voltage (for ULN2803A)
ULN2801A - ULN2802A - ULN2803A - ULN2804A - ULN2805A
DIP18 PACKAGE MECHANICAL DATA
mm
DIM.
MIN.
a1
0.254
B
1.39
TYP.
inch
MAX.
MIN.
TYP.
MAX.
0.010
1.65
0.055
0.065
b
0.46
0.018
b1
0.25
0.010
D
23.24
0.915
E
8.5
0.335
e
2.54
0.100
e3
20.32
0.800
F
7.1
0.280
I
3.93
0.155
L
3.3
Z
1.27
0.130
1.59
0.050
0.063
7/8
ULN2801A - ULN2802A - ULN2803A - ULN2804A - ULN2805A
Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsibility for
the consequences of use of such information nor for any infringement of patents or other rig hts of third parties which may result from its
use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specification
mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously
supplied. SGS-THOMSON Microelectronics products are not authorized for use as critical components in life support devices or systems
without express written approval of SGS-THOMSON Microelectronics.
 1997 SGS-THOMSON Microelectronics – Printed in Italy – All Rights Reserved
SGS-THOMSON Microelectronics GROUP OF COMPANIES
Australia - Brazil - Canada - China - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco The Netherlands - Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A.
8/8