Preliminary SS22L THRU SS210L 2.0 AMPS. Surface Mount Schottky Barrier Rectifiers Voltage Range 20 to 100 Volts Current 2.0 Amperes Sub SMA Features For surface mounted application Low –PROFILE PACKAGE Ideal for automated placement Low power loss, high efficiency High temperature soldering: o 260 C / 10 seconds at terminals Mechanical Data Cases: Sub SMA plastic case Polarity: Color band denotes cathode end Packaging: 12mm tape per EIA STD RS-481 Weight approx. 15mg Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbo SS SS SS SS Type Number l Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage VRRM VRMS VDC Marking Code (Note 4) Maximum Average Forward Rectified Current at TL(See Fig. 1) Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage (Note 1) @ 2.0A Maximum DC Reverse Current @ TA =25℃ at Rated DC Blocking Voltage @ TA=100℃ Typical Junction Capacitance (Note 3) Typical Thermal Resistance ( Note 2 ) Operating Temperature Range Storage Temperature Range 22L 20 14 20 23L 30 21 30 24L 40 28 40 25L 50 35 50 SS 26L 60 42 60 SS Units 210L 100 V 70 V 100 V SS 29L 90 63 90 22LYM 23LYM 24LYM 25LYM 26LYM 29LYM 210LYM I(AV) 2.0 A IFSM 50 A VF 0.5 0.70 0.4 IR 20 Cj R θJL R θJA TJ TSTG -65 to +125 10.0 130 17 75 0.85 V 0.1 20 mA mA -65 to +150 -65 to +150 Notes: 1. Pulse Test with PW=300 usec, 1% Duty Cycle 2. Measured on P.C.Board with 0.27 x 0.27”(7.0 x 7.0mm) Copper Pad Areas. 3. Measured at 1 MHz and Applied Reverse Voltage of 4.0V D.C. 4. 22LYM: 2=2A, 2-20V, L-Low Profile, Y-Year Code, M-Month Code. 12.31.2004/ rev. A pF ℃/W ℃/W ℃ ℃ RATINGS AND CHARACTERISTIC CURVES (SS22L THRU SS210L) FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT AVERAGE FORWARD CURRENT. (A) 2.0 RESISTIVE OR INDUCTIVE LOAD 1.5 SS2L2-SS24L SS25L-SS210L 1.0 .50 PCB MOUNTED ON 0.2X0.2" (5.0X5.0mm) COPPER PAD AREAS PEAK FORWARD SURGE CURRENT. (A) FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE 50 8.3ms Single Half Sine Wave JEDEC Method AT RATED TL 40 30 20 10 0 0 50 60 70 80 90 100 110 120 130 140 150 1 160 o 100 FIG.4- TYPICAL REVERSE CHARACTERISTICS FIG.3- TYPICAL FORWARD CHARACTERISTICS 100 INSTANTANEOUS REVERSE CURRENT. (mA) 50 Tj=125 0C INSTANTANEOUS FORWARD CURRENT. (A) 10 NUMBER OF CYCLES AT 60Hz LEAD TEMPERATURE. ( C) 10.0 Tj=150 0C 1 Tj=25 0C PULSE WIDTH=300 S 1% DUTY CYCLE 0.1 SS22L-SS24L SS25L-SS210L TA=125 0C 10 1 TA=75 0C 0.1 0.01 TA=25 0C SS22L-SS24L SS25L-SS26L SS29L-SS210L 0.01 0.001 0 .2 .4 .6 .8 1.0 1.2 1.4 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 1.6 FORWARD VOLTAGE. (V) FIG.5- TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE.(pF) 400 Tj=25 0C f=1.0MHz Vsig=50mVp-p 100 10 0.1 SS29L-SS210L SS22L-SS24L SS25L-SS26L 1 REVERSE VOLTAGE. (V) 10 100 140