NARROW-PITCH, THIN AND SLIM CONNECTOR FOR BOARD-TO-FPC CONNECTION NARROW PITCH (0.4 mm) CONNECTORS F4S SERIES FEATURES Socket Header 1. Space-saving (3.6 mm widthwise) The required space is smaller than our F4 series (40-contact type): Socket — 27% smaller, Header — 38% smaller The small size contributes to the miniaturization of target equipment. Compliance with RoHS Directive 3. The simple lock structure gives tactile feedback that ensures a superior mating/unmating operation feel. Socket Simple lock structure ) cts nta .50 o 0c (4 10 3.6 0 Pickup width: 0.8mm Clips (soldering terminal)* at the four corners Clips (soldering terminal)* at the four corners Header ) cts nta 4 0( 2.6 0 9.8 o 0c 4. Gull-wing type terminals The gull-wing type terminals facilitate automatic mounting inspections. 5. Connectors for inspection available Connectors for inspection are available that are ideal for modular unit inspection and inspection in device assembly processes. APPLICATIONS * Clips for preventing the solder joints from being removed 2. Highly reliable has strong resistance to adverse environments. (See Page 6 for details of the structure) Note: If extra resistance to shock caused by dropping is required, we recommend using our previous F4 Series. Compact portable devices “Cellular phones, DVC, Digital cameras, etc” Example of Board-to-FPC connections Before mating FPC Reinforcing plate Narrow-pitch connectors F4S After mating Reinforcing plate (with FPC) PCB 1.0mm The simple lock mechanism ensures that the connector clicks into position when it is inserted for reliable single-action insertion on the PCB. ORDERING INFORMATION AXT 4 5: Narrow Pitch Connector F4S (0.4 mm pitch) Socket 6: Narrow Pitch Connector F4S (0.4 mm pitch) Header Number of contacts (2 digits) Mated height <Socket> 1: For mated height 1.0 mm 2: For mated height 1.2 mm <Header> 1: For mated height 1.0 mm 2: For mated height 1.2 mm Functions <Socket, Header> 2: Without positioning bosses Surface treatment (Contact portion / Terminal portion) <Socket> 4: Base: Ni plating Surface: Au plating (for Ni barrier available) <Header> 4: Base: Ni plating Surface: Au plating Note: Please note that models with a mated height of 1.0 mm (7th digit of part number is “1”) and 1.2 mm (7th digit of part number is “2”) are not compatible. panasonic-electric-works.net/ac Narrow-pitch connectors AXT5, 6 Narrow-pitch connectors AXT5, 6 PRODUCT TYPES Mated height 1.0mm 1.2mm Number of contacts 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 54 60 64 70 80 10 30 40 50 80 Part number Socket AXT510124 AXT512124 AXT514124 AXT516124 AXT518124 AXT520124 AXT522124 AXT524124 AXT526124 AXT528124 AXT530124 AXT532124 AXT534124 AXT536124 AXT538124 AXT540124 AXT542124 AXT544124 AXT546124 AXT548124 AXT550124 AXT554124 AXT560124 AXT564124 AXT570124 AXT580124 AXT510224 AXT530224 AXT540224 AXT550224 AXT580224 Packing Header AXT610124 AXT612124 AXT614124 AXT616124 AXT618124 AXT620124 AXT622124 AXT624124 AXT626124 AXT628124 AXT630124 AXT632124 AXT634124 AXT636124 AXT638124 AXT640124 AXT642124 AXT644124 AXT646124 AXT648124 AXT650124 AXT654124 AXT660124 AXT664124 AXT670124 AXT680124 AXT610224 AXT630224 AXT640224 AXT650224 AXT680224 Inner carton Outer carton 3,000 pieces 6,000 pieces Notes: 1. Order unit: For mass production: in 1-inner-box (1-reel) units Samples for mounting check: in 50-connector units. Please contact our sales office. Samples: Small lot orders are possible. Please contact our sales office. 2. The above part numbers are for connectors without positioning bosses, which are standard. When ordering connectors with positioning bosses, please contact our sales office. 3. Please contact us for connectors having a number of contacts other than those listed above. panasonic-electric-works.net/ac SPECIFICATIONS 1. Characteristics Electrical characteristics Mechanical characteristics Item Rated current Rated voltage Specifications 0.3A/contact (Max. 5 A at total contacts) 60V AC/DC Breakdown voltage 150V AC for 1 min. Insulation resistance Min. 1,000MΩ (initial) Contact resistance Max. 90mΩ Composite insertion force Composite removal force Contact holding force (Socket contact) Ambient temperature Max. 0.981N/contacts × contacts (initial) Min. 0.165N/contacts × contacts Soldering heat resistance Storage temperature Environmental characteristics Thermal shock resistance (header and socket mated) Lifetime characteristics Unit weight Based on the contact resistance measurement method specified by JIS C 5402. Measuring the maximum force. As the contact is axially pull out. No freezing at low temperatures. No dew condensation. –55°C to +85°C Peak temperature: 260°C or less (on the surface of the PC board around the connector terminals) 300°C within 5 sec. 350°C within 3 sec. –55°C to +85°C (product only) –40°C to +50°C (emboss packing) Insertion and removal life 50 times Infrared reflow soldering Soldering iron No freezing at low temperatures. No dew condensation. Sequence 1. –55 −30 °C, 30 minutes 2. ~ , Max. 5 minutes 3. 85 +30 °C, 30 minutes 4. ~ , Max. 5 minutes 5 cycles, insulation resistance min. 100MΩ, contact resistance max. 90mΩ H2S resistance (header and socket mated) Saltwater spray resistance (header and socket mated) No short-circuiting or damage at a detection current of 1 mA when the specified voltage is applied for one minute. Using 250V DC megger (applied for 1 min.) Min. 0.49N/contacts 120 hours, insulation resistance min. 100MΩ, contact resistance max. 90mΩ 24 hours, insulation resistance min. 100MΩ, contact resistance max. 90mΩ 48 hours, contact resistance max. 90mΩ Humidity resistance (header and socket mated) Conditions Bath temperature 40±2°C, humidity 90 to 95% R.H. Bath temperature 35±2°C, saltwater concentration 5±1% Bath temperature 40±2°C, gas concentration 3±1 ppm, humidity 75 to 80% R.H. Repeated insertion and removal speed of max. 200 times/ hours 20-contact type: Socket: 0.03 g Header: 0.01 g 2. Material and surface treatment Part name Molded portion Contact and Post Material LCP resin (UL94V-0) Copper alloy Surface treatment — Contact portion: Base: Ni plating Surface: Au plating Terminal portion: Base: Ni plating Surface: Au plating (except the terminal tips) The socket terminals close to the portion to be soldered have nickel barriers (exposed nickel portions). Metal clips: Sockets: Base: Ni plating Surface: Pd+Au flash plating (except the terminal tips) Headers: Base: Ni plating Surface: Au plating (except the terminal tips) panasonic-electric-works.net/ac Narrow-pitch connectors AXT5, 6 DIMENSIONS (Unit: mm) The CAD data of the products with a CAD Data mark can be downloaded from: http://panasonic-electric-works.net/ac Socket (Mated height: 1.0 mm and 1.2 mm) Dimension table (mm) A B±0.1 0.40±0.05 0.15±0.03 Terminal coplanarity D (Contact and clips (soldering terminal)*) (0.62) 3.60 2.36 (0.62) 0.08 3.00 0.80 (Suction face) CAD Data C0.15 2.00 3.60 Y note General tolerance: ±0.2 0.45 0.30±0.03 C±0.1 (0.80) Z note Mated height/ dimension 1.0mm 1.2mm Note: Since the clip (soldering terminal)* has a single-piece construction, sections Y and Z are electrically connected. D 0.97 1.17 Header (Mated height: 1.0 mm and 1.2 mm) D Terminal coplanarity 0.08 1.68 (0.46) 13 C 0. 1.86 2.60 5 (Post and clips (soldering terminal)*) .1 A B±0.1 0.40±0.05 0.15±0.03 Number of contacts/ dimension 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 54 60 64 70 80 A B C 4.5 4.9 5.3 5.7 6.1 6.5 6.9 7.3 7.7 8.1 8.5 8.9 9.3 9.7 10.1 10.5 10.9 11.3 11.7 12.1 12.5 13.3 14.5 15.3 16.5 18.5 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4 4.8 5.2 5.6 6.0 6.4 6.8 7.2 7.6 8.0 8.4 8.8 9.2 9.6 10.4 11.6 12.4 13.6 15.6 3.4 3.8 4.2 4.6 5.0 5.4 5.8 6.2 6.6 7.0 7.4 7.8 8.2 8.6 9.0 9.4 9.8 10.2 10.6 11.0 11.4 12.2 13.4 14.2 15.4 17.4 A B C 3.8 4.2 4.6 5.0 5.4 5.8 6.2 6.6 7.0 7.4 7.8 8.2 8.6 9.0 9.4 9.8 10.2 10.6 11.0 11.4 11.8 12.6 13.8 14.6 15.8 17.8 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4 4.8 5.2 5.6 6.0 6.4 6.8 7.2 7.6 8.0 8.4 8.8 9.2 9.6 10.4 11.6 12.4 13.6 15.6 3.2 3.6 4.0 4.4 4.8 5.2 5.6 6.0 6.4 6.8 7.2 7.6 8.0 8.4 8.8 9.2 9.6 10.0 10.4 10.8 11.2 12.0 13.2 14.0 15.2 17.2 Dimension table (mm) R0 0.80 (Suction face) CAD Data 3 1 0. C 1.90 Clip (soldering terminal)* 0.15±0.03 C±0.1 0.94 (0.48) Clip (soldering terminal)* General tolerance: ±0.2 Mated height/ dimension 1.0mm 1.2mm D 0.83 1.01 Number of contacts/ dimension 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 54 60 64 70 80 Header Socket Mated height: 1.0 mm Header Socket 1.20±0.15 • Socket and Header are mated 1.00±0.15 Narrow-pitch connectors AXT5, 6 Mated height: 1.2 mm panasonic-electric-works.net/ac AXT5, 6 • Specifications for the plastic reel (In accordance with EIAJET-7200B.) • Specifications for taping (In accordance with JIS C 0806-1990. However, not applied to the mounting-hole pitch of some connectors.) Tape I Tape II A±0.3 D±1 A±0.3 C 4 2 8.0 1.5+0.1 0 dia. Top cover tape 1.75 380 dia. C Leading direction after packaging Leading direction after packaging Taping reel B 1.75 Narrow-pitch connectors EMBOSSED TAPE DIMENSIONS (Unit: mm) (Common to all sockets and headers) 4 2 Embossed carrier tape Embossed mounting-hole 8.0 1.5+0.1 0 dia. • Dimension table (Unit: mm) Type/Mated height Number of contacts Type of taping A B C D Quantity per reel Common for sockets and headers: 1.0mm, 1.2mm 24 or less 26 to 70 80 Tape I Tape I Tape II 16.0 24.0 32.0 — — 28.4 7.5 11.5 14.2 17.4 25.4 33.4 3,000 3,000 3,000 • Connector orientation with respect to embossed tape feeding direction Type Common for F4S Direction of tape progress Socket Header Note: There is no indication on this product regarding top-bottom or left-right orientation. panasonic-electric-works.net/ac AXT5, 6 Narrow-pitch connectors CONNECTOR FOR INSPECTION USAGE APPLICATIONS WITH 3,000 INSERTION AND (0.4 mm PITCHES) REMOVAL TIMES NARROW PITCH CONNECTOR F4S FOR INSPECTION USAGE Socket Header Compliance with RoHS Directive FEATURES APPLICATIONS 1. 3,000 insertion and removals (when as recommended) 2. Same external dimensions and foot pattern as standard type. 3. Improved mating Insertion and removal have become easier due to a reduction in the mating retention force required by the simple locking structure and also in the amount of force needed for insertion and removal. (We cannot warrant anything regarding mating retention.) Ideal for module unit inspection and equipment assembly inspection TABLE OF PRODUT TYPES ✩: Available for sale Product name F4S for inspection 10 ✩ 12 ✩ 14 ✩ 16 ✩ 18 ✩ 20 ✩ 22 ✩ 24 ✩ 26 ✩ 28 ✩ 30 ✩ Number of contacts 32 34 36 38 ✩ ✩ ✩ ✩ 40 ✩ 42 ✩ 44 ✩ 46 ✩ 48 ✩ 50 ✩ 54 ✩ 60 ✩ 64 ✩ 70 ✩ 80 ✩ Notes: 1. Please inquire about numbers of contacts other than those given above. 2. Please inquire with us regarding delivery times. 3. Please keep the minimum unit for ordering no less than 50 pieces per lot. 4. Please inquire for further information. PRODUCT TYPES Socket Specifications Without positioning bosses Part No. AXT5E∗∗26 Header Specifications Without positioning bosses Part No. AXT6E∗∗26 Notes: 1. When placing an order, substitute the “∗” (asterisk) in the above part number with the number of contacts for the required connector. 2. The above part numbers are for connectors without positioning bosses, which are standard. When ordering connectors with positioning bosses, please contact our sales office. panasonic-electric-works.net/ac NOTES Recommended PC board pattern (TOP VIEW) 0.23±0.03 0.40±0.03 : Insulation area 0.80±0.03 0.45±0.03 2.06±0.03 0.75±0.03 (0.655) 1.80±0.03 (1.20) 0.90±0.03 0.70±0.03 0.23±0.03 0.40±0.03 Max. 1.00 (0.75) 1.70±0.03 3.20±0.03 • Header Recommended PC board pattern (TOP VIEW) (0.92) 2.36±0.03 4.20±0.03 • Socket : Insulation area Metal mask thickness: When 150µm (Terminal opening ratio: 48%) (Metal-part opening ratio: 100%) 0.80±0.01 0.45±0.01 2.06±0.01 0.75±0.01 (0.655) 4.20±0.01 1.80±0.01 (1.20) 0.90±0.01 0.70±0.01 0.20±0.01 0.40±0.01 (0.41) 2.18±0.01 3.00±0.01 Recommended metal mask opening pattern Metal mask thickness: When 150µm (Terminal opening ratio: 48%) (Metal-part opening ratio: 100%) (0.51) 2.98±0.01 4.00±0.01 Recommended metal mask opening pattern 0.20±0.01 0.40±0.01 Metal mask thickness: When 120µm (Terminal opening ratio: 60%) (Metal-part opening ratio: 100%) 0.20±0.01 0.40±0.01 0.80±0.01 0.45±0.01 2.06±0.01 0.75±0.01 (0.655) 0.90±0.01 0.70±0.01 (0.52) 1.96±0.01 3.00±0.01 Recommended metal mask opening pattern Metal mask thickness: When 120µm (Terminal opening ratio: 60%) (Metal-part opening ratio: 100%) (0.63) 2.74±0.01 4.00±0.01 Recommended metal mask opening pattern 4.20±0.01 1.80±0.01 (1.20) 1. If extra resistance to drop impact is required, we recommend using our F4 series. 2. Recommended PC board and metal mask patterns Appropriate control of solder amount is required to minimize solder bridges and other defects for connectors with 0.4-mm or 0.5-mm pitch terminals, which require high-density mounting. Refer to the righthand drawing for recommended patterns. 0.20±0.01 0.40±0.01 For other details, please verify with the product specification sheets. panasonic-electric-works.net/ac Narrow-pitch connectors AXT5, 6