smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 7 Features Typical Applications • Card detection switch • Consumer • Compatible with lead free THT soldering • Set-top box • Chamfered opening in the card entry slot improves the card guidance • Pay TV Mechanical Number of Contacts Mechanical life Card insertion force Card extraction force Contact force Full Size CCM01 Series Contact Electrical Data Insulation resistance Resistance Current rating Dielectric strength 8 See table See table 1 N min / 10 N max 0,2N / 0,50 N max 1,000 MΩ min 100 mΩ max 10 µA min / 1 A max 750 Vrms min Switch Electrical Data Packaging Card detection switch Contact resistance Dielectric strength Current rating Maximum power Tray 30 parts / Cartons 300 parts Soldering Normally closed 100 mΩ max 250 Vrms min 1 mA min / 10 mA max 0,2 VA Compatible with lead free THT soldering process Environmental Data Operating temperature Damp heat Salt mist RoHS compliant -20°C to +70°C IEC 512 test number 11c (10 days) IEC 512 test number 11f (96 hours) Termination Contact Plating Height (mm) Operating Life Operating Temperature Card Insertion Force CCM01-6202MLFT THT gold 6,75 10,000 cycles -20˚C/+70˚C 10N CCM01-6101LFT THT gold 3,9 30,000 cycles -20˚C/+70˚C 10N Designation Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 7 smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 8 CCM01 Series CCM01-6202M LFT 61,1±0,2 3,81 0,7 29 29 A (50,3) 2 metal clips Designation & Date-Code area (Year-Day range in the year) 2,9±0,3 Card stop A A-A 10 16,51 18,85 B 15,4±0,2 A B ø 3,1 20 10 36,4±0,2 6202T 10,4 5,9±0,2 3,9 X-XXX (40) 4 0,75±0,25 11,75±0,25 19,37±0,25 0,6 A B 22,12 Card stop 3x 2,54 10x 4,2 6,75 4 Snap feet 1,6 PCB Thickness 10,65 (6,75) 1,6 PCB Thickness 25˚ 40±0,2 4x 0,4 A 19,05 16,51 10 0 0 18,31 3,7±0,2 Card entry C8 C7C6 C5 SW Card end travel C4 C3C2 C1 SW switch terminals (3,81) (3,81) Plastic outline 29,74 27,2 24,66 22,12 RECOMMENDED PC BOARD LAYOUT (Component side) 58 Full Size Embossed Channel (58) 0,9±0,05 Card entry 54,2 +0,2 0 Card entry 10 Soldering areas for metallic clips (ø 5,6) Contact location according to ISO/IEC 7816-2 +0,1 10x ø 10 ø 0,1 4x ø 0,1 +0,1 ø 3,2 0 Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 8 smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 9 CCM01 Series CCM01-6101 LFT 61,1±0,2 +0,2 0 Card entry 0,9±0,05 Card entry 54,2 (58) 3,81 4 Snap feet 1,6 PCB Thickness 22,12 3x 2,54 10x 0,6 A B 0,7 29 29 (50,3) A (40) A-A 5,9±0,2 Designation & Date-Code area (Year-Day range in the year) A 11,75±0,25 19,37±0,25 4 A B ø 3,1 19,05 20 10 36,4±0,2 40±0,2 6101T X-XXX 0,75±0,25 B 10 15,4±0,2 19,05 2,54 Card stop Card stop 2,9±0,3 4x 58 33,55 29,74 27,2 22,12 0 24,66 RECOMMENDED PC BOARD LAYOUT (Component side) Plastic outline 3,7±0,2 Card entry 0,4 Pick and place area ø 8 A C1 C2 C3 C4 SW 19,05 16,51 Card end travel switch terminals SW (3,81) (3,81) 10 0 10 19,05 Contact location according to ISO/IEC 7816-2 C5 C6 C7 C8 +0,1 ø10 10x 4x ø 0,1 ø 0,1 ø 3,2 +0,1 0 Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 9 Full Size 4,2 (3,9) 25˚ 6101T X-XXX 3,9 6,8 Embossed Channel