CCM02 MK I CCM02 MK I is a connector with landing contacts. Features • Available with 8 through hole contacts. • 100,000 card insertion cycles. • The contacts do not touch the card until it is almost fully inserted a minimal wiping action removes any non-conductive material. • The connector has been designed to give a positive feel as the card is fully inserted. • For added reliability, the integrated card end-travel switch (which is normally open) is sealed against dust and grit. Construction Contacts Plating Copper alloy Contact area : Gold over Nickel Terminals : Tin lead (2µ min) Thermoplastic UL 94V-0 rated Moldings Mechanical Data Number of Contacts Mechanical life Card insertion force Card extraction force Contact force Vibration Shock 8 100,000 cycles min 10 N max 1 N min / 10 N max 0.15 N min / 0.35 N max Frequency 10 to 500 Hz. Acceleration 50m/s2 Duration 6 hours - amplitude 0,35 mm Max electrical discontinuity 1µs Peak value 500 m/s2 – Duration 11 ms 3 shocks in each direction of each axis Max electrical discontinuity 1 µs Contact Electrical Data Insulation resistance Resistance Current rating Dielectric strength 1,000 MΩ min 100 mΩ max 10 µA min / 1 A max 750 Vrms min Switch Electrical Data Card detection switch Contact resistance Dielectric strength Current rating Maximum power Normally open 100 mΩ max 250 Vrms min 1 mA min / 10 mA max 0.2 VA Environmental Data Operating temperature Soldering temperature Damp heat Salt mist Card detection switch -40°C to +85°C Wave: 260°C / 5 sec IEC 512 test number 11c (10 days) IEC 512 test number 11f (96 hours) Sealed IP 54 Ordering Code Part Number CCM02-1N0-3 CCM02-1N0-32 CCM02-1N0-35 Number of Contacts 8 8 8 with extended cover Packaging Multiple 300 300 200 Packaging 30 per tray, 10 trays per box. Exception: CCM02-1NO-35, 20 per tray, 10 per box. Dimensions are shown in mm Dimensions subject to change www.ittcannon.com 13 CCM02 MK I Dimensional Drawings CCM02-1NO-32 5,8 4,3+0,1 0 0,6 x 0,3 3,1 38,1 6 0 ø 3,1-0,05 ø0,1A B 7,62 7,62 5,08 1 18,68 51,5 2 REF Marking : designation & date-code 2 REF Card stop 55,55 B 35,25 40 24 9,05 50,4 REF ø0,3A B 5,8 1 1,6 PCB Layout CCM02-1NO-32 (8 contacts through hole) 9,05 (Component Side) 24 38,1 7,62 6 5 Drawings shown for reference only. For other part numbers please consult your local Cannon Customer Service Center. 1 14,5 1 5,08 7,62 7,62 18,68 51,5 (3x2,54) Unless otherwise stated, tolerances are ± 0,10 mm Dimensions are shown in mm Dimensions subject to change www.ittcannon.com 14