CCM05 SD, MMC & miniSD For one of the most common card formats, we offer various reading options in a small and sturdy packaging. This includes the smaller standard of the miniSD, designed for the mobile communication needs. Features • Accept both MMC and SD card (except 5502) • Standard and reverse reading • Long or short cover • Smooth push push mechanism • Card detect and write protect switches • Front metal tab for better PCB tear-off resistance • Front cover retention for temper resistant card entrance • Low profile push push connectors (2.65 mm for SD, 2.10 mm for miniSD) Physical Data Contacts Contact finish (towards the card) Write protect contact Card detect contact Contact finish (towards the PCB) Metal cover Cover ground tails Molding Phosphor bronze Gold over nickel Copper alloy / nickel overall finish Copper alloy / nickel overall finish Gold over nickel Copper alloy / nickel plated overall Gold plated over nickel High temp. Thermoplastic, UL 94V-0 Mechanical Data Number of contacts Operating life standard & reverse type Operating life push-push type Contact force (signal contact) Card insertion force Card withdrawal force Vibration Mechanical shock 7 (MMC), 9 (SD),10 (miniSD) ≥ 10,000 cycles ≥ 5,000 cycles 0.20 N min. 40 N max. 2 N min. According to IEC 512 part 4, test 6d. 10 to 500 Hz / 50m/s2 / 3 axis / 2 hours per axis No discontinuity > 1 µs Peak value 500 m/s2 11ms. 3 shock in each direction of each axis. No electrical discontinuity 1 µs. Contact Electrical Data Voltage / ct Current / ct Contact resistance Voltage proof Insulation resistance ≤ 5 Vdc ≤ 500 mA ≤ 100 milliohms ≥ 500 Vrms 1000 MΩ min. Environmental Data Operating temperature Storage temperature Soldering temperature Moisture resistance Corrosion -25°C / +85°C -40°C / +85°C 230°C / 5 sec according to MIL-STD-202F, method 208 40°C / 93% HR / 96 hours. According to MIL-STD-202F, method 103B, test condition B 48 hours according to IEC 512 test 11f Ordering Code CCM05-5502 R901 CCM05-5761 R601 CCM05-5770 T48 CCM05-5772 T45 CCM05-5773 T50 CCM05-5775 T48 CCM05-5776 T50 CCM05-5777 T50 CCM05-5778 T45 MMC card 2 pegs short cover SD card & MMC stand off SD card & MMC 2 pegs with chamfer SD card & MMC 2 pegs push-push miniSD card SD card & MMC 2 pegs miniSD card push-push SD card & MMC 2 pegs short cover SD card 2 pegs reverse Packaging Please look at part number designation to determine packaging: T = Tray R = tape on reel - please contact Customer Service for quantity. Dimensions are shown in mm Specifications and dimensions subject to change www.ittcannon.com CCM05 SD, MMC & miniSD CCM05-5502 DETAIL A Card stop 2,75 0,95 30?0' 0,3 1,5 0,4 45?0' 0,35 1 SEE DETAIL A 0,8 RECOMMENDED PC BOARD LAYOUT 11,1 (REF.) (Component side) 1 1 XX-XXX 2,9 2,6 Pad Date Code area 0,7 1 Pick and place area ø1±0,02 Contact foot area 0,8 x 1 Plastic outline 2x 0,2 A ø4 ø 1,2 2x 1 2,2 11,1 Pad Grounding foot area 1x1 Prohibited area CCM05-5761 Card stop 0,65 ( Component side ) 2,6 18,25 2,4 2,4 2,76 2,4 3,24 2,4 1 1 2,3 A 0,7 1,2 DETAIL WRITE PROTECT SWITCH NO FOR SD CARD Dimensions are shown in mm Specifications and dimensions subject to change www.ittcannon.com 0,5 max Write protect "off" switch "open" Plastic outline C8 C7 C6 C5 C4 C3 C2 C1 C9 Pad Contact foot area 0,8 x 0,7 1,5 XXX Date-code area 9,6 7,2 4,8 2,4 0 2,4 4,8 7,2 9,6 2,4 Pick and place area ø4 12,34 2,4 A 12,76 11,86 27,6 20,3 26 24,3 2,4 2,4 2,3 13,56 5,3 1,9 4 0,7 4,6 10,1 1 1,9 2,2 Write protect "on" switch "closed" 1,5 (9x) 6,55 7,4 5,6 3,55 2 1,7 Switch foot area 0,7 x 0,6 1,3 SEE DETAIL SWITCH 23,3 1 0,75 0,5 2,6 2,1 9,8 10,3 11,05 12,4 Pad 1,7 10,3 13,34 12,85 0,5 11,15 11,5 12,86 12,35 0,8 2,1 0,75 1 ø 1,2 12,76 0,1 0 -0,1 45˚ 3,65 0,2 1 2,9 0,5 0,2 0,75 2,1 A-A 3,1 0,4 19,35 Grounding foot area 1,5 x 0,7 12,475 10,9 7,5 5 2,5 0 2,5 5 7,5 10,5 C7 C6 C5 C4 C3 C2 C1 0 20,32 1,7 12,2 9,525 12,425 A 1,3 6x 2,54 20,32 1,55 3,7 8,6 1 A 7,62 5,08 2,54 2,54 5,08 7,62 10,795 26,2 8,6 24,2 A 1,5 1,8 Contact location according to MMCA specification 1 1,55 8,15 7x A 1 1 0,75 1 0,3 11,1 7x 16,25 9,95 7,75 0,2 1 (REF.) 1,8 0,1 -0,10 0,8 11,1 (REF.) (3,6 max includes solder tails) 3,45 1 (REF.) 2,2 3,05 0,2 1,25 2 CCM05 SD, MMC & miniSD CCM05-5770 / CCM05-5775 SEE DETAIL A 2 2,8 CCM05-5775 DETAIL A 2,8 SEE DETAIL A RECOMMENDED PC BOARD LAYOUT ( Component side ) 0,8 10x Scale 2,5 2,05 0,7 1,3 21 28,8 1 1,5 ø1,5 24,15 21 6x 2,5 = 15 9,375 2,425 ø1 11,5 14 25,8 A 24,3 A 11,5 14,4 1,7 2 13,25 28 26,5 1,5 ø1,1 ±0,05 26,6 Card detection switch Logo Date code area Write protect Card detect indication 1,2 2 0,1 -0,10 3,2 CCM05-5770 ø1,6 ±0,05 2 17,6 2,8 1,5 1,1 2,4 21,5 Plastic outline 5 Ground pad 4x 0,85 25 CCM05-5777 (short cover) 0,85 1,5 24,15 2,8 2 ø1 ø 1,5 21 RECOMMENDED PC BOARD LAYOUT ( Component side ) 26,6 1,2 25,5 1,3 9,375 1,7 2,425 1 2,5 X 6 = 15 0,7 ø 1,6±0,05 #4 #3 #2 #1 5,13 #9 3,4 0,5 0,73 1,75 1,7 2,43 0,5 ø 1,1±0,05 0,5 Card detect indication 1,5 11,5 ±0,05 5,88 21±0,05 14,4 26,6 26,5 27,7 Dimensions are shown in mm Specifications and dimensions subject to change www.ittcannon.com 2,8 2,69 R1 2x 19 Pattern prohibited area Ground pad 4x Outer dimension of connector 2,27 0,13 Write protect 28,8 14,5 2,5 16,69 #8 #7 #6 #5 0,9 2,07 17,7 16,5 2,05 2 2,4 1,5 1,2 24,3 CCM05 SD, MMC & miniSD CCM05-5778 (reverse) 24,15 ±0,1 RECOMMENDED PC BOARD LAYOUT 1,6 12,78 0,85 (Component side) 0,12 28,3 2,35 (2,5x6) = 15 2,425 0,5 4,925 0,9 1,7 1,8 Write protect 14,75 14 ø1,65±0,02 (2x) 1,75 19,5 7,5 2,2 13,5 9,4 11,3 Pattern prohibited area 1,8 1 6,4 6,8 10,855 3,5 2,5 Pattern prohibited area 3,4 6,4 10,85 7,5 8,35 1,7 0,3 13,1 19,5 1,5 1,5 8,35 3,1 Card detect 28,3 10,07 (2,5x6) = 15 2,5 2,5 ø1,5 x2 25,3 2,05 8,93 Date code 11,2 9,8 Detect/protect ground pad x2 16 25,3 27,8 32,5 Outer dimension of connector Card center line Connector center line 0,7 24 30,9 Card edge Connector center line CCM05-5772 (push push) RECOMMENDED PC BOARD LAYOUT (Component side) 15 2,5 ø 1,4 -0,10 2,425 24,2 3,35 1,7 28,5 1,7 0,63 www.ittcannon.com 2 CARD CL 23,7 2,8 24,3 1,2 29,2 2,1 24,2 ±0,05 5,7 1,4 2,6 2,33 13,9 0,69 15 (6x 2,5) 18,2 R1 4x 2,43 8,2 7,5 24 1 (over stroke) 5 (card eject stroke) CARD C/L 2,5 CONNECTOR C/L R11 13,65 Dimensions are shown in mm Specifications and dimensions subject to change 2,1 0,5 1,2 14,5 13 Pattern prohibited area 35 29 1,7 Ground pad 2x 1 #2 #1 #9 WP #8 #7 #6 #5 #4 0,8 #3 CD 2,5 Outer dimension of connector Pattern prohibited area 0,95 2,5 2x 3,3 9 2,65 15,3 0,45 0,21 0,29 0,5 Date-Code area 0,5 1,2 5,5 10 9,375 1,65 2x 2,5 1,08 1,5 0,7 0,85 24,1 12,1±0,05 14,2 ø1,5±0,05 22,2 14 14,9 CCM05 SD, MMC & miniSD CCM05-5773 (miniSD) 21,9 10,95 10,95 P 1,30 X 10 = 13 6,5 Housing center 0,55 Card center 1,3 TYP. RECOMMENDED PC BOARD LAYOUT (Component side) 2 2,75 6,26 22,7 20,5 16,5 2,05 1,95 16,5 10,95 6,05 0,95 Housing center Card center 2,75 3,3 2 1,4 Date code area #8 #4 #2 #1 6,25 0,8 #5 #6 #7 #10 #3 Pattern prohibited area #9 3,75 1,5 Card detect 0,5 #11 0,25 1,25 Logo 13 ø1,20,05 Ground pad 2x 0,55 2,1 8 6,6 1,1 13 20,5 0,7 0,45 2 2,4 22,1 2,65 1,3 TYP. 0,7 10,95 6,5 9,9 P 1,3 X 10 = 13 21,9 Card Edge CCM05-5776 (push push) RECOMMENDED PC BOARD LAYOUT (Component side) P 1,3 X 10 = 13 10,475±0,05 6,5±0,05 1,3±0,05 0,7 1,325 Card center 1,3 ±0,1 1,2 Card detect 1,3 Housing center 11,525 10,475 ±0,15 P 1,3 X 10 = 13 1,325 6,5 ±0,15 0,45 0,4 23,15 1,45 2,1 24,65 19 6,8 Date Code #4 #11 #1 #9 #2 #10 #3 15,5 #5 0,95 Housing center 60? 9,475 ø1,2 +0,1 0 2x 4 5 (card eject stroke) 1 (over stroke) 30 Pattern prohibited area 2,1 18,5 2 15,5 18,5 15,5 #8 #7 #6 0,15 0,25 2 1 0,1 Card center Ground pad 2x 19 4 3 1,1 23,05 To learn more about our CCM05 SD & MMC product lines, please visit www.ittcannon.com Customer Support Locations France: +33.(0) 1.60.24.51.51 UK: +44.1256.311850 Dimensions are shown in mm Specifications and dimensions subject to change www.ittcannon.com Germany: +49 (30) 43.9990 USA: 800.635.5936 Hong Kong: +852.2732.2720