Certificate TH97/10561QM 1N5802 - 1N5806 Certificate TW00/17276EM GLASS PASSIVATED JUNCTION ULTRA FAST RECTIFIERS PRV : 50 - 150 Volts Io : 2.5 Amperes DO - 41 FEATURES : * * * * * * * * Glass passivated chip High current capability High surge current capability High reliability Low reverse current Low forward voltage drop Ultrafast recovery time Pb / RoHS Free 1.00 (25.4) MIN. 0.107 (2.7) 0.080 (2.0) 0.205 (5.2) 0.161 (4.1) 1.00 (25.4) MIN. 0.034 (0.86) 0.028 (0.71) MECHANICAL DATA : * Case : DO-41 Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, Method 208 guaranteed * Polarity : Color band denotes cathode end * Mounting position : Any Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified . Single phase, half wave,60 Hz, resistive or inductive load. For capacitive load, derate current by20%. RATING Maximum Working Peak Reverse Voltage Minimum Breakdown Voltage @ 100µA Maximum Average Forward Current SYMBOL 1N5802 1N5803 1N5804 1N5805 1N5806 UNIT VRWM 50 75 100 125 150 V VBR(Min) 55 80 110 135 160 V IF(AV) 2.5 (TL = 75°C, Note 1) 1.0 (Ta = 55°C) A Maximum Peak Forward Surge Current, IFSM 35 A Maximum Peak Forward Voltage at I F = 1.0 A. VF 0.875 V Maximum DC Reverse Current IR 1.0 at Rated DC Blocking Voltage IR(H) 50 (Ta = 100°C) Maximum Reverse Recovery Time (Note 3) Trr 25 ns Junction Temperature Range TJ - 65 to + 175 °C Storage Temperature Range TSTG - 65 to + 175 °C 8.3ms Single half sine wave superimposed on rated load (JEDEC Method) μA Notes : (1) IF(AV) = 2.5A @ T L=75°C at 3/8 inc lead length. Derate at 25mA/°C for TL above 75°C. (2) Reverse Recovery Test Conditions: IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A. Page 1 of 1 Rev. 0 : January 16, 2007