FB1285 Filter Shape Centre Frequency F0 Insertion Loss at F0 Passband Passband Amplitude Ripple 60 to 79 MHz2 Passband Amplitude Ripple 60 to 80 MHz2 Passband Group Delay Ripple 60 to 79 MHz Passband Group Delay Ripple 60 to 80 MHz Attenuation at 86.5 MHz wrt 70 MHz Stopband Attenuation wrt 70 MHz Impedance Operating Temperature Aqueous Washable Package 1 2 Bandpass 70.0 MHz < 7.0 dB (typically 6.4 dB) 70 ± 10 MHz < 0.2 dB1 pk-pk (target) < 0.3 dB1 pk-pk (spec.) < 0.2 dB1 pk-pk (target) < 0.5 dB1 pk-pk (spec.) < 4 ns1 (target) < 6 ns1 (spec.) < 4 ns1 (target) < 8 ns1 (spec.) > 55 dB > 40 dB from 92 to 97 MHz > 49 dB from 97 to 109 MHz > 40 dB from 109 to 150 MHz > 30 dB from 150 to 200 MHz > 18 dB below 53 MHz 50 ohms 0°C to 70°C No DR00237A When measured against system response values in table 1. Passband Amplitude Ripple typically increases by 0.1 dB over temperature range. Table 1 Frequency MHz 60 61 62 63 64 65 66 67 68 69 70 Amplitude dB -0.523 -0.435 -0.412 -0.419 -0.432 -0.433 -0.416 -0.383 -0.340 -0.289 -0.239 Delay ns 0 -5.527 -10.303 -14.293 -17.469 -19.911 -21.762 -23.170 -24.265 -25.150 -25.899 Frequency MHz 71 72 73 74 75 76 77 78 79 80 Amplitude dB -0.192 -0.151 -0.116 -0.088 -0.066 -0.048 -0.034 -0.022 -0.010 0.0 Delay ns -26.561 -27.165 -27.724 -28.242 -28.715 -29.141 -29.514 -29.831 -30.092 -30.298 © Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice FARA150s.doc Page 1 of 2 Jan-01(B) PACKAGE DETAIL All dimensions in millimetres (inches). Gen Tolerance ± 0,05 (0.002) unless otherwise stated. DO NOT SCALE © Faraday Technology Ltd Croft Road Newcastle-U-Lyme ST5 0QZ England Tel (044) 01782 661501 Fax 630101 62,4 (2.457) Max Third Angle Projection 6,2 (0.244) Nom 50 (1.97) 40 (1.57) 20 (0.787) 10 (0.393) 14 13 23 (0.9) 27,4 (1.08) Max 2,2 (0.086) Nom 30 (1.18) 12 11 10 9 TOP VIEW 1 2 3 4 5 6 7 8 5 (0.196) 45 (1.77) Notes; Pins Matl; Brass with Gold over Copper. Pins Size; 0,64 (0.025) Dia. 12,7 (0.5) Max Pin Assignments; Pin 1 = Input. Pin 8 = Output Template: DT00237 Change Note No; Auth: C Snell Date: 17/08/99 Faraday Technology Ltd. Croft Road Industrial Estate, Newcastle, Staffordshire ST5 0QZ. England. FARA150s.doc Date: 17/08/99 Title: Drg No: FILTER ASSY OUTLINE Tel: Fax: Email: Web site: Page 2 of 2 DR00237A + 44 (0)1782 661501 + 44 (0)1782 630101 [email protected] http://www.faradaytech.co.uk Jan-01(B) A4DRGBLK.CDR 3.81 (0.15) Min All remaining pins = Gnd.