FUJITSU MB91F627

FUJITSU MICROELECTRONICS
DATA SHEET
DS07-16908-1E
32-bit Microcontrollers
CMOS
FR80 MB91625 Series
MB91F627/V650
■ DESCRIPTION
The MB91625 series is a line of FUJITSU MICROELECTRONICS microcontrollers based on a 32-bit RISC CPU
core that feature a variety of peripheral functions for embedded applications that demand high-performance and
high-speed CPU processing.
This series is based on the FR80* family CPU and is implemented as a single chip.
* : FR, the abbreviation of FUJITSU RISC controller, is a line of products of Fujitsu Microelectronics Limited.
■ FEATURES
• FR80 CPU
• 32-bit RISC, load/store architecture, five-stage pipeline
• General-purpose registers : 32-bit × 16
• 16-bit fixed-length instructions (basic instructions) : 1 instruction per cycle
• Instructions suitable for embedded applications
- Memory-to-memory transfer, bit processing, barrel shift instructions, etc.
- Instruction support for high level languages
Function entry and exit instructions, instructions for register multi-load and multi-store
- Bit search instruction
“1” detection, “0” detection, transition point detection
- Branch instructions with delay slots
Reduced overhead when processing branches
- Register interlock functions
Facilitate coding in assembly language
- Built-in multiplier/instruction-level support
- Signed 32-bit multiplication
: 5 cycles
- Signed 16-bit multiplication
: 3 cycles
- Interrupts (save PC and PS) : 6 cycles, 16 priority levels
(Continued)
For the information for microcontroller supports, see the following web site.
This web site includes the "Customer Design Review Supplement" which provides the latest cautions on
system development and the minimal requirements to be checked to prevent problems before the system
development.
http://edevice.fujitsu.com/micom/en-support/
Copyright©2009 FUJITSU MICROELECTRONICS LIMITED All rights reserved
2009.9
MB91625 Series
- Harvard architecture allowing program access and data access to be executed simultaneously
- Instruction prefetch function has been added with 4 word instruction queue of CPU
• Instruction compatible with FR family CPU
- Additional bit search instructions
- No resource instructions and coprocessor instructions
• Maximum operating frequency
• CPU : 60 MHz
• Resources : 40 MHz
• DMA controller (DMAC)
• 8 channels
• Address space : 32 bits (4 Gbytes)
• Transfer modes : Block transfer/burst transfer/demand transfer
• Address update : Increment/decrement/fixed (increment/decrement step size of 1, 2, or 4)
• Transfer data length : Selectable from 8-bit, 16-bit, 32-bit
• Block size : 1 to 16
• Number of transfers : 1 to 65535
• Transfer requests
- Requests from software
- Interrupt requests from peripheral resources (interrupt requests are shared, including external interrupts)
• Reload functions : Reload can be specified on all channels
• Priority order : Fixed (ch.0 > ch.1 > ch.2 > ch.3 > ...) or round-robin
• Interrupt requests : Interrupts can be generated for transfer complete, transfer error, and transfer interrupted.
• Multifunction serial interface
• 4 channels with 16-byte FIFO, 8 channels without FIFO
• Operation mode is selectable from the followings for each channel (For ch.0, I2C is not available.)
• UART
- Full-duplex double buffer
- Selectable parity on/off
- Built-in dedicated baud rate generator
- External clock can be used as a serial clock
- Error detection function for parity, frame and overrun errors
• CSIO
- Full-duplex double buffer
- Built-in dedicated baud rate generator
- Overrun error detection function
• I2C
- Supports both standard mode (Max 100 kbps)and Fast mode (Max 400 kbps)
- Some channels are 5 V tolerant
• Interrupts
• Total of 32 external interrupts (some pins are 5 V tolerant)
• Interrupts from peripheral resources
• Programmable interrupt levels (16 levels)
• Can be used to return from stop mode, sleep mode
(Continued)
2
DS07-16908-1E
MB91625 Series
• A/D converter
• 16 channels, 1 unit
• 10-bit resolution
• Conversion time : approx. 1.2 μs (PCLK = 33 MHz)
• Priority conversion (2 levels)
• Conversion modes : Single-shot conversion mode, scan conversion mode
• Activation sources : Software, external trigger, base timer
• Built-in FIFO for storing conversion data (for scan conversion:16, for priority conversion:4)
• D/A converter
• 2 channels
• 8-bit resolution
• Base timer
• 16 channels
• Operation mode is selectable from the followings for each channel
- 16/32-bit reload timer
- 16-bit PWM timer
- 16/32-bit PWC timer
- 16-bit PPG timer
• Cascading connection between 2 channels allows them to be used as one 32-bit timer
• Multiple channels can be started simultaneously
• Input/output select function
• 16-bit reload timer
• 3 channels (including 1 channel for REALOS)
• Interval timer function
• Count clock select function (peripheral clock (PCLK) divided by 2 to 64)
• Compare timer
• 32-bit input capture : 8 channels
• 32-bit output compare : 8 channels
• 32-bit free-run timer : 2 channels
• Other interval timers
• Up/down counter : 4 channels
• Watch counter : 1 channel
• Watchdog timer : 1 channel
• Main timer
• 1 channel
• Counts the oscillation stabilization wait time of the main clock (MCLK)
• Counts the oscillation stabilization wait time of the PLL clock (PLLCLK)
• Can be used as an interval timer while the main clock (MCLK) oscillations is stable
• Sub timer
• 1 channel
• Counts the oscillation stabilization wait time of the sub clock (SBCLK)
• Can be used as an interval timer while the sub clock (SBCLK) oscillations is stable
(Continued)
DS07-16908-1E
3
MB91625 Series
(Continued)
• Clock generation
• Main clock (MCLK) oscillator
• Sub clock (SBCLK) oscillator
• PLL clock (PLLCLK) oscillator
• Low-power dissipation mode
• Stop mode
• Watch mode
• Sleep mode
• Doze mode
• Clock division function
• Other features
• I/O port
• INIT pin is provided as a reset pin
• Watchdog timer reset, software reset
• Delay interrupt
• Power supply : Single power supply (2.7 V to 3.6 V)
4
DS07-16908-1E
MB91625 Series
■ PRODUCT LINEUP
Product Name
MB91V650
MB91F627
Evaluation products
Flash memory products
⎯
(Supports by emulation memory)
512 K bytes
Built-in RAM capacity
128 K bytes
48 K bytes
External bus interface
Supported
Not supported
Items
Product type
Built-in program memory size
DMA controller (DMAC)
8 channels
Base timer
16 channels
Multifunction serial interface
without FIFO: 8 channels (ch.0 to ch.7)
with FIFO: 4 channels (ch.8 to ch.11)
External interrupt
32 (Some pins support 5V tolerant)
10-bit A/D converter
32 channels, 2 units
16 channels, 1 unit
8-bit D/A converter
3 channels
2 channels
16-bit reload timer
3 channels
32-bit input capture
8 channels
32-bit output compare
8 channels
32-bit free-run timer
2 channels
Up/down counter
4 channels
Watch counter
1 channel
I/O port
154
86
Main timer
1 channel
Sub timer
1 channel
Wild register
16 channels
Debug function
⎯
DSU4
■ PACKAGES
Product name
Package
MB91F627
FPT-100P-M20
: Supported
Note: Refer to “■ PACKAGE DIMENSION” for detailed information on each package.
DS07-16908-1E
5
MB91625 Series
■ PIN ASSIGNMENT
100
99
98
97
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78
77
76
VCC
P26/TIOA11/SCK5/ZIN3/OUT2
P25/TIOB10/SIN5/BIN3/OUT1
P24/TIOA10/SOUT5/AIN3/OUT0
P23/TIOB9
P22/TIOA9/SCK4/ZIN2
P21/TIOB8/SIN4/BIN2
P20/TIOA8/SOUT4/AIN2
P17/TIOB7/INT7
P16/TIOA7/SCK3/ZIN1/INT6
P15/TIOB6/SIN3/BIN1/INT5
P14/TIOA6/SOUT3/AIN1/INT4
P13/TIOB5/INT3
P12/TIOA5/SCK2/ZIN0/INT2
P11/TIOB4/SIN2/BIN0/INT1
P10/TIOA4/SOUT2/AIN0/INT0
P07/TIOB3/IN7
P06/TIOA3/SCK1/IN6
P05/TIOB2/SIN1/IN5
P04/TIOA2/SOUT1/IN4
P03/TIOB1/IN3
P02/TIOA1/SCK0_1/IN2
P01/TIOB0/SIN0_1/IN1
P00/TIOA0/SOUT0_1/IN0
P67/INT23_2
(TOP VIEW)
VSS
C
P27/TIOB11/OUT3
P30/TIOA12/SOUT6/INT8
P31/TIOB12/SIN6/INT9
P32/TIOA13/SCK6/INT10
P33/TIOB13/INT11
P34/TIOA14/SOUT7/OUT4/INT12
P35/TIOB14/SIN7/OUT5/INT13
P36/TIOA15/SCK7/OUT6/INT14
P37/TIOB15/OUT7/INT15
P40/SOUT8
P41/SIN8
P42/SCK8
P43
P44/SOUT9
P45/SIN9
P46/SCK9
P47
INIT
MD0
MD1
X0
X1
VSS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
LQFP-100
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
P66/ZIN3_1/FRCK0_1
P65/BIN3_1/ADTRG0_1
P64/AIN3_1
P63/FRCK1_1/INT22_2
P62/ZIN2_1
P61/BIN2_1
P60/AIN2_1
P57
P56/SCK11/ZIN1_1/FRCK0
P55/SIN11/BIN1_1/ADTRG0
P54/SOUT11/AIN1_1
P53/FRCK1/INT21_2
P52/SCK10/ZIN0_1
P51/SIN10/BIN0_1
P50/SOUT10/AIN0_1
PA7/TMI2_1/INT23_1
PA6/TMI1_1/INT22_1
PA5/TMI0_1/INT21_1
PA4/TMO2_1/INT20_1
PA3/TMO1_1/INT19_1
PA2/TMO0_1/INT18_1
PA1/INT17_1
PA0/INT16_1
P92
VCC
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
VSS
P91/DA1
P90/DA0
AVSS
AVRH
AVCC
P87/AN15/IN7_1/INT31
P86/AN14/IN6_1/INT30
P85/AN13/IN5_1/INT29
P84/AN12/IN4_1/INT28
P83/AN11/IN3_1/INT27
P82/AN10/IN2_1/INT26
P81/AN9/IN1_1/INT25
P80/AN8/IN0_1/INT24
P77/AN7/SCK0/TMI2/OUT7_1/INT23
P76/AN6/SIN0/TMI1/OUT6_1/INT22
P75/AN5/SOUT0/TMI0/OUT5_1/INT21
P74/AN4/TMO2/OUT4_1/INT20
P73/AN3/TMO1/OUT3_1/INT19
P72/AN2/TMO0/OUT2_1/INT18
P71/AN1/OUT1_1/INT17
P70/AN0/OUT0_1/INT16
PK2/ADTRG0_2
PK1/X0A
PK0/X1A
(FPT-100P-M20)
Note: The number after the underscore (“_”) in pin names such as XXX_1 and XXX_2 indicates the port number.
For these pins, there are multiple pins that provide the same function for the same channel. Use the
extended port function register (EPFR) to select the pin.
6
DS07-16908-1E
MB91625 Series
■ PIN DESCRIPTION
The number after the underscore (“_”) in pin names such as XXX_1 and XXX_2 indicates the port number.
For these pins, there are multiple pins that provide the same function for the same channel. Use the extended
port function register (EPFR) to select the pin.
CMOS
Pin no.
I/O
CMOS
level
Function
level
Pin name circuit
hysteresis
LQFP-100
input
type*1
input
1
VSS
⎯
GND pin
⎯
⎯
2
C
⎯
Power stabilization capacity pin
⎯
⎯
General-purpose I/O port
⎯
Base timer ch.11 TIOB pin
⎯
32-bit output compare ch.3 output pin
⎯
General-purpose I/O port
⎯
Base timer ch.12 TIOA pin
⎯
Multifunction serial interface ch.6 output pin.
This pin operates as SOUT6 when it is used in a
UART/CSIO (operation modes 0 to 2) and as SDA6
when it is used in an I2C (operation mode 4).
⎯
INT8
External interrupt request 8 input pin
⎯
P31
General-purpose I/O port
⎯
Base timer ch.12 TIOB pin
⎯
Multifunction serial interface ch.6 input pin
⎯
INT9
External interrupt request 9 input pin
⎯
P32
General-purpose I/O port
⎯
Base timer ch.13 TIOA pin
⎯
Multifunction serial interface ch.6 clock I/O pin.
This pin operates as SCK6 when it is used in a UART/
CSIO (operation modes 0 to 2) and as SCL6 when it is
used in an I2C (operation mode 4).
⎯
External interrupt request 10 input pin
⎯
General-purpose I/O port
⎯
Base timer ch.13 TIOB pin
⎯
External interrupt request 11 input pin
⎯
P27
3
TIOB11
D*2
OUT3
P30
TIOA12
4
5
SOUT6
(SDA6)
TIOB12
SIN6
D*2
D*2
TIOA13
6
SCK6
(SCL6)
D*2
INT10
P33
7
TIOB13
INT11
D*
2
⎯
⎯
(Continued)
DS07-16908-1E
7
MB91625 Series
Pin no.
LQFP-100
Pin name
I/O
circuit
type*1
General-purpose I/O port
⎯
Base timer ch.14 TIOA pin
⎯
Multifunction serial interface ch.7 output pin.
This pin operates as SOUT7 when it is used in a
UART/CSIO (operation modes 0 to 2) and as SDA7
when it is used in an I2C (operation mode 4).
⎯
OUT4
32-bit output compare ch.4 output pin
⎯
INT12
External interrupt request 12 input pin
⎯
General-purpose I/O port
⎯
Base timer ch.14 TIOB pin
⎯
Multifunction serial interface ch.7 input pin
⎯
OUT5
32-bit output compare ch.5 output pin
⎯
INT13
External interrupt request 13 input pin
⎯
General-purpose I/O port
⎯
TIOA15
Base timer ch.15 TIOA pin
⎯
SCK7
(SCL7)
Multifunction serial interface ch.7 clock I/O pin.
This pin operates as SCK7 when it is used in a UART/
CSIO (operation modes 0 to 2) and as SCL7 when it is
used in an I2C (operation mode 4).
⎯
OUT6
32-bit output compare ch.6 output pin
⎯
INT14
External interrupt request 14 input pin
⎯
General-purpose I/O port
⎯
Base timer ch.15 TIOB pin
⎯
32-bit output compare ch.7 output pin
⎯
External interrupt request 15 input pin
⎯
General-purpose I/O port
⎯
Multifunction serial interface ch.8 output pin.
This pin operates as SOUT8 when it is used in a
UART/CSIO (operation modes 0 to 2) and as SDA8
when it is used in an I2C (operation mode 4).
⎯
P34
TIOA14
8
SOUT7
(SDA7)
D*
2
P35
TIOB14
9
SIN7
D*
2
P36
10
D*2
P37
11
TIOB15
OUT7
D*2
INT15
P40
12
Function
CMOS
level
input
SOUT8
(SDA8)
D*2
CMOS
level
hysteresis
input
⎯
⎯
⎯
⎯
⎯
(Continued)
8
DS07-16908-1E
MB91625 Series
Pin no.
LQFP-100
13
Pin name
P41
SIN8
I/O
circuit
type*1
D*2
P42
14
SCK8
(SCL8)
D*2
15
P43
D*2
P44
16
17
SOUT9
(SDA9)
P45
SIN9
D*2
D*2
P46
Function
CMOS
level
input
General-purpose I/O port
⎯
Multifunction serial interface ch.8 input pin
⎯
General-purpose I/O port
⎯
Multifunction serial interface ch.8 clock I/O pin.
This pin operates as SCK8 when it is used in a UART/
CSIO (operation modes 0 to 2) and as SCL8 when it is
used in an I2C (operation mode 4).
⎯
General-purpose I/O port
⎯
General-purpose I/O port
⎯
Multifunction serial interface ch.9 output pin.
This pin operates as SOUT9 when it is used in a
UART/CSIO (operation modes 0 to 2) and as SDA9
when it is used in an I2C (operation mode 4).
⎯
General-purpose I/O port
⎯
Multifunction serial interface ch.9 input pin
⎯
General-purpose I/O port
⎯
Multifunction serial interface ch.9 clock I/O pin.
This pin operates as SCK9 when it is used in a UART/
CSIO (operation modes 0 to 2) and as SCL9 when it is
used in an I2C (operation mode 4).
⎯
General-purpose I/O port
⎯
18
SCK9
(SCL9)
D*2
19
P47
D*2
20
INIT
P
External reset input pin. A reset is valid when INIT = L.
The I/O circuit type for the Flash memory products is
P.
⎯
⎯
CMOS
level
hysteresis
input
21
MD0
P
Mode 0 pin.
The I/O circuit type for the Flash memory products is
P.
During normal operation, MD0 = L must be input. During serial programming to Flash memory, MD0 = H
must be input.
22
MD1
P
Mode 1 pin. Input must always be at the "L" level.
The I/O circuit type for the Flash memory products is
P.
⎯
23
X0
A
Main clock (oscillation) input pin
⎯
24
X1
A
Main clock (oscillation) I/O pin
⎯
⎯
25
VSS
⎯
GND pin
⎯
⎯
(Continued)
DS07-16908-1E
9
MB91625 Series
Pin no.
LQFP-100
26
27
28
Pin name
I/O
circuit
type*1
General-purpose I/O port
⎯
Sub clock (oscillation) I/O pin
⎯
General-purpose I/O port
⎯
Sub clock (oscillation) input pin
⎯
General-purpose I/O port
⎯
10-bit A/D converter external trigger input pin (Port 2)
⎯
General-purpose I/O port
⎯
10-bit A/D converter ch.0 analog input pin
⎯
⎯
32-bit output compare ch.0 output pin (Port 1)
⎯
⎯
External interrupt request 16 input pin
⎯
General-purpose I/O port
⎯
10-bit A/D converter ch.1 analog input pin
⎯
⎯
32-bit output compare ch.1 output pin (Port 1)
⎯
⎯
External interrupt request 17 input pin
⎯
P72
General-purpose I/O port
⎯
AN2
10-bit A/D converter ch.2 analog input pin
⎯
⎯
16-bit reload timer ch.0 output pin
⎯
⎯
32-bit output compare ch.2 output pin (Port 1)
⎯
⎯
External interrupt request 18 input pin
⎯
P73
General-purpose I/O port
⎯
AN3
10-bit A/D converter ch.3 analog input pin
⎯
⎯
16-bit reload timer ch.1 output pin
⎯
⎯
32-bit output compare ch.3 output pin (Port 1)
⎯
⎯
External interrupt request 19 input pin
⎯
P74
General-purpose I/O port
⎯
AN4
10-bit A/D converter ch.4 analog input pin
⎯
⎯
16-bit reload timer ch.2 output pin
⎯
⎯
32-bit output compare ch.4 output pin (Port 1)
⎯
⎯
External interrupt request 20 input pin
⎯
PK0
X1A
PK1
X0A
PK2
ADTRG0_2
I
I
C
P70
29
AN0
OUT0_1
E
INT16
P71
30
AN1
OUT1_1
E
INT17
31
TMO0
E
OUT2_1
INT18
32
TMO1
E
OUT3_1
INT19
33
Function
CMOS
CMOS
level
level
hysteresis
input
input
TMO2
OUT4_1
INT20
E
⎯
(Continued)
10
DS07-16908-1E
MB91625 Series
Pin no.
LQFP-100
34
Pin name
I/O
circuit
type*1
General-purpose I/O port
⎯
AN5
10-bit A/D converter ch.5 analog input pin
⎯
⎯
Multifunction serial interface ch.0 output pin.
This pin operates as SOUT0 when it is used in a
UART/CSIO (operation modes 0 to 2).
⎯
⎯
16-bit reload timer ch.0 input pin
⎯
32-bit output compare ch.5 output pin (Port 1)
⎯
External interrupt request 21 input pin
⎯
P76
General-purpose I/O port
⎯
AN6
10-bit A/D converter ch.6 analog input pin
⎯
Multifunction serial interface ch.0 input pin
⎯
16-bit reload timer ch.1 input pin
⎯
32-bit output compare ch.6 output pin (Port 1)
⎯
External interrupt request 22 input pin
⎯
P77
General-purpose I/O port
⎯
AN7
10-bit A/D converter ch.7 analog input pin
⎯
Multifunction serial interface ch.0 clock I/O pin.
This pin operates as SCK0 when it is used in a UART/
CSIO (operation modes 0 to 2).
⎯
16-bit reload timer ch.2 input pin
⎯
32-bit output compare ch.7 output pin (Port 1)
⎯
External interrupt request 23 input pin
⎯
General-purpose I/O port
⎯
10-bit A/D converter ch.8 analog input pin
⎯
32-bit input capture ch.0 input pin (Port 1)
⎯
External interrupt request 24 input pin
⎯
SOUT0
E
OUT5_1
INT21
SIN0
TMI1
E
OUT6_1
INT22
36
SCK0
E
TMI2
OUT7_1
INT23
P80
37
CMOS
level
hysteresis
input
P75
TMI0
35
Function
CMOS
level
input
AN8
IN0_1
INT24
E
⎯
⎯
⎯
⎯
⎯
⎯
(Continued)
DS07-16908-1E
11
MB91625 Series
Pin no.
LQFP-100
Pin name
I/O
circuit
type*1
P81
38
AN9
IN1_1
E
INT25
P82
39
AN10
IN2_1
E
INT26
P83
40
AN11
IN3_1
E
INT27
P84
41
AN12
IN4_1
E
INT28
P85
42
AN13
IN5_1
E
INT29
P86
43
AN14
IN6_1
E
INT30
P87
44
AN15
IN7_1
E
INT31
Function
CMOS
level
input
General-purpose I/O port
⎯
10-bit A/D converter ch.9 analog input pin
⎯
32-bit input capture ch.1 input pin (Port 1)
⎯
External interrupt request 25 input pin
⎯
General-purpose I/O port
⎯
10-bit A/D converter ch.10 analog input pin
⎯
32-bit input capture ch.2 input pin (Port 1)
⎯
External interrupt request 26 input pin
⎯
General-purpose I/O port
⎯
10-bit A/D converter ch.11 analog input pin
⎯
32-bit input capture ch.3 input pin (Port 1)
⎯
External interrupt request 27 input pin
⎯
General-purpose I/O port
⎯
10-bit A/D converter ch.12 analog input pin
⎯
32-bit input capture ch.4 input pin (Port 1)
⎯
External interrupt request 28 input pin
⎯
General-purpose I/O port
⎯
10-bit A/D converter ch.13 analog input pin
⎯
32-bit input capture ch.5 input pin (Port 1)
⎯
External interrupt request 29 input pin
⎯
General-purpose I/O port
⎯
10-bit A/D converter ch.14 analog input pin
⎯
32-bit input capture ch.6 input pin (Port 1)
⎯
External interrupt request 30 input pin
⎯
General-purpose I/O port
⎯
10-bit A/D converter ch.15 analog input pin
⎯
32-bit input capture ch.7 input pin (Port 1)
⎯
External interrupt request 31 input pin
⎯
CMOS
level
hysteresis
input
⎯
⎯
⎯
⎯
⎯
⎯
⎯
45
AVCC
⎯
10-bit A/D converter and 8-bit D/A converter analog
power pin
⎯
⎯
46
AVRH
⎯
10-bit A/D converter analog reference voltage input pin
⎯
⎯
47
AVSS
⎯
10-bit A/D converter and 8-bit D/A converter GND pin
⎯
⎯
(Continued)
12
DS07-16908-1E
MB91625 Series
Pin no.
LQFP-100
Pin name
P90
48
DA0
P91
49
DA1
I/O
circuit
type*1
F
F
Function
CMOS
level
input
CMOS
level
hysteresis
input
General-purpose I/O port
⎯
8-bit D/A converter ch.0 analog output pin
⎯
General-purpose I/O port
⎯
8-bit D/A converter ch.1 analog output pin
⎯
⎯
⎯
50
VSS
⎯
GND pin
⎯
⎯
51
VCC
⎯
Power pin
⎯
⎯
52
P92
C
General-purpose I/O port
⎯
General-purpose I/O port
⎯
External interrupt request 16 input pin (Port 1)
⎯
General-purpose I/O port
⎯
External interrupt request 17 input pin (Port 1)
⎯
General-purpose I/O port
⎯
16-bit reload timer ch.0 output pin (Port 1)
⎯
External interrupt request 18 input pin (Port 1)
⎯
General-purpose I/O port
⎯
16-bit reload timer ch.1 output pin (Port 1)
⎯
External interrupt request 19 input pin (Port 1)
⎯
General-purpose I/O port
⎯
16-bit reload timer ch.2 output pin (Port 1)
⎯
External interrupt request 20 input pin (Port 1)
⎯
General-purpose I/O port
⎯
16-bit reload timer ch.0 input pin (Port 1)
⎯
External interrupt request 21 input pin (Port 1)
⎯
General-purpose I/O port
⎯
16-bit reload timer ch.1 input pin (Port 1)
⎯
External interrupt request 22 input pin (Port 1)
⎯
General-purpose I/O port
⎯
16-bit reload timer ch.2 input pin (Port 1)
⎯
External interrupt request 23 input pin (Port 1)
⎯
53
54
PA0
INT16_1
PA1
INT17_1
C
C
PA2
55
TMO0_1
C
INT18_1
PA3
56
TMO1_1
C
INT19_1
PA4
57
TMO2_1
C
INT20_1
PA5
58
TMI0_1
C
INT21_1
PA6
59
TMI1_1
C
INT22_1
PA7
60
TMI2_1
INT23_1
C
⎯
⎯
⎯
(Continued)
DS07-16908-1E
13
MB91625 Series
Pin no.
LQFP-100
Pin name
I/O
circuit
type*1
P50
61
SOUT10
(SDA10)
C
AIN0_1
P51
62
SIN10
C
BIN0_1
P52
63
SCK10
(SCL10)
C
ZIN0_1
P53
64
FRCK1
C
INT21_2
P54
65
SOUT11
(SDA11)
C
AIN1_1
P55
66
SIN11
BIN1_1
ADTRG0
C
Function
CMOS
level
input
General-purpose I/O port
⎯
Multifunction serial interface ch.10 output pin.
This pin operates as SOUT10 when it is used in a
UART/CSIO (operation modes 0 to 2) and as SDA10
when it is used in an I2C (operation mode 4).
⎯
Up/Down counter ch.0 AIN input pin (Port 1)
⎯
General-purpose I/O port
⎯
Multifunction serial interface ch.10 input pin
⎯
Up/Down counter ch.0 BIN input pin (Port 1)
⎯
General-purpose I/O port
⎯
Multifunction serial interface ch.10 clock I/O pin.
This pin operates as SCK10 when it is used in a UART/
CSIO (operation modes 0 to 2) and as SCL10 when it
is used in an I2C (operation mode 4).
⎯
Up/Down counter ch.0 ZIN input pin (Port 1)
⎯
General-purpose I/O port
⎯
32-bit free-run timer ch.1 external clock input pin
⎯
External interrupt request 21 input pin (Port 2)
⎯
General-purpose I/O port
⎯
Multifunction serial interface ch.11 output pin.
This pin operates as SOUT11 when it is used in a
UART/CSIO (operation modes 0 to 2) and as SDA11
when it is used in an I2C (operation mode 4).
⎯
Up/Down counter ch.1 AIN input pin (Port 1)
⎯
General-purpose I/O port
⎯
Multifunction serial interface ch.11 input pin
⎯
Up/Down counter ch.1 BIN input pin (Port 1)
⎯
10-bit A/D converter external trigger input pin
⎯
CMOS
level
hysteresis
input
(Continued)
14
DS07-16908-1E
MB91625 Series
Pin no.
LQFP-100
Pin name
I/O
circuit
type*1
General-purpose I/O port
⎯
Multifunction serial interface ch.11 clock I/O pin.
This pin operates as SCK11 when it is used in a UART/
CSIO (operation modes 0 to 2) and as SCL11 when it
is used in an I2C (operation mode 4).
⎯
ZIN1_1
Up/Down counter ch.1 ZIN input pin (Port 1)
⎯
FRCK0
32-bit free-run timer ch.0 external clock input pin
⎯
General-purpose I/O port
⎯
General-purpose I/O port
⎯
Up/Down counter ch.2 AIN input pin (Port 1)
⎯
General-purpose I/O port
⎯
Up/Down counter ch.2 BIN input pin (Port 1)
⎯
General-purpose I/O port
⎯
Up/Down counter ch.2 ZIN input pin (Port 1)
⎯
General-purpose I/O port
⎯
32-bit free-run timer ch.1 external clock input pin (Port
1)
⎯
External interrupt request 22 input pin (Port 2)
⎯
General-purpose I/O port
⎯
Up/Down counter ch.3 AIN input pin (Port 1)
⎯
General-purpose I/O port
⎯
Up/Down counter ch.3 BIN input pin (Port 1)
⎯
10-bit A/D converter external trigger input pin (Port 1)
⎯
General-purpose I/O port
⎯
Up/Down counter ch.3 ZIN input pin (Port 1)
⎯
32-bit free-run timer ch.0 external clock input pin
(Port 1)
⎯
General-purpose I/O port
⎯
External interrupt request 23 input pin (Port 2)
⎯
P56
67
SCK11
(SCL11)
68
69
70
71
P57
P60
AIN2_1
P61
BIN2_1
P62
ZIN2_1
C
C
C
C
C
P63
72
FRCK1_1
C
INT22_2
73
P64
AIN3_1
C
P65
74
BIN3_1
C
ADTRG0_
1
P66
75
ZIN3_1
C
FRCK0_1
76
Function
CMOS
level
input
P67
INT23_2
C
CMOS
level
hysteresis
input
(Continued)
DS07-16908-1E
15
MB91625 Series
Pin no.
LQFP-100
77
78
79
80
81
82
Pin name
I/O
circuit
type*1
Function
CMOS
level
input
CMOS
level
hysteresis
input
P00
General-purpose I/O port
⎯
TIOA0
Base timer ch.0 TIOA pin
⎯
⎯
Multifunction serial interface ch.0 output pin (Port 1).
This pin operates as SOUT0_1 when it is used in a
UART/CSIO (operation modes 0 to 2).
⎯
⎯
IN0
32-bit input capture ch.0 input pin
⎯
P01
General-purpose I/O port
⎯
Base timer ch.0 TIOB pin
⎯
Multifunction serial interface ch.0 input pin (Port 1)
⎯
IN1
32-bit input capture ch.1 input pin
⎯
P02
General-purpose I/O port
⎯
TIOA1
Base timer ch.1 TIOA pin
⎯
Multifunction serial interface ch.0 clock I/O pin (Port 1).
This pin operates as SCK0_1 when it is used in a
UART/CSIO (operation modes 0 to 2).
⎯
IN2
32-bit input capture ch.2 input pin
⎯
P03
General-purpose I/O port
⎯
Base timer ch.1 TIOB pin
⎯
IN3
32-bit input capture ch.3 input pin
⎯
P04
General-purpose I/O port
⎯
TIOA2
Base timer ch.2 TIOA pin
⎯
Multifunction serial interface ch.1 output pin.
This pin operates as SOUT1 when the product is used
in a UART/CSIO (operation modes 0 to 2) and as
SDA1 when it is used in an I2C (operation mode 4).
⎯
IN4
32-bit input capture ch.4 input pin
⎯
P05
General-purpose I/O port
⎯
Base timer ch.2 TIOB pin
⎯
Multifunction serial interface ch.1 input pin
⎯
32-bit input capture ch.5 input pin
⎯
SOUT0_1
TIOB0
SIN0_1
SCK0_1
TIOB1
SOUT1
(SDA1)
TIOB2
SIN1
IN5
C
C
C
C
C
C
⎯
(Continued)
16
DS07-16908-1E
MB91625 Series
Pin no.
LQFP-100
83
84
85
86
87
88
Pin name
I/O
circuit
type*1
Function
CMOS
level
input
P06
General-purpose I/O port
⎯
TIOA3
Base timer ch.3 TIOA pin
⎯
Multifunction serial interface ch.1 clock I/O pin.
This pin operates as SCK1 when it is used in a UART/
CSIO (operation modes 0 to 2) and as SCL1 when it is
used in an I2C (operation mode 4).
⎯
IN6
32-bit input capture ch.6 input pin
⎯
P07
General-purpose I/O port
⎯
Base timer ch.3 TIOB pin
⎯
IN7
32-bit input capture ch.7 input pin
⎯
P10
General-purpose I/O port
⎯
TIOA4
Base timer ch.4 TIOA pin
⎯
SOUT2
(SDA2)
Multifunction serial interface ch.2 output pin.
This pin operates as SOUT2 when it is used in a
UART/CSIO (operation modes 0 to 2) and as SDA2
when it is used in an I2C (operation mode 4).
⎯
AIN0
Up/Down counter ch.0 AIN input pin
⎯
INT0
External interrupt request 0 input pin
⎯
P11
General-purpose I/O port
⎯
TIOB4
Base timer ch.4 TIOB pin
⎯
Multifunction serial interface ch.2 input pin
⎯
BIN0
Up/Down counter ch.0 BIN input pin
⎯
INT1
External interrupt request 1 input pin
⎯
P12
General-purpose I/O port
⎯
TIOA5
Base timer ch.5 TIOA pin
⎯
SCK2
(SCL2)
Multifunction serial interface ch.2 clock I/O pin.
This pin operates as SCK2 when it is used in a UART/
CSIO (operation modes 0 to 2) and as SCL2 when it is
used in an I2C (operation mode 4).
⎯
ZIN0
Up/Down counter ch.0 ZIN input pin
⎯
INT2
External interrupt request 2 input pin
⎯
P13
General-purpose I/O port
⎯
Base timer ch.5 TIOB pin
⎯
External interrupt request 3 input pin
⎯
SCK1
(SCL1)
TIOB3
SIN2
TIOB5
INT3
C
C
C
C
C
C
CMOS
level
hysteresis
input
⎯
(Continued)
DS07-16908-1E
17
MB91625 Series
Pin no.
LQFP-100
89
90
91
92
93
94
Pin name
I/O
circuit
type*1
Function
CMOS
level
input
P14
General-purpose I/O port
⎯
TIOA6
Base timer ch.6 TIOA pin
⎯
SOUT3
(SDA3)
Multifunction serial interface ch.3 output pin.
This pin operates as SOUT3 when the product is used
in a UART/CSIO (operation modes 0 to 2) and as
SDA3 when it is used in an I2C (operation mode 4).
⎯
AIN1
Up/Down counter ch.1 AIN input pin
⎯
INT4
External interrupt request 4 input pin
⎯
P15
General-purpose I/O port
⎯
TIOB6
Base timer ch.6 TIOB pin
⎯
Multifunction serial interface ch.3 input pin
⎯
BIN1
Up/Down counter ch.1 BIN input pin
⎯
INT5
External interrupt request 5 input pin
⎯
P16
General-purpose I/O port
⎯
TIOA7
Base timer ch.7 TIOA pin
⎯
SCK3
(SCL3)
Multifunction serial interface ch.3 clock I/O pin.
This pin operates as SCK3 when it is used in a UART/
CSIO (operation modes 0 to 2) and as SCL3 when it is
used in an I2C (operation mode 4).
⎯
ZIN1
Up/Down counter ch.1 ZIN input pin
⎯
INT6
External interrupt request 6 input pin
⎯
P17
General-purpose I/O port
⎯
Base timer ch.7 TIOB pin
⎯
INT7
External interrupt request 7 input pin
⎯
P20
General-purpose I/O port
⎯
TIOA8
Base timer ch.8 TIOA pin
⎯
Multifunction serial interface ch.4 output pin.
This pin operates as SOUT4 when it is used in a
UART/CSIO (operation modes 0 to 2) and as SDA4
when it is used in an I2C (operation mode 4).
⎯
AIN2
Up/Down counter ch.2 AIN input pin
⎯
P21
General-purpose I/O port
⎯
Base timer ch.8 TIOB pin
⎯
Multifunction serial interface ch.4 input pin
⎯
Up/Down counter ch.2 BIN input pin
⎯
SIN3
TIOB7
SOUT4
(SDA4)
TIOB8
SIN4
BIN2
C
C
C
C
D*2
D*2
CMOS
level
hysteresis
input
⎯
⎯
(Continued)
18
DS07-16908-1E
MB91625 Series
(Continued)
Pin no.
LQFP-100
95
Pin name
I/O
circuit
type*1
General-purpose I/O port
⎯
TIOA9
Base timer ch.9 TIOA pin
⎯
Multifunction serial interface ch.4 clock I/O pin.
This pin operates as SCK4 when it is used in a UART/
CSIO (operation modes 0 to 2) and as SCL4 when it is
used in an I2C (operation mode 4).
⎯
Up/Down counter ch.2 ZIN input pin
⎯
General-purpose I/O port
⎯
Base timer ch.9 TIOB pin
⎯
General-purpose I/O port
⎯
TIOA10
Base timer ch.10 TIOA pin
⎯
SOUT5
(SDA5)
Multifunction serial interface ch.5 output pin.
This pin operates as SOUT5 when it is used in a
UART/CSIO (operation modes 0 to 2) and as SDA5
when it is used in an I2C (operation mode 4).
⎯
AIN3
Up/Down counter ch.3 AIN input pin
⎯
OUT0
32-bit output compare ch.0 output pin
⎯
General-purpose I/O port
⎯
Base timer ch.10 TIOB pin
⎯
Multifunction serial interface ch.5 input pin
⎯
BIN3
Up/Down counter ch.3 BIN input pin
⎯
OUT1
32-bit output compare ch.1 output pin
⎯
General-purpose I/O port
⎯
TIOA11
Base timer ch.11 TIOA pin
⎯
SCK5
(SCL5)
Multifunction serial interface ch.5 clock I/O pin.
This pin operates as SCK5 when it is used in a UART/
CSIO (operation modes 0 to 2) and as SCL5 when it is
used in an I2C (operation mode 4).
⎯
ZIN3
Up/Down counter ch.3 ZIN input pin
⎯
OUT2
32-bit output compare ch.2 output pin
⎯
⎯
Power pin
⎯
⎯
SCK4
(SCL4)
D*2
P23
TIOB9
D*2
P24
97
D*2
P25
TIOB10
98
SIN5
D*2
P26
99
CMOS
level
hysteresis
input
P22
ZIN2
96
Function
CMOS
level
input
100
VCC
D*2
⎯
⎯
⎯
⎯
*1: Refer to “■ I/O CIRCUIT TYPE” for details on the I/O circuit types.
*2: 5 V tolerant pin
DS07-16908-1E
19
MB91625 Series
■ I/O CIRCUIT TYPE
Type
Circuit
Remarks
A
X1
Clock input
• Oscillation feedback resistance
approx. 1 MΩ
• With standby control
X0
Standby control
C
•
•
•
•
P-ch
P-ch
Digital output
N-ch
Digital output
CMOS level output
CMOS level hysteresis input
With pull-up control
With standby control
Note: When this pin is used as an I2C pin, the
digital output P-ch transistor is always
off.
R
Pull-up control
Digital input
Standby
control
(Continued)
20
DS07-16908-1E
MB91625 Series
Type
Circuit
Remarks
D
P-ch
Digital output
•
•
•
•
CMOS level output
CMOS level hysteresis input
5 V tolerant input
With standby control
Note: When this pin is used as an I2C pin,
the digital output P-ch transistor is
always off.
N-ch
Digital output
R
Digital input
Standby
control
E
P-ch
R
P-ch
Digital output
N-ch
Digital output
•
•
•
•
•
•
CMOS level output
CMOS level hysteresis input
With input control
Analog input
With pull-up control
With standby control
Pull-up control
Digital input
Standby control
Analog input
Input control
(Continued)
DS07-16908-1E
21
MB91625 Series
Type
Circuit
Remarks
F
P-ch
P-ch
Digital output
N-ch
Digital output
R
•
•
•
•
•
•
CMOS level output
CMOS level hysteresis input
With input control
Analog output
With pull-up control
With standby control
Pull-up control
Digital input
Standby control
Analog output
Output control
I
X1A
P-ch
Digital output
N-ch
Digital output
• Oscillation feedback resistance
approx.10 MΩ
• CMOS level output
• CMOS level hysteresis input
• With standby control
R
Digital input
Standby
control
Clock input
Standby control
Digital input
R
X0A
P-ch
N-ch
Standby
control
Digital output
Digital output
(Continued)
22
DS07-16908-1E
MB91625 Series
(Continued)
Type
Circuit
Remarks
P
• Flash memory product only
• CMOS level hysteresis input
• High voltage control for testing Flash
memory
N-ch
N-ch
Control pin
N-ch
N-ch
DS07-16908-1E
N-ch
Mode input
R
23
MB91625 Series
■ PRECAUTIONS FOR HANDLING THE DEVICES
Any semiconductor devices have inherently a certain rate of failure. The possibility of failure is greatly affected
by the conditions in which they are used (circuit conditions, environmental conditions, etc.). This page describes
precautions that must be observed to minimize the chance of failure and to obtain higher reliability from your
FUJITSU MICROELECTRONICS semiconductor devices.
1. Precautions for Product Design
This section describes precautions when designing electronic equipment using semiconductor devices.
• Absolute Maximum Ratings
Semiconductor devices can be permanently damaged by application of stress (voltage, current, temperature,
etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
• Recommended Operating Conditions
The recommended operating conditions are required in order to ensure the normal operation of the semiconductor device. All of the device’s electrical characteristics are warranted when the device is operated within these
ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation outside
these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on the data
sheet. Users considering application outside the listed conditions are advised to contact their representatives
beforehand.
• Processing and Protection of Pins
These precautions must be followed when handling the pins which connect semiconductor devices to power
supply and input/output functions.
(1) Preventing Over-Voltage and Over-Current Conditions
Exposure to voltage or current levels in excess of maximum ratings at any pin is likely to cause deterioration
within the device, and in extreme cases leads to permanent damage of the device. Try to prevent such
overvoltage or over-current conditions at the design stage.
(2) Protection of Output Pins
Shorting of output pins to supply pins or other output pins, or connection to large capacitance can cause
large current flows. Such conditions if present for extended periods of time can damage the device.
Therefore, avoid this type of connection.
(3) Handling of Unused Input Pins
Unconnected input pins with very high impedance levels can adversely affect stability of operation. Such
pins should be connected through an appropriate resistance to a power supply pin or ground pin.
24
DS07-16908-1E
MB91625 Series
• Latch-up
Semiconductor devices are constructed by the formation of P-type and N-type areas on a substrate. When
subjected to abnormally high voltages, internal parasitic PNPN junctions (called thyristor structures) may be
formed, causing large current levels in excess of several hundred mA to flow continuously at the power supply
pin. This condition is called latch-up.
Note: The occurrence of latch-up not only causes loss of reliability in the semiconductor device, but can cause
injury or damage from high heat, smoke or flame. To prevent this from happening, do the following:
(a) Be sure that voltages applied to pins do not exceed the absolute maximum ratings. This should
include attention to abnormal noise, surge levels, etc.
(b) Be sure that abnormal current flows do not occur during the power-on sequence.
• Observance of Safety Regulations and Standards
Most countries in the world have established standards and regulations regarding safety, protection from electromagnetic interference, etc. Customers are requested to observe applicable regulations and standards in the
design of products.
• Fail-Safe Design
Any semiconductor devices have inherently a certain rate of failure. You must protect against injury, damage or
loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions.
• Precautions Related to Usage of Devices
FUJITSU MICROELECTRONICS semiconductor devices are intended for use in standard applications (computers, office automation and other office equipment, industrial, communications, and measurement equipment,
personal or household devices, etc.).
CAUTION: Customers considering the use of our products in special applications where failure or abnormal
operation may directly affect human lives or cause physical injury or property damage, or where extremely high
levels of reliability are demanded (such as aerospace systems, atomic energy controls, sea floor repeaters,
vehicle operating controls, medical devices for life support, etc.) are requested to consult with FUJITSU MICROELECTRONICS sales representatives before such use. The company will not be responsible for damages arising
from such use without prior approval.
DS07-16908-1E
25
MB91625 Series
2. Precautions for Package Mounting
Package mounting may be either lead insertion type or surface mount type. In either case, for heat resistance
during soldering, you should only mount under FUJITSU MICROELECTRONICS's recommended conditions.
For detailed information about mount conditions, contact your sales representative.
• Lead Insertion Type
Mounting of lead insertion type packages onto printed circuit boards may be done by two methods: direct
soldering on the board, or mounting by using a socket.
Direct mounting onto boards normally involves processes for inserting leads into through-holes on the board
and using the flow soldering (wave soldering) method of applying liquid solder.
In this case, the soldering process usually causes leads to be subjected to thermal stress in excess of the
absolute ratings for storage temperature. Mounting processes should conform to recommended mounting conditions.
If socket mounting is used, differences in surface treatment of the socket contacts and IC lead surfaces can lead
to contact deterioration after long periods. For this reason it is recommended that the surface treatment of socket
contacts and IC leads be verified before mounting.
• Surface Mount Type
Surface mount packaging has longer and thinner leads than lead-insertion packaging, and therefore leads are
more easily deformed or bent. The use of packages with higher pin counts and narrower pin pitch results in
increased susceptibility to open connections caused by deformed pins, or shorting due to solder bridges.
You must use appropriate mounting techniques. FUJITSU MICROELECTRONICS recommends the solder reflow
method, and has established a ranking of mounting conditions for each product. Users are advised to mount
packages in accordance with FUJITSU MICROELECTRONICS ranking of recommended conditions.
• Lead-Free Packaging
Note: When ball grid array (BGA) packages with Sn-Ag-Cu balls are mounted using Sn-Pb eutectic soldering,
junction strength may be reduced under some conditions of use.
• Storage of Semiconductor Devices
Because plastic chip packages are formed from plastic resins, exposure to natural environmental conditions will
cause absorption of moisture. During mounting, the application of heat to a package that has absorbed moisture
can cause surfaces to peel, reducing moisture resistance and causing packages to crack. To prevent, do the
following:
(a) Avoid exposure to rapid temperature changes, which cause moisture to condense inside the product. Store
products in locations where temperature changes are slight.
(b) Use dry boxes for product storage. Products should be stored below 70% relative humidity, and at temperatures between + 5 °C and + 30 °C. When you open Dry Package that recommends humidity 40% to 70%
relative humidity.
(c) When necessary, FUJITSU MICROELECTRONICS packages semiconductor devices in highly moistureresistant aluminum laminate bags, with a silica gel desiccant. Devices should be sealed in their aluminum
laminate bags for storage.
(d) Avoid storing packages where they are exposed to corrosive gases or high levels of dust.
26
DS07-16908-1E
MB91625 Series
• Baking
Packages that have absorbed moisture may be de-moisturized by baking (heat drying). Follow the FUJITSU
MICROELECTRONICS recommended conditions for baking.
Condition: + 125 °C / 24 h
• Static Electricity
Because semiconductor devices are particularly susceptible to damage by static electricity, you must take the
following precautions:
(a) Maintain relative humidity in the working environment between 40% and 70%. Use of an apparatus for ion
generation may be needed to remove electricity.
(b) Electrically ground all conveyors, solder vessels, soldering irons and peripheral equipment.
(c) Eliminate static body electricity by the use of rings or bracelets connected to ground through high resistance
(on the level of 1 MΩ). Wearing of conductive clothing and shoes, use of conductive floor mats and other
measures to minimize shock loads is recommended.
(d) Ground all fixtures and instruments, or protect with anti-static measures.
(e) Avoid the use of styrofoam or other highly static-prone materials for storage of completed board assemblies.
3. Precautions for Use Environment
Reliability of semiconductor devices depends on ambient temperature and other conditions as described above.
For reliable performance, do the following:
(1) Humidity
Prolonged use in high humidity can lead to leakage in devices as well as printed circuit boards. If high
humidity levels are anticipated, consider anti-humidity processing.
(2) Discharge of Static Electricity
When high-voltage charges exist close to semiconductor devices, discharges can cause abnormal operation.
In such cases, use anti-static measures or processing to prevent discharges.
(3) Corrosive Gases, Dust, or Oil
Exposure to corrosive gases or contact with dust or oil may lead to chemical reactions that will adversely
affect the device. If you use devices in such conditions, consider ways to prevent such exposure or to protect
the devices.
(4) Radiation, Including Cosmic Radiation
Most devices are not designed for environments involving exposure to radiation or cosmic radiation. Users
should provide shielding as appropriate.
(5) Smoke, Flame
Note: Plastic molded devices are flammable, and therefore should not be used near combustible substances.
If devices begin to smoke or burn, there is danger of the release of toxic gases.
Customers considering the use of FUJITSU MICROELECTRONICS products in other special environmental
conditions should consult with sales representatives.
DS07-16908-1E
27
MB91625 Series
■ HANDLING DEVICES
• Power supply pins
In products with multiple VCC and VSS pins, respective pins at the same potential are interconnected within the
device in order to prevent malfunctions such as latch-up. However, all of these pins should be connected externally
to the power supply or ground lines in order to reduce electromagnetic emission levels, to prevent abnormal
operation of strobe signals caused by the rise in the ground level, and to conform to the total output current rating.
Moreover, connect the current supply source with the VCC and VSS pins of this device at low impedance.
It is also advisable that a ceramic capacitor of approximately 0.1 μF be connected as a bypass capacitor between
VCC and VSS pins near this device.
• Crystal oscillator circuit
Noise near the X0 and X1 pins may cause the device to malfunction. Design the printed circuit board so that X0,
X1, the crystal oscillator (or ceramic oscillator), and the bypass capacitor to ground are located as close to the
device as possible.
It is strongly recommended that the PC board artwork be designed such that the X0 and X1 pins are surrounded
by ground plane as this is expected to produce stable operation.
If a 32 kHz oscillator is used (X0A, X1A), use the PK2 pin for an input that changes as infrequently as possible.
Furthermore, take steps such as shown in the following figure to prevent the X0A and PK2 wiring from running
parallel to each other.
If 32 kHz oscillation is not used, there are no limitations.
X0A
GND
PK2
• Using an external clock
When using an external clock, the clock signal should be input to the X0 pin only and the X1 should be kept open.
• Example of Using an External Clock
MB91625 series
X0
Open
28
X1
DS07-16908-1E
MB91625 Series
• C Pin
As MB91625 series includes an internal regulator, always connect a bypass capacitor of approximately 4.7 μF
to the C pin for use by the regulator.
C
MB91625 series
4.7 µF
VSS
GND
• Mode pins (MD0, MD1)
Connect the MD pin (MD0, MD1) directly to VCC or VSS pins. Design the printed circuit board such that the pullup/down resistance stays low, as well as the distance between the mode pins and VCC pins or VSS pins is as
short as possible and the connection impedance is low, when the pins are pulled-up/down such as for switching
the pin level and rewriting the Flash memory data. It is because of preventing the device erroneously switching
to test mode due to noise.
• Notes on power-on
• To ensure that the internal regulator and the oscillator have stabilized immediately after the power is turned
on, keep an “L” level input connected to the INIT pin for the duration of the regulator voltage stabilization wait
time + the oscillator start time of the oscillator + the main oscillator stabilization wait time.
• Turn power on/off in the following order
Turning on : VCC → AVCC → AVRH
Turning off : AVRH → AVCC → VCC
Release the reset (INIT pin “L” level to “H” level) after the power supply has stabilized.
• Caution on Operations during PLL Clock Mode
On this microcontroller, if in case the crystal oscillator breaks off or an external reference clock input stops while
the PLL clock mode is selected, a self-oscillator circuit contained in the PLL may continue its operation at its
self-running frequency.
However, FUJITSU MICROELECTRONICS will not guarantee results of operations if such failure occurs.
DS07-16908-1E
29
MB91625 Series
■ BLOCK DIAGRAM
FR80 CPU
Internal program
memory
Flash memory
Step-down regulator
Crossbar switch
RAM
On-chip bus
DMAC, 8 channels
Peripheral bus
bridge
Interrupt controller
Delay interrupt
32-bit peripheral bus
Watchdog timer
16-bit peripheral bus
Clock control
Watch counter
External interrupt,
32 channels
16-bit reload timer,
3 channels
Base timer, 16 channels
32-bit free-run timer, 2 channels
Up/Down counter,
4 channels
32-bit input capture, 8 channels
A/D converter,
16 channels (1 unit)
32-bit output compare, 8 channels
D/A converter, 2 channels
Multifunction serial interface,
8 channels
Ports
Ports
Clock generation
Multifunction serial interface with
FIFO, 4 channels
Ports
30
DS07-16908-1E
MB91625 Series
■ MEMORY SPACE
1. Memory Space
The FR family has 4 Gbytes of logical address space (232 addresses) available to the CPU by linear access.
• Direct Addressing Areas
The following areas in the address space are used as I/O areas.
These areas are called direct addressing areas, and the address of an operand in these areas can be specified
directly within an instruction. The size of the directly addressable area depends on the length of the data being
accessed as follows.
• Byte data access
: 0000 0000H to 0000 00FFH
• Half word data access : 0000 0000H to 0000 01FFH
• Word data access
: 0000 0000H to 0000 03FFH
DS07-16908-1E
31
MB91625 Series
2. Memory Map
MB91F627
Flash 512 Kbytes
RAM 48 Kbytes
0000 0000H
I/O area
(Direct addressing)
0000 0400H
I/O area
0001 0000H
Reserved
0003 4000H
0004 0000H
Built-in RAM area
48 Kbytes
Reserved
0008 0000H
Flash area
512 Kbytes
000F 0000H
0010 0000H
Small-sector area
Reserved
FFFF FFFFH
Notes: • Small sector area is related to flash products only. Please refer to “Flash Memory” in the “Hardware
Manual” for more details.
• Do not access the reserved areas.
32
DS07-16908-1E
MB91625 Series
■ I/O MAP
[How to read the table]
Register
Address
Block
+0
+1
+2
+3
0000 0000H
PDR0 [R/W] B, H
XXXXXXXX
PDR1 [R/W] B, H
XXXXXXXX
PDR2 [R/W] B, H
XXXXXXXXXXX
PDR3 [R/W] B, H
XXXXXXXX
0000 003CH
WDTCR0 [R/W]
B, H
-0--0000
WDTCPR0 [R/W]
B, H
00000000
⎯
Watchdog
timer
0000 0040H
EIRR0 [R/W] B, H, W
000 0000
ENIR0 [R/W]
B, H, W
00000000
ELVR0 [R/W] B, H, W
00000000 00000000
External
interrupt
0 to 7
Initial value after reset
“1” : Initial value“1”
“0” : Initial value“0”
“X” : Initial value undefined
“ - ” : Reserved bit or undefined bit
Port data
register
⎯ : Reserved area
Access unit
(B : byte, H : half word, W : word)
Read/write attribute
“R”
: Indicates that there is a read only bit.
“R/W” : Indicates that there is a read/write bit.
“W” : Indicates that there is a write only bit.
Register name (column 1 of the register is at address 4n, column 2 is
at address 4 n + 2...)
Leftmost register address (For word-length access, column 1 of the
register is the MSB of the data.)
Notes: • When performing a data access, the addresses should be as below.
- Word access : Address should be multiples of 4 (least significant 2 bits should be "00B")
- Half word access : Address should be multiples of 2 (least significant bit should be "0B")
- Byte access : ⎯
• Do not access the reserved areas.
DS07-16908-1E
33
MB91625 Series
Address
Register
+0
+1
+2
+3
0000 0000H
PDR0 [R/W] B,H
XXXXXXXX
PDR1 [R/W] B,H
XXXXXXXX
PDR2 [R/W] B,H
XXXXXXXX
PDR3 [R/W] B,H
XXXXXXXX
0000 0004H
PDR4 [R/W] B,H
XXXXXXXX
PDR5 [R/W] B,H
XXXXXXXX
PDR6 [R/W] B,H
XXXXXXXX
PDR7 [R/W] B,H
XXXXXXXX
0000 0008H
PDR8 [R/W] B,H
XXXXXXXX
PDR9 [R/W] B,H
-----XXX
PDRA [R/W] B,H
XXXXXXXX
⎯
0000 000CH
to
0000 0010H
0000 0014H
Port data
register
⎯
PDRK [R/W] B
-----XXX
Block
⎯
0000 0018H
to
0000 001CH
⎯
0000 0020H
to
0000 0038H
⎯
Reserved
0000 003CH
WDTCR0 [R/W]
B,H
-0--0000
WDTCPR0 [R/W]
B,H
00000000
⎯
Watchdog
timer
0000 0040H
EIRR0 [R/W]
B,H,W
00000000
ENIR0 [R/W]
B,H,W
00000000
ELVR0 [R/W] B,H,W
00000000 00000000
External
interrupt
0 to 7
0000 0044H
DICR [R/W] B
-------0
⎯
Delay
interrupt
0000 0048H
TMRLRA0 [R/W] H
XXXXXXXX XXXXXXXX
TMR0 [R] H
XXXXXXXX XXXXXXXX
0000 004CH
⎯
TMCSR0 [R/W] H
--000000 --000000
0000 0050H
TMRLRA1 [R/W] H
XXXXXXXX XXXXXXXX
TMR1 [R] H
XXXXXXXX XXXXXXXX
0000 0054H
⎯
TMCSR1 [R/W] H
--000000 --000000
0000 0058H
TMRLRA2 [R/W] H
XXXXXXXX XXXXXXXX
TMR2 [R] H
XXXXXXXX XXXXXXXX
0000 005CH
⎯
TMCSR2 [R/W] H
--000000 --000000
16-bit
reload timer
ch.0
16-bit
reload timer
ch.1
16-bit
reload timer
ch.2
(Continued)
34
DS07-16908-1E
MB91625 Series
Register
Address
0000 0060H
+0
+1
+2
+3
SCR0
[R/W] B,H,W
0--00000
SMR0 [R/W]
B,H,W
000-0000
SSR0 [R,R/W]
B,H,W
0-000011
ESCR0
[R/W] B,H,W
-0000000
BGR10 [R/W]
H,W
00000000
BGR00 [R/W]
H,W
00000000
SSR1 [R,R/W]
B,H,W
0-000011
ESCR1 [R/W] /
IBSR1
[R,R/W] B,H,W*2
-0000000
BGR11 [R/W]
H,W
00000000
BGR01 [R/W]
H,W
00000000
RDR0[R] / TDR0 [W] B,H,W*1
-------0 00000000
0000 0064H
SCR1 [R/W] /
IBCR1
[R,R/W] B,H,W*2
0--00000
0000 0068H
SMR1 [R/W]
B,H,W
000-0000
RDR1 [R] / TDR1[W] B,H,W*1
-------0 00000000
0000 006CH
0000 0070H
ISMK1 [R/W] B,H*2
--------
ISBA1 [R/W]
B,H*2
--------
0000 0074H
SCR2 [R/W] /
IBCR2
[R,R/W] B,H,W*2
0--00000
SMR2 [R/W]
B,H,W
000-0000
RDR2 [R] / TDR2 [W] B,H,W*1
-------0 00000000
0000 0078H
0000 007CH
ISMK2 [R/W] B,H*2
--------
ISBA2 [R/W]
B,H*2
--------
0000 0080H
SCR3 [R/W] /
IBCR3
[R,R/W] B,H,W*2
0--00000
SMR3 [R/W]
B,H,W
000-0000
RDR3 [R] / TDR3 [W] B,H,W*1
-------0 00000000
0000 0084H
0000 0088H
ISMK3 [R/W] B,H*2
--------
ISBA3 [R/W]
B,H*2
--------
Block
Multi-function
serial interface
ch.0
Multi-function
serial interface
ch.1
⎯
SSR2 [R,R/W]
B,H,W
0-000011
ESCR2 [R/W] /
IBSR2 [R,R/W]
B,H,W*2
-0000000
BGR12 [R/W]
H,W
00000000
BGR02 [R/W]
H,W
00000000
Multi-function
serial interface
ch.2
⎯
SSR3 [R,R/W]
B,H,W
0-000011
ESCR3 [R/W] /
IBSR3 [R,R/W]
B,H,W*2
-0000000
BGR13 [R/W]
H,W
00000000
BGR03 [R/W]
H,W
00000000
Multi-function
serial interface
ch.3
⎯
(Continued)
DS07-16908-1E
35
MB91625 Series
Address
0000 008CH
0000 0090H
Register
+0
+1
+2
+3
SCR4 [R/W] /
IBCR4
[R,R/W] B,H,W*2
0--00000
SMR4 [R/W]
B,H,W
000-0000
SSR4 [R,R/W]
B,H,W
0-000011
ESCR4 [R/W] /
IBSR4 [R,R/W]
B,H,W*2
-0000000
BGR14 [R/W]
H,W
00000000
BGR04 [R/W]
H,W
00000000
RDR4 [R] / TDR4 [W] B,H,W*1
-------0 00000000
0000 0094H
ISMK4 [R/W] B,H*2
--------
ISBA4 [R/W]
B,H*2
--------
0000 0098H
SCR5 [R/W] /
IBCR5
[R,R/W] B,H,W*2
0--00000
SMR5 [R/W]
B,H,W
000-0000
0000 009CH
ISMK5 [R/W] B,H*2
--------
ISBA5 [R/W]
B,H*2
--------
0000 00A4H
SCR6 [R/W] /
IBCR6 [R,R/W]
B,H,W*2
0--00000
SMR6 [R/W]
B,H,W
000-0000
0000 00A8H
ISMK6 [R/W] B,H*2
--------
ISBA6 [R/W]
B,H*2
--------
0000 00B0H
SCR7 [R/W] /
IBCR7
[R,R/W] B,H,W*2
0--00000
SMR7 [R/W]
B,H,W
000-0000
0000 00B4H
0000 00B8H
0000 00BCH
ESCR5 [R/W] /
IBSR5 [R,R/W]
B,H,W*2
-0000000
BGR15 [R/W]
H,W
00000000
BGR05 [R/W]
H,W
00000000
Multi-function
serial interface
ch.5
SSR6 [R,R/W]
B,H,W
0-000011
ESCR6 [R/W] /
IBSR6
[R,R/W] B,H,W*2
-0000000
BGR16 [R/W]
H,W
00000000
BGR06 [R/W]
H,W
00000000
Multi-function
serial interface
ch.6
⎯
RDR7 [R] / TDR7 [W] B,H,W*1
-------0 00000000
ISMK7 [R/W] B,H*2
--------
SSR5 [R,R/W]
B,H,W
0-000011
⎯
RDR6 [R] / TDR6 [W] B,H,W*1
-------0 00000000
0000 00ACH
Multi-function
serial interface
ch.4
⎯
RDR5 [R] / TDR5 [W] B,H,W*1
-------0 00000000
0000 00A0H
Block
ISBA7 [R/W]
B,H*2
--------
SSR7 [R,R/W]
B,H,W
0-000011
ESCR7 [R/W]/
IBSR7 [R,R/W]
B,H,W*2
-0000000
BGR17 [R/W]
H,W
00000000
BGR07 [R/W]
H,W
00000000
Multi-function
serial interface
ch.7
⎯
⎯
Reserved
(Continued)
36
DS07-16908-1E
MB91625 Series
Register
Address
+0
+1
+2
+3
0000 00C0H
RDRM0 [R] /
TDRM0
[W] B,H,W
00000000
RDRM1 [R] /
TDRM1
[W] B,H,W
00000000
RDRM2 [R] /
TDRM2
[W] B,H,W
00000000
RDRM3 [R] /
TDRM3
[W] B,H,W
00000000
0000 00C4H
RDRM4 [R] /
TDRM4
[W] B,H,W
00000000
RDRM5 [R] /
TDRM5
[W] B,H,W
00000000
RDRM6 [R] /
TDRM6
[W] B,H,W
00000000
RDRM7 [R] /
TDRM7
[W] B,H,W
00000000
0000 00C8H
SSEL0123 [R/W] B
------00
⎯
SSEL4567 [R/W] B
------00
⎯
⎯
0000 00CCH
SCR8 [R/W] /
IBCR8
[R,R/W] B,H,W*2
0--00000
0000 00D0H
SMR8 [R/W]
B,H,W
000-0000
0000 00D4H
RDR8 [R] / TDR8 [W] B,H,W*1
-------0 00000000
0000 00D8H
ISMK8 [R/W] B,H*2 ISBA8 [R/W] B,H*2
---------------
SSR8 [R,R/W]
B,H,W
0-000011
ESCR8 [R/W] /
IBSR8
[R,R/W] B,H,W*2
-0000000
BGR18 [R/W] H,W
00000000
BGR08 [R/W]
H,W
00000000
⎯
FCR18 [R/W]
B,H,W
---00100
FCR08 [R,R/W]
B,H,W
-0000000
FBYTE28 [R/W]
B,H,W
00000000
FBYTE18 [R/W]
B,H,W
00000000
0000 00E0H
SCR9 [R/W] /
IBCR9
[R,R/W] B,H,W*2
0--00000
SMR9 [R/W]
B,H,W
000-0000
SSR9 [R,R/W]
B,H,W
0-000011
ESCR9 [R/W] /
IBSR9 [R,R/W]
B,H,W*2
-0000000
BGR19 [R/W] H,W
00000000
BGR09 [R/W]
H,W
00000000
RDR9 [R] / TDR9 [W] B,H,W*1
-------0 00000000
0000 00E8H
ISMK9 [R/W] B,H*2 ISBA9 [R/W] B,H*2
---------------
0000 00ECH
FCR19 [R/W]
B,H,W
---00100
FCR09 [R,R/W]
B,H,W
-0000000
Multi-function
serial interface
data register
(mirror)
Multi-function
serial interface
serial clock
selection
Reserved
0000 00DCH
0000 00E4H
Block
⎯
FBYTE29 [R/W]
B,H,W
00000000
Multi-function
serial interface
ch.8
(FIFO)
Multi-function
serial interface
ch.9
(FIFO)
FBYTE19 [R/W]
B,H,W
00000000
(Continued)
DS07-16908-1E
37
MB91625 Series
Address
0000 00F0H
Register
+0
+1
+2
+3
SCR10 [R/W] /
IBCR10
[R,R/W] B,H,W*2
0--00000
SMR10 [R/W]
B,H,W
000-0000
SSR10 [R,R/W]
B,H,W
0-000011
ESCR10 [R/W] /
IBSR10
[R,R/W] B,H,W*2
-0000000
BGR110 [R/W]
H,W
00000000
BGR010 [R/W]
H,W
00000000
0000 00F4H
RDR10 [R] / TDR10 [W] B,H,W*1
-------0 00000000
0000 00F8H
ISMK10 [R/W]
B,H*2
--------
0000 00FCH
FCR110 [R/W]
B,H,W
---00100
0000 0100H
SCR11 [R/W] /
IBCR11
[R,R/W] B,H,W*2
0--00000
0000 0104H
ISBA10 [R/W]
B,H*2
--------
⎯
Block
Multi-function
serial interface
ch.10
(FIFO)
FCR010 [R,R/W] FBYTE210 [R/W] FBYTE110 [R/W]
B,H,W
B,H,W
B,H,W
-0000000
00000000
00000000
SMR11 [R/W]
B,H,W
000-0000
RDR11[R] / TDR11[W] B,H,W*1
-------0 00000000
SSR11 [R,R/W]
B,H,W
0-000011
ESCR11 [R/W] /
IBSR11
[R,R/W] B,H,W*2
-0000000
BGR111 [R/W]
H,W
00000000
BGR011 [R/W]
H,W
00000000
Multi-function
serial interface
ch.11
(FIFO)
0000 0108H
ISMK11 [R/W]
B,H*2
--------
0000 010CH
FCR111 [R/W]
B,H,W
---00100
0000 0110H
EIRR1 [R/W]
B,H,W
00000000
ENIR1 [R/W]
B,H,W
00000000
ELVR1 [R/W] B,H,W
00000000 00000000
External
interrupt
8 to 15
0000 0114H
EIRR2 [R/W]
B,H,W
00000000
ENIR2 [R/W]
B,H,W
00000000
ELVR2 [R/W] B,H,W
00000000 00000000
External
interrupt
16 to 23
0000 0118H
EIRR3 [R/W]
B,H,W
00000000
ENIR3 [R/W]
B,H,W
00000000
ELVR3 [R/W] B,H,W
00000000 00000000
External
interrupt
24 to 31
0000 011CH
ISBA11 [R/W]
B,H*2
--------
⎯
FCR011 [R,R/W] FBYTE211 [R/W] FBYTE111 [R/W]
B,H,W
B,H,W
B,H,W
-0000000
00000000
00000000
⎯
Reserved
(Continued)
38
DS07-16908-1E
MB91625 Series
Register
Address
+0
+1
+2
0000 0120H
ADCR0 [R/W] B,H
000-0000
ADSR0 [R,R/W]
B,H
00---000
⎯
0000 0124H
SCCR0 [R,R/W] B,H
1000-000
SFNS0 [R/W] B,H
----0000
SCFD0 [R] B,H
XXXXXXXX XX-XXXXX
SCIS10 [R/W]
B,H
00000000
⎯
0000 0128H
0000 012CH
PCCR0 [R,R/W] B,H
1000-000
PFNS0[R/W] B,H
------00
0000 0130H
PCIS0 [R/W] B
00000000
⎯
⎯
0000 0134H
0000 0138H
ADST00 [R/W] B,H
00100000
ADST10 [R/W] B,H
00100000
0000 0144H
0000 0148H
BT0TMR [R] H
00000000 00000000
⎯
0000 0154H
0000 0158H
0000 015CH
PCFD0[R] B,H
XXXXXXXX XXXXXXXX
CMPD0 [R/W]
B,H
00000000
CMPCR0 [R/W]
B,H
00000000
ADSS10 [R/W]
B,H
00000000
ADSS00 [R/W] B,H
00000000
ADCT0 [R/W] B
-----111
⎯
A/D
converter
unit 0
Reserved
BT0TMCR [R/W] B,H
-0000000 00000000
BT0STC [R/W] B
0000-000
⎯
BT0PDUT / BT0PRLH / BT0DTBF
[R/W] H
XXXXXXXX XXXXXXXX
BT0PCSR / BT0PRLL [R/W] H
XXXXXXXX XXXXXXXX
Base timer
ch.0
⎯
0000 014CH
0000 0150H
Block
SCIS00 [R/W] B,H
00000000
⎯
0000 013CH
0000 0140H
+3
BT1TMR [R] H
00000000 00000000
⎯
BT1TMCR [R/W] B,H
-0000000 00000000
BT1STC [R/W] B
0000-000
⎯
BT1PDUT / BT1PRLH / BT1DTBF
[R/W] H
XXXXXXXX XXXXXXXX
BT1PCSR / BT1PRLL [R/W] H
XXXXXXXX XXXXXXXX
Base timer
ch.1
⎯
(Continued)
DS07-16908-1E
39
MB91625 Series
Address
0000 0160H
0000 0164H
0000 0168H
Register
+0
+1
BT2TMR [R] H
00000000 00000000
0000 0174H
0000 0178H
+3
Block
BT2TMCR [R/W] B,H
-0000000 00000000
BT2STC [R/W] B
0000-000
⎯
⎯
BT2PDUT / BT2PRLH / BT2DTBF
[R/W] H
XXXXXXXX XXXXXXXX
BT2PCSR / BT2PRLL [R/W] H
XXXXXXXX XXXXXXXX
Base timer
ch.2
⎯
0000 016CH
0000 0170H
+2
BT3TMR [R] H
00000000 00000000
BT3TMCR [R/W] B,H
-0000000 00000000
BT3STC [R/W] B
0000-000
⎯
BT3PDUT / BT3PRLH / BT3DTBF
[R/W] H
XXXXXXXX XXXXXXXX
BT3PCSR / BT3PRLL [R/W] H
XXXXXXXX XXXXXXXX
0000 017CH
BTSEL0123 [R/W] B
00000000
0000 0180H
DACR0 [R/W]
B,H,W
-------0
⎯
Base timer
ch.3
⎯
DADR0 [R/W]
B,H,W
XXXXXXXX
DACR1 [R/W]
B,H,W
-------0
DADR1 [R/W]
B,H,W
XXXXXXXX
D/A
converter
0000 0184H
to
0000 018CH
⎯
0000 0190H
to
0000 01A8H
⎯
Reserved
0000 01ACH
ADCHE [R/W] B,H,W
-1111111 11111111 11111111 11111111
A/D channel
enable
IRPR1H [R] B,H
000-000-
IRPR1L [R] B,H
000-000-
0000 01B0H
IRPR0H [R] B
000-----
0000 01B4H
IRPR2H [R] B,H,W
0000----
IRPR2L [R] B,H,W IRPR3H [R] B,H,W IRPR3L [R] B,H,W
000----0000---00000---
0000 01B8H
IRPR4H [R] B,H,W
0000----
IRPR4L [R] B,H,W IRPR5H [R] B,H,W IRPR5L [R] B,H,W
000000-0000---0000----
0000 01BCH
IRPR6H [R] B,H,W
0000----
IRPR6L [R] B,H,W IRPR7H [R] B,H,W IRPR7L [R] B,H,W
0000---0000---0000----
⎯
Interrupt
request
batch read
function
(Continued)
40
DS07-16908-1E
MB91625 Series
Register
Address
0000 01C0H
+0
+1
+2
+3
RCRH0 [W] H,W
00000000
RCRL0 [W]
B,H,W
00000000
UDCRH0 [R] H,W
00000000
UDCRL0 [R]
B,H,W
00000000
⎯
CSR0 [R,R/W] B
00000000
CCR0 [R,R/W] B,H
00000000 -0001000
0000 01C4H
0000 01C8H
⎯
0000 01CCH
⎯
RCRH1 [W] H,W
00000000
0000 01D0H
RCRL1 [W]
B,H,W
00000000
CCR1 [R,R/W] B,H
00000000 -0001000
0000 01D4H
0000 01D8H
⎯
0000 01DCH
⎯
RCRH2 [W] H,W
00000000
0000 01E0H
RCRL2 [W]
B,H,W
00000000
CCR2 [R,R/W] B,H
00000000 -0001000
0000 01E4H
0000 01E8H
⎯
0000 01ECH
⎯
RCRH3 [W] H,W
00000000
0000 01F0H
RCRL3 [W]
B,H,W
00000000
CCR3 [R,R/W] B,H
00000000 -0001000
0000 01F4H
UDCRH1 [R] H,W
00000000
UDCRL1 [R]
B,H,W
00000000
⎯
CSR1 [R,R/W] B
00000000
UDCRH2 [R] H,W
00000000
UDCRL2 [R]
B,H,W
00000000
⎯
CSR2 [R,R/W] B
00000000
Up/down counter
ch.2
Reserved
UDCRH3 [R] H,W
00000000
UDCRL3 [R]
B,H,W
00000000
⎯
CSR3 [R,R/W] B
00000000
0000 01FCH
⎯
0000 0200H
CPCLR0 [R/W] W
11111111 11111111 11111111 11111111
0000 0204H
TCDT0 [R/W] W
00000000 00000000 00000000 00000000
TCCSL0 [R/W]
B,H
-1-00000
Up/down counter
ch.1
Reserved
⎯
TCCSH0 [R/W] B,H
0-----00
Up/down
counter ch.0
Reserved
0000 01F8H
0000 0208H
Block
Up/down counter
ch.3
Reserved
32-bit
Free-run timer
ch.0
⎯
(Continued)
DS07-16908-1E
41
MB91625 Series
Address
Register
+0
+1
+2
+3
0000 020CH
IPCP0 [R] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 0210H
IPCP1 [R] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 0214H
IPCP2 [R] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 0218H
IPCP3 [R] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 021CH
ICS01 [R/W] B
00000000
⎯
⎯
IPCP4 [R] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 0224H
IPCP5 [R] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 0228H
IPCP6 [R] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 022CH
IPCP7 [R] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
⎯
ICS45 [R/W] B
00000000
⎯
0000 0234H
OCCP0 [R/W] W
00000000 00000000 00000000 00000000
0000 0238H
OCCP1 [R/W] W
00000000 00000000 00000000 00000000
0000 023CH
OCCP2 [R/W] W
00000000 00000000 00000000 00000000
0000 0240H
OCCP3 [R/W] W
00000000 00000000 00000000 00000000
0000 0244H
OCSH1 [R/W]
B,H,W
---0--00
OCSL0 [R/W]
B,H,W
0000--00
OCSH3 [R/W]
B,H,W
---0--00
32-bit
Input capture
ch.0 to ch.3
ICS23 [R/W] B
00000000
0000 0220H
0000 0230H
Block
32-bit
Input capture
ch.4 to ch.7
ICS67 [R/W] B
00000000
32-bit
Output
compare
ch.0 to ch.3
OCSL2 [R/W]
B,H,W
0000--00
(Continued)
42
DS07-16908-1E
MB91625 Series
Register
Address
+0
+1
+2
+3
0000 0248H
OCCP4 [R/W] W
00000000 00000000 00000000 00000000
0000 024CH
OCCP5 [R/W] W
00000000 00000000 00000000 00000000
0000 0250H
OCCP6 [R/W] W
00000000 00000000 00000000 00000000
0000 0254H
OCCP7 [R/W] W
00000000 00000000 00000000 00000000
0000 0258H
OCSH5 [R/W]
B,H,W
---0--00
OCSL4 [R/W]
B,H,W
0000--00
0000 025CH
FRTSEL [R/W] B
------00
OCSH7 [R/W]
B,H,W
---0--00
Free-run timer
selector
⎯
CPCLR1 [R/W] W
11111111 11111111 11111111 11111111
0000 0264H
TCDT1 [R/W] W
00000000 00000000 00000000 00000000
TCCSH1 [R/W] B,H
0-----00
TCCSL1 [R/W]
B,H
-1-00000
0000 026CH
to
0000 031CH
0000 0320H
32-bit
Free-run timer
ch.1
⎯
⎯
FCTLR [R/W] H
-0--1011 --------
0000 0324H
to
0000 0334H
0000 0338H
32-bit
Output
compare
ch.4 to ch.7
OCSL6 [R/W]
B,H,W
0000--00
0000 0260H
0000 0268H
Block
Reserved
⎯
FSTR [R] B
-------1
⎯
Reserved
WREN [R/W] B,H
00000000 00000000
⎯
0000 033CH
⎯
0000 0340H
to
0000 037CH
⎯
Flash memory
control
Wild register
Reserved
(Continued)
DS07-16908-1E
43
MB91625 Series
Address
Register
+0
+1
+2
0000 0380H
WRAR00 [R/W] W
-------- --XXXXXX XXXXXXXX XXXXXX--
0000 0384H
WRDR00 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 0388H
WRAR01 [R/W] W
-------- --XXXXXX XXXXXXXX XXXXXX--
0000 038CH
WRDR01 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 0390H
WRAR02 [R/W] W
-------- --XXXXXX XXXXXXXX XXXXXX--
0000 0394H
WRDR02 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 0398H
WRAR03 [R/W] W
-------- --XXXXXX XXXXXXXX XXXXXX--
0000 039CH
WRDR03 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 03A0H
WRAR04 [R/W] W
-------- --XXXXXX XXXXXXXX XXXXXX--
0000 03A4H
WRDR04 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 03A8H
WRAR05 [R/W] W
-------- --XXXXXX XXXXXXXX XXXXXX--
0000 03ACH
WRDR05 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 03B0H
WRAR06 [R/W] W
-------- --XXXXXX XXXXXXXX XXXXXX--
+3
Block
Wild register
(Continued)
44
DS07-16908-1E
MB91625 Series
Address
Register
+0
+1
+2
0000 03B4H
WRDR06 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 03B8H
WRAR07 [R/W] W
-------- --XXXXXX XXXXXXXX XXXXXX--
0000 03BCH
WRDR07 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 03C0H
WRAR08 [R/W] W
-------- --XXXXXX XXXXXXXX XXXXXX--
0000 03C4H
WRDR08 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 03C8H
WRAR09 [R/W] W
-------- --XXXXXX XXXXXXXX XXXXXX--
0000 03CCH
WRDR09 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 03D0H
WRAR10 [R/W] W
-------- --XXXXXX XXXXXXXX XXXXXX--
0000 03D4H
WRDR10 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 03D8H
WRAR11 [R/W] W
-------- --XXXXXX XXXXXXXX XXXXXX--
0000 03DCH
WRDR11 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 03E0H
WRAR12 [R/W] W
-------- --XXXXXX XXXXXXXX XXXXXX--
0000 03E4H
WRDR12 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 03E8H
WRAR13 [R/W] W
-------- --XXXXXX XXXXXXXX XXXXXX--
0000 03ECH
WRDR13 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 03F0H
WRAR14 [R/W] W
-------- --XXXXXX XXXXXXXX XXXXXX--
0000 03F4H
WRDR14 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 03F8H
WRAR15 [R/W] W
-------- --XXXXXX XXXXXXXX XXXXXX--
0000 03FCH
WRDR15 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
+3
Block
Wild register
(Continued)
DS07-16908-1E
45
MB91625 Series
Address
Register
+0
+1
+2
+3
0000 0400H
DDR0 [R/W] B,H
00000000
DDR1 [R/W] B,H
00000000
DDR2 [R/W] B,H
00000000
DDR3 [R/W] B,H
00000000
0000 0404H
DDR4 [R/W] B,H
00000000
DDR5 [R/W] B,H
00000000
DDR6 [R/W] B,H
00000000
DDR7[R/W] B,H
00000000
0000 0408H
DDR8 [R/W] B,H
00000000
DDR9 [R/W] B,H
-----000
DDRA [R/W] B
00000000
⎯
0000 040CH
to
0000 0410H
0000 0414H
Data direction
register
⎯
DDRK [R/W] B
-----000
⎯
0000 0418H
to
0000 041CH
⎯
0000 0420H
PCR0 [R/W] B,H
00000000
PCR1 [R/W] B,H
00000000
0000 0424H
⎯
PCR5 [R/W] B
00000000
PCR6 [R/W] B,H
00000000
PCR7[R/W] B,H
00000000
0000 0428H
PCR8 [R/W] B,H
00000000
PCR9 [R/W] B,H
-----000
PCRA [R/W] B
00000000
⎯
0000 042CH
to
0000 0430H
0000 0434H
0000 0438H
to
0000 043CH
Block
⎯
⎯
PCRK [R/W] B
-----0--
Pull-up
control
register
⎯
⎯
(Continued)
46
DS07-16908-1E
MB91625 Series
Address
Register
+0
+1
+2
+3
0000 0440H
ICR00 [R,R/W]
B,H,W
---11111
ICR01 [R,R/W]
B,H,W
---11111
ICR02 [R,R/W]
B,H,W
---11111
ICR03 [R,R/W]
B,H,W
---11111
0000 0444H
ICR04 [R,R/W]
B,H,W
---11111
ICR05 [R,R/W]
B,H,W
---11111
ICR06 [R,R/W]
B,H,W
---11111
ICR07 [R,R/W]
B,H,W
---11111
0000 0448H
ICR08 [R,R/W]
B,H,W
---11111
ICR09 [R,R/W]
B,H,W
---11111
ICR10 [R,R/W]
B,H,W
---11111
ICR11 [R,R/W]
B,H,W
---11111
0000 044CH
ICR12 [R,R/W]
B,H,W
---11111
ICR13 [R,R/W]
B,H,W
---11111
ICR14 [R,R/W]
B,H,W
---11111
ICR15 [R,R/W]
B,H,W
---11111
0000 0450H
ICR16 [R,R/W]
B,H,W
---11111
ICR17 [R,R/W]
B,H,W
---11111
ICR18 [R,R/W]
B,H,W
---11111
ICR19 [R,R/W]
B,H,W
---11111
0000 0454H
ICR20 [R,R/W]
B,H,W
---11111
ICR21 [R,R/W]
B,H,W
---11111
ICR22 [R,R/W]
B,H,W
---11111
ICR23 [R,R/W]
B,H,W
---11111
0000 0458H
ICR24 [R,R/W]
B,H,W
---11111
ICR25 [R,R/W]
B,H,W
---11111
ICR26 [R,R/W]
B,H,W
---11111
ICR27 [R,R/W]
B,H,W
---11111
0000 045CH
ICR28 [R,R/W]
B,H,W
---11111
ICR29 [R,R/W]
B,H,W
---11111
ICR30 [R,R/W]
B,H,W
---11111
ICR31 [R,R/W]
B,H,W
---11111
0000 0460H
ICR32 [R,R/W]
B,H,W
---11111
ICR33 [R,R/W]
B,H,W
---11111
ICR34 [R,R/W]
B,H,W
---11111
ICR35 [R,R/W]
B,H,W
---11111
0000 0464H
ICR36 [R,R/W]
B,H,W
---11111
ICR37 [R,R/W]
B,H,W
---11111
ICR38 [R,R/W]
B,H,W
---11111
ICR39 [R,R/W]
B,H,W
---11111
0000 0468H
ICR40 [R,R/W]
B,H,W
---11111
ICR41 [R,R/W]
B,H,W
---11111
ICR42 [R,R/W]
B,H,W
---11111
ICR43 [R,R/W]
B,H,W
---11111
0000 046CH
ICR44 [R,R/W]
B,H,W
---11111
ICR45 [R,R/W]
B,H,W
---11111
ICR46 [R,R/W]
B,H,W
---11111
ICR47 [R,R/W]
B,H,W
---11111
0000 0470H
to
0000 047CH
⎯
Block
Interrupt
control
Reserved
(Continued)
DS07-16908-1E
47
MB91625 Series
Address
0000 0480H
Register
+1
+2
+3
RSTRR [R] B,H,W
11-X---X*3
RSTCR [R/W]
B,H,W
000----0
STBCR [R/W]
B,H,W
0000--11
SLPRR [R/W]
B,H,W
00000000
Reset control/
Power
consumption
control
DIVR2 [R/W] B
0011----
⎯
Clock division
control
⎯
0000 0484H
0000 0488H
DIVR0 [R/W] B,H
000-----
⎯
⎯
0000 048CH
0000 0490H
IORR0 [R/W]
B,H,W
-0000000
IORR1 [R/W]
B,H,W
-0000000
IORR2 [R/W]
B,H,W
-0000000
IORR3 [R/W]
B,H,W
-0000000
0000 0494H
IORR4 [R/W]
B,H,W
-0000000
IORR5 [R/W]
B,H,W
-0000000
IORR6 [R/W]
B,H,W
-0000000
IORR7 [R/W]
B,H,W
-0000000
0000 0498H
to
0000 049CH
⎯
Peripheral DMA
transmission request control
Reserved
0000 04A0H
PFR0 [R/W] B,H
00000000
PFR1 [R/W] B,H
00000000
PFR2 [R/W] B,H
00000000
PFR3 [R/W] B,H
00000000
0000 04A4H
PFR4 [R/W] B,H
00000000
PFR5 [R/W] B,H
00000000
PFR6 [R/W] B,H
00-00-0-
PFR7[R/W] B,H
00000000
0000 04A8H
PFR8 [R/W] B
00000000
⎯
PFRA [R/W] B
00-00000
⎯
0000 04ACH
to
0000 04B4H
Block
+0
Port function
register
⎯
(Continued)
48
DS07-16908-1E
MB91625 Series
Register
Address
+0
+1
+2
+3
0000 04B8H
EPFR0 [R/W] B,H
--000000
EPFR1 [R/W] B,H
--000000
EPFR2 [R/W] B,H
--000000
EPFR3 [R/W] B,H
--000000
0000 04BCH
EPFR4 [R/W] B,H
00000000
EPFR5 [R/W] B,H
00000000
EPFR6 [R/W] B,H
00000000
EPFR7 [R/W] B,H
---00000
0000 04C0H
EPFR8 [R/W] B,H
---00000
EPFR9 [R/W] B,H EPFR10 [R/W] B,H EPFR11 [R/W] B,H
---00000
---00000
---00000
0000 04C4H
EPFR12 [R/W] B,H EPFR13 [R/W] B,H EPFR14 [R/W] B,H EPFR15 [R/W] B,H
---00000
---00000
---00000
---00000
0000 04C8H
EPFR16 [R/W] B,H EPFR17 [R/W] B,H EPFR18 [R/W] B,H EPFR19 [R/W] B,H
---00000
---00000
00000000
-0000001
0000 04CCH
EPFR20 [R/W] B,H EPFR21 [R/W] B,H EPFR22 [R/W] B,H EPFR23 [R/W] B,H
--000000
--000000
--000000
--000000
0000 04D0H
EPFR24 [R/W] B,H EPFR25 [R/W] B,H EPFR26 [R/W] B,H EPFR27 [R/W] B,H
--000000
--000000
--000000
--000000
0000 04D4H
EPFR28 [R/W] B,H EPFR29 [R/W] B,H EPFR30 [R/W] B,H EPFR31 [R/W] B,H
00000000
00000000
----0000
-0000000
0000 04D8H
EPFR32 [R/W] B,H EPFR33 [R/W] B,H
00000000
--000000
0000 04DCH
⎯
0000 04E0H
to
0000 04ECH
⎯
EPFR34 [R/W] B
-0000000
Block
Extended port
function
register
⎯
Reserved
0000 04F0H
ICSEL0 [R/W]
B,H,W
-----000
ICSEL1 [R/W]
B,H,W
-----000
ICSEL2 [R/W]
B,H,W
-----000
ICSEL3 [R/W]
B,H,W
-----000
0000 04F4H
ICSEL4 [R/W]
B,H,W
------00
ICSEL5 [R/W]
B,H,W
-----000
ICSEL6 [R/W]
B,H,W
------00
ICSEL7 [R/W]
B,H,W
-------0
0000 04F8H
ICSEL8 [R/W]
B,H,W
------00
ICSEL9 [R/W]
B,H,W
-----000
ICSEL10 [R/W]
B,H,W
----0000
ICSEL11 [R/W]
B,H,W
----0000
0000 04FCH
ICSEL12 [R/W]
B,H
----0000
ICSEL13 [R/W]
B,H
-----0-0
ICSEL14 [R/W]
B
------00
⎯
DMA start
request clear
select function
(Continued)
DS07-16908-1E
49
MB91625 Series
Address
Register
+0
+1
0000 0500H
to
0000 050CH
0000 0510H
0000 0514H
0000 0518H
+2
⎯
CSELR [R/W]
B,H,W
001---00
CMONR [R]
B,H,W
001---00
PLLCR [R/W] B,H
--000000 11110000
WCRD [R] B,H
--000000
MTMCR [R/W]
B,H,W
00001111
STMCR [R/W]
B,H,W
0000-111
CSTBR [R/W] B
-0000000
⎯
Clock
generation/
Main timer/
Sub timer
⎯
Clock counter
WCRL [R/W] B,H WCCR [R,R/W] B
--000000
00--0000
⎯
0000 0C00H
DCCR0 [R/W] W
0----000 --00--00 00000000 0-000000
DCSR0 [R,R/W] H
0------- -----000
Reserved
DTCR0 [R/W] H
00000000 00000000
0000 0C08H
DSAR0 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 0C0CH
DDAR0 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 0C10H
DCCR1 [R/W] W
0----000 --00--00 00000000 0-000000
0000 0C14H
DCSR1 [R,R/W] H
0------- -----000
DTCR1 [R/W] H
00000000 00000000
0000 0C18H
DSAR1 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 0C1CH
DDAR1 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 0C20H
DCCR2 [R/W] W
0----000 --00--00 00000000 0-000000
0000 0C24H
DCSR2 [R,R/W] H
0------- -----000
DSAR2 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 0C2CH
DDAR2 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 0C30H
DCCR3 [R/W] W
0----000 --00--00 00000000 0-000000
DCSR3 [R,R/W] H
0------- -----000
DMAC
DTCR2 [R/W] H
00000000 00000000
0000 0C28H
0000 0C34H
Block
Reserved
0000 051CH
to
0000 0BFCH
0000 0C04H
+3
DTCR3 [R/W] H
00000000 00000000
(Continued)
50
DS07-16908-1E
MB91625 Series
Address
Register
+0
+1
+2
+3
0000 0C38H
DSAR3 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 0C3CH
DDAR3 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 0C40H
DCCR4 [R/W] W
0----000 --00--00 00000000 0-000000
0000 0C44H
DCSR4 [R,R/W] H
0------- -----000
DTCR4 [R/W] H
00000000 00000000
0000 0C48H
DSAR4 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 0C4CH
DDAR4 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 0C50H
DCCR5 [R/W] W
0----000 --00--00 00000000 0-000000
0000 0C54H
DCSR5 [R,R/W] H
0------- -----000
DTCR5 [R/W] H
00000000 00000000
0000 0C58H
DSAR5 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 0C5CH
DDAR5 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 0C60H
DCCR6 [R/W] W
0----000 --00--00 00000000 0-000000
0000 0C64H
DCSR6 [R,R/W] H
0------- -----000
DMAC
DTCR6 [R/W] H
00000000 00000000
0000 0C68H
DSAR6 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 0C6CH
DDAR6 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 0C70H
DCCR7 [R/W] W
0----000 --00--00 00000000 0-000000
0000 0C74H
DCSR7 [R,R/W] H
0------- -----000
DTCR7 [R/W] H
00000000 00000000
0000 0C78H
DSAR7 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 0C7CH
DDAR7 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 0C80H
to
0000 0DF0H
⎯
0000 0DF4H
⎯
Block
DILVR [R,R/W] B
---11111
(Continued)
DS07-16908-1E
51
MB91625 Series
Address
Register
+0
+1
+2
+3
Block
0000 0DF8H
DMACR [R/W] W
0------- -------- 0------- --------
DMAC
0000 0DFCH
to
0000 0F3CH
⎯
Reserved
0000 0F40H
BT4TMR [R] H
00000000 00000000
0000 0F44H
⎯
0000 0F48H
BT4STC [R/W] B
0000-000
Base timer ch.4
⎯
0000 0F50H
BT5TMR [R] H
00000000 00000000
0000 0F54H
⎯
BT5TMCR [R/W] B,H
-0000000 00000000
BT5STC [R/W] B
0000-000
⎯
BT5PDUT / BT5PRLH / BT5DTBF
[R/W] H
XXXXXXXX XXXXXXXX
BT5PCSR / BT5PRLL [R/W] H
XXXXXXXX XXXXXXXX
Base timer ch.5
⎯
0000 0F5CH
0000 0F60H
BT6TMR [R] H
00000000 00000000
0000 0F64H
⎯
0000 0F68H
⎯
BT4PDUT / BT4PRLH / BT4DTBF
[R/W] H
XXXXXXXX XXXXXXXX
BT4PCSR / BT4PRLL [R/W] H
XXXXXXXX XXXXXXXX
0000 0F4CH
0000 0F58H
BT4TMCR [R/W] B,H
-0000000 00000000
BT6TMCR [R/W] B,H
-0000000 00000000
BT6STC [R/W] B
0000-000
⎯
BT6PDUT / BT6PRLH / BT6DTBF
[R/W] H
XXXXXXXX XXXXXXXX
BT6PCSR / BT6PRLL [R/W] H
XXXXXXXX XXXXXXXX
Base timer ch.6
⎯
0000 0F6CH
0000 0F70H
BT7TMR [R] H
00000000 00000000
0000 0F74H
⎯
BT7TMCR [R/W] B,H
-0000000 00000000
BT7STC [R/W] B
0000-000
0000 0F78H
BT7PCSR / BT7PRLL [R/W] H
XXXXXXXX XXXXXXXX
0000 0F7CH
BTSEL4567
[R/W] B
00000000
⎯
BT7PDUT / BT7PRLH / BT7DTBF
[R/W] H
XXXXXXXX XXXXXXXX
Base timer ch.7
⎯
(Continued)
52
DS07-16908-1E
MB91625 Series
Address
Register
+0
+1
0000 0F80H
BT8TMR [R] H
00000000 00000000
0000 0F84H
⎯
0000 0F88H
Block
⎯
BT8PDUT / BT8PRLH / BT8DTBF
[R/W] H
XXXXXXXX XXXXXXXX
BT8PCSR / BT8PRLL [R/W] H
XXXXXXXX XXXXXXXX
Base timer ch.8
⎯
0000 0F90H
BT9TMR [R] H
00000000 00000000
0000 0F94H
⎯
BT9TMCR [R/W] B,H
-0000000 00000000
BT9STC [R/W] B
0000-000
⎯
BT9PDUT / BT9PRLH / BT9DTBF
[R/W] H
XXXXXXXX XXXXXXXX
BT9PCSR / BT9PRLL [R/W] H
XXXXXXXX XXXXXXXX
Base timer ch.9
⎯
0000 0F9CH
0000 0FA0H
BTATMR [R] H
00000000 00000000
0000 0FA4H
⎯
0000 0FA8H
+3
BT8TMCR [R/W] B,H
-0000000 00000000
BT8STC [R/W] B
0000-000
0000 0F8CH
0000 0F98H
+2
BTATMCR [R/W] B,H
-0000000 00000000
BTASTC [R/W] B
0000-000
⎯
BTAPDUT / BTAPRLH / BTADTBF
[R/W] H
XXXXXXXX XXXXXXXX
BTAPCSR / BTAPRLL [R/W] H
XXXXXXXX XXXXXXXX
Base timer ch.10
⎯
0000 0FACH
0000 0FB0H
BTBTMR [R] H
00000000 00000000
0000 0FB4H
⎯
BTBTMCR [R/W] B,H
-0000000 00000000
BTBSTC [R/W] B
0000-000
0000 0FB8H
BTBPCSR / BTBPRLL [R/W] H
XXXXXXXX XXXXXXXX
0000 0FBCH
BTSEL89AB
[R/W] B
00000000
⎯
BTBPDUT / BTBPRLH / BTBDTBF
[R/W] H
XXXXXXXX XXXXXXXX
Base timer ch.11
⎯
(Continued)
DS07-16908-1E
53
MB91625 Series
(Continued)
Address
Register
+0
+1
0000 0FC0H
BTCTMR [R] H
00000000 00000000
0000 0FC4H
⎯
0000 0FC8H
0000 0FD4H
⎯
BTDTMCR [R/W] B,H
-0000000 00000000
BTDSTC [R/W] B
0000-000
⎯
BTDPDUT / BTDPRLH / BTDDTBF
[R/W] H
XXXXXXXX XXXXXXXX
BTDPCSR / BTDPRLL [R/W] H
XXXXXXXX XXXXXXXX
Base timer ch.13
⎯
0000 0FDCH
0000 0FE0H
BTETMR [R] H
00000000 00000000
0000 0FE4H
⎯
BTETMCR [R/W] B,H
-0000000 00000000
BTESTC [R/W] B
0000-000
⎯
BTEPDUT / BTEPRLH / BTEDTBF
[R/W] H
XXXXXXXX XXXXXXXX
BTEPCSR / BTEPRLL [R/W] H
XXXXXXXX XXXXXXXX
Base timer ch.14
⎯
0000 0FECH
0000 0FF0H
BTFTMR [R] H
00000000 00000000
0000 0FF4H
⎯
0000 0FFCH
Base timer ch.12
⎯
BTDTMR [R] H
00000000 00000000
0000 0FF8H
Block
⎯
BTCPDUT / BTCPRLH / BTCDTBF
[R/W] H
XXXXXXXX XXXXXXXX
BTCPCSR / BTCPRLL [R/W] H
XXXXXXXX XXXXXXXX
0000 0FD0H
0000 0FE8H
+3
BTCTMCR [R/W] B,H
-0000000 00000000
BTCSTC [R/W] B
0000-000
0000 0FCCH
0000 0FD8H
+2
BTFTMCR [R/W] B,H
-0000000 00000000
BTFSTC [R/W] B
0000-000
BTFPDUT / BTFPRLH / BTFDTBF
[R/W] H
XXXXXXXX XXXXXXXX
BTFPCSR / BTFPRLL [R/W] H
XXXXXXXX XXXXXXXX
BTSELCDEF
[R/W] B
00000000
0000 1000H
to
0000 FFFCH
⎯
Base timer ch.15
BTSSSR [W] H
XXXXXXXX XXXXXXXX
⎯
⎯
Reserved
*1 : Byte access is available only when accessing the lower 8 bits within 9 bits.
*2 : The register of I2C can not be read immediate after reset.
*3 : Value just after reset by INIT pin.
Do not access the reserved areas.
54
DS07-16908-1E
MB91625 Series
■ VECTOR TABLE
Interrupt number
Interrupt source (Peripheral resource)
Interrupt
Address of
Hexa- level setting Offset TBR default
Decimal
decimal register
Reset
0
00
⎯
3FCH
000F FFFCH
System reserved
1
01
⎯
3F8H
000F FFF8H
System reserved
2
02
⎯
3F4H
000F FFF4H
System reserved
3
03
⎯
3F0H
000F FFF0H
System reserved
4
04
⎯
3ECH
000F FFECH
System reserved
5
05
⎯
3E8H
000F FFE8H
System reserved
6
06
⎯
3E4H
000F FFE4H
System reserved
7
07
⎯
3E0H
000F FFE0H
System reserved
8
08
⎯
3DCH 000F FFDCH
INTE instruction
9
09
⎯
3D8H
000F FFD8H
System reserved
10
0A
⎯
3D4H
000F FFD4H
System reserved
11
0B
⎯
3D0H
000F FFD0H
Step trace trap
12
0C
⎯
3CCH 000F FFCCH
System reserved
13
0D
⎯
3C8H
000F FFC8H
Undefined instruction exception
14
0E
⎯
3C4H
000F FFC4H
15
0F
15(FH) fixed
3C0H
000F FFC0H
External interrupt request ch.0 to ch.7
16
10
ICR00
3BCH
000F FFBCH
External interrupt request ch.8 to ch.15
17
11
ICR01
3B8H
000F FFB8H
External interrupt request ch.16 to ch.23
18
12
ICR02
3B4H
000F FFB4H
External interrupt request ch.24 to ch.31
19
13
ICR03
3B0H
000F FFB0H
16-bit reload timer ch.0 to ch.2
20
14
ICR04
3ACH
000F FFACH
Reception interrupt request of UART/CSIO ch.0
21
15
ICR05
3A8H
000F FFA8H
Transmission interrupt request of UART/CSIO ch.0
Transmission bus idle interrupt request of UART/CSIO
ch.0
22
16
ICR06
3A4H
000F FFA4H
Reception interrupt request of UART/CSIO/ I2C ch.1
23
17
ICR07
3A0H
000F FFA0H
Transmission interrupt request of UART/CSIO/ I2C ch.1
Transmission bus idle interrupt request of UART/CSIO
ch.1
24
18
ICR08
39CH
000F FF9CH
Status interrupt request of I2C ch.1
25
19
ICR09
398H
000F FF98H
26
1A
ICR10
394H
000F FF94H
27
1B
ICR11
390H
000F FF90H
⎯
2
Reception interrupt request of UART/CSIO/I C ch.2
2
Transmission interrupt request of UART/CSIO/I C ch.2
Transmission bus idle interrupt request of UART/CSIO
ch.2
(Continued)
DS07-16908-1E
55
MB91625 Series
Interrupt number
Interrupt
level
setting
HexaDecimal
register
decimal
Interrupt source (Peripheral resource)
Status interrupt request of I2C ch.2
Offset
Address of
TBR default
28
1C
ICR12
38CH
000F FF8CH
29
1D
ICR13
388H
000F FF88H
Transmission interrupt request of UART/CSIO/I C
ch.3 Transmission bus idle interrupt request of UART/
CSIO ch.3 Status interrupt request of I2C ch.3
30
1E
ICR14
384H
000F FF84H
Reception interrupt request of UART/CSIO/I2C ch.4
31
1F
ICR15
380H
000F FF80H
Transmission interrupt request of UART/CSIO/I2C
ch.4 Transmission bus idle interrupt request of UART/
CSIO ch.4 Status interrupt request of I2C ch.4
32
20
ICR16
37CH
000F FF7CH
Reception interrupt request of UART/CSIO/I2C ch.5
33
21
ICR17
378H
000F FF78H
Transmission interrupt request of UART/CSIO/I C
ch.5 Transmission bus idle interrupt request of UART/
CSIO ch.5 Status interrupt request of I2C ch.5
34
22
ICR18
374H
000F FF74H
Reception interrupt request of UART/CSIO/ I2C ch.6
35
23
ICR19
370H
000F FF70H
Transmission interrupt request of UART/CSIO/I2C
ch.6 Transmission bus idle interrupt request of UART/
CSIO ch.6 Status interrupt request of I2C ch.6
36
24
ICR20
36CH
000F FF6CH
Reception interrupt request of UART/CSIO/I2C ch.7
32-bit input capture ch.4 to ch.7
37
25
ICR21
368H
000F FF68H
Transmission interrupt request of UART/CSIO/I2C
ch.7 Transmission bus idle interrupt request of UART/
CSIO ch.7 Status interrupt request of I2C ch.7
32-bit output compare ch.4 to ch.7
38
26
ICR22
364H
000F FF64H
Reception interrupt request of UART/CSIO/I2C ch.8 to
ch.11 Transmission interrupt request of UART/CSIO/
I2C ch.8 to ch.11 Transmission bus idle interrupt
request of UART/CSIO ch.8 to ch.11 Transmission
FIFO interrupt request UART/CSIO/I2C ch.8 to ch.11
Status interrupt request of I2C ch.8 to ch.11
39
27
ICR23
360H
000F FF60H
16-bit up/down counter ch.0 to ch.3
40
28
ICR24
35CH
000F FF5CH
Main timer/Sub timer/Watch counter
41
29
ICR25
358H
000F FF58H
Unit 0 of 10-bit A/D converter
• Scan conversion interrupt request
• Priority conversion interrupt request
• FIFO overrun interrupt request
• Conversion result compare interrupt request
42
2A
ICR26
354H
000F FF54H
32-bit free run timer ch.0, ch.1
43
2B
ICR27
350H
000F FF50H
32-bit input capture ch.0 to ch.3
44
2C
ICR28
34CH
000F FF4CH
32-bit output compare ch.0 to ch.3
45
2D
ICR29
348H
000F FF48H
2
Reception interrupt request of UART/CSIO/I C ch.3
2
2
(Continued)
56
DS07-16908-1E
MB91625 Series
(Continued)
Interrupt number
Interrupt source (Peripheral resource)
Interrupt
Hexa- level setting
Decimal
register
decimal
Offset
Address of
TBR default
Base timer ch.0
46
2E
ICR30
344H
000F FF44H
Base timer ch.1
47
2F
ICR31
340H
000F FF40H
Base timer ch.2
48
30
ICR32
33CH
000F FF3CH
Base timer ch.3
49
31
ICR33
338H
000F FF38H
Base timer ch.4, ch.5
50
32
ICR34
334H
000F FF34H
Base timer ch.6, ch.7
51
33
ICR35
330H
000F FF30H
Base timer ch.8, ch.9
52
34
ICR36
32CH
000F FF2CH
Base timer ch.10, ch.11
53
35
ICR37
328H
000F FF28H
Base timer ch.12
54
36
ICR38
324H
000F FF24H
Base timer ch.13
55
37
ICR39
320H
000F FF20H
Base timer ch.14, ch.15
56
38
ICR40
31CH
000F FF1CH
DMA controller (DMAC) ch.0
57
39
ICR41
318H
000F FF18H
DMA controller (DMAC) ch.1
58
3A
ICR42
314H
000F FF14H
DMA controller (DMAC) ch.2
59
3B
ICR43
310H
000F FF10H
DMA controller (DMAC) ch.3
60
3C
ICR44
30CH
000F FF0CH
DMA controller (DMAC) ch.4 to ch.7
61
3D
ICR45
308H
000F FF08H
System reserved
62
3E
ICR46
304H
000F FF04H
Delay interrupt
63
3F
ICR47
300H
000F FF00H
System reserved (Used by REALOS)
64
40
⎯
2FCH
000F FEFCH
System reserved (Used by REALOS)
65
41
⎯
2F8H
000F FEF8H
Used by INT instruction
66
to
255
42
to
FF
⎯
2F4H
to
000H
000F FEF4H
to
000F FC00H
DS07-16908-1E
57
MB91625 Series
■ PIN STATUS IN EACH CPU STATE
The terms used for pin status have the following meanings.
• When INIT = “L”
This is the period when the INIT pin is the “L” level.
• When INIT = “H”
The status immediately after the INIT pin changes from the “L” level to the “H” level.
• SLVL1
This bit is a standby level setting bit in the standby mode control register (STBCR).
• Input enabled
Indicates that the input function can be used.
• Input disabled
Indicates that the input function cannot be used.
• Output Hi-Z
Indicates that the output drive transistor is disabled and the pin is put in the Hi-Z state.
• Maintain previous state
Maintains the state that was being output immediately prior to entering the current mode.
If a built-in peripheral function is operating, the output follows the peripheral function.
If the pin is being used as a port, that output is maintained.
• Internal input fixed at “0”
The input gate connected to the pin is disconnected from the external input and internally connected to “0”.
• Input enabled when interrupt function selected and enabled
Inputs are allowed only when the pin is configured as an external interrupt request input pin and the external
interrupt request is enabled.
58
DS07-16908-1E
MB91625 Series
• List of pin status
Initial Value
Pin
name
Function name
INIT
INIT
⎯
X0
X0
X1
INIT = "L" INIT = "H"
Period
Period
Sleep
Mode
Standby Mode
SLVL1 = 0
SLVL1 = 1
⎯
Input enabled
Input enabled
Input
enabled
Input
enabled
Hi-Z or Input
enabled
Hi-Z or Input
enabled
X1
Input
enabled
Input
enabled
"H" output
or Input
enabled
"H" output or
Input
enabled
X0A
X0A (When INIT input, see PK1.
When port selected, input disabled)
Input disabled
Input disabled
Hi-Z or Input
enabled
Hi-Z or Input
enabled
X1A
X1A (When INIT input, see PK0.
When port selected, input disabled)
Input disabled
Input disabled
"H" output
or Input
enabled
"H" output or
Input
enabled
MD0
MD0
Input
enabled
Input
enabled
MD1
MD1
Input
enabled
Input
enabled
Input
enabled
Input
enabled
P00
P00/TIOA0/SOUT0_1/IN0
P01
P01/TIOB0/SIN0_1/IN1
P02
P02/TIOA1/SCK0_1/IN2
P03
P03/TIOB1/IN3
P04
P04/TIOA2/SOUT1/IN4
P05
P05/TIOB2/SIN1/IN5
P06
P06/TIOA3/SCK1/IN6
P07
P07/TIOB3/IN7
P10
P10/TIOA4/SOUT2/AIN0/INT0
P11
P11/TIOB4/SIN2/BIN0/INT1
P12
P12/TIOA5/SCK2/ZIN0/INT2
P13
P13/TIOB5/INT3
P14
P14/TIOA6/SOUT3/AIN1/INT4
P15
P15/TIOB6/SIN3/BIN1/INT5
P16
P16/TIOA7/SCK3/ZIN1/INT6
P17
P17/TIOB7/INT7
Input enabled
Output Hi-Z/
Internal input
"0" fixed
Output
Hi-Z
Output
Last state Last state
Hi-Z/Input
maintained maintained
enabled
Output
Hi-Z
Output Hi-Z/
Internal input
"0" fixed
Output
Input
Last state Last state
Hi-Z/Input
maintained maintained enabled when
enabled
the selection of
interrupt function
is enabled
(Continued)
DS07-16908-1E
59
MB91625 Series
Initial Value
Pin
name
Function name
P20
P20/TIOA8/SOUT4/AIN2
P21
P21/TIOB8/SIN4/BIN2
P22
P22/TIOA9/SCK4/ZIN2
P23
P23/TIOB9
P24
P24/TIOA10/SOUT5/AIN3/OUT0
P25
P25/TIOB10/SIN5/BIN3/OUT1
P26
P26/TIOA11/SCK5/ZIN3/OUT2
P27
P27/TIOB11/OUT3
P30
P30/TIOA12/SOUT6/INT8
P31
P31/TIOB12/SIN6/INT9
P32
P32/TIOA13/SCK6/INT10
P33
P33/TIOB13/INT11
P34
P34/TIOA14/SOUT7/OUT4/
INT12
P35
P35/TIOB14/SIN7/OUT5/INT13
P36
P36/TIOA15/SCK7/OUT6/INT14
P37
P37/TIOB15/OUT7/INT15
P40
P40/SOUT8
P41
P41/SIN8
P42
P42/SCK8
P43
P43
P44
P44/SOUT9
P45
P45/SIN9
P46
P46/SCK9
P47
P47
INIT = "L" INIT = "H"
Period
Period
Output
Hi-Z
Sleep
Mode
Standby Mode
SLVL1 = 0
SLVL1 = 1
Output
Output
Last state Last state
Hi-Z/Internal inHi-Z/Input
maintained maintained
put "0" fixed
enabled
Output
Hi-Z/Internal input "0" fixed
Output
Hi-Z
Output
Last state Last state
Hi-Z/Input
maintained maintained
enabled
Output
Hi-Z
Output
Output
Last state Last state
Hi-Z/Internal inHi-Z/Input
maintained maintained
put "0" fixed
enabled
Input
enabled when
the selection of
interrupt function is enabled
(Continued)
60
DS07-16908-1E
MB91625 Series
Initial Value
Pin
name
Function name
P50
P50/SOUT10/AIN0_1
P51
P51/SIN10/BIN0_1
P52
P52/SCK10/ZIN0_1
INIT = "L" INIT = "H"
Period
Period
Sleep
Mode
Standby Mode
SLVL1 = 0
SLVL1 = 1
Output
Hi-Z/Internal
input "0" fixed
Output
Hi-Z/Internal
input "0" fixed
P53
P53/FRCK1/INT21_2
Output
Hi-Z
P54
P54/SOUT11/AIN1_1
P55
P55/SIN11/BIN1_1/ADTRG0
P56
P56/SCK11/ZIN1_1/FRCK0
P57
P57
Input enabled
when the selection of interrupt
Output
Last state Last state
function is
Hi-Z/Input
maintained maintained
enabled
enabled
Output
Hi-Z/Internal
input "0" fixed
Output
Hi-Z/Internal
input "0" fixed
(Continued)
DS07-16908-1E
61
MB91625 Series
Initial Value
Pin
name
Function name
P60
P60/AIN2_1
P61
P61/BIN2_1
P62
P62/ZIN2_1
INIT = "L" INIT = "H"
Period
Period
Sleep
Mode
Standby Mode
SLVL1 = 0
SLVL1 = 1
Output Hi-Z/
Internal input "0"
fixed
Output Hi-Z/
Internal input "0"
fixed
P63
Input
enabled when
the selection of
interrupt
function is
enabled
P63/FRCK1_1/INT22_2
P64
P64/AIN3_1
P65
P65/BIN3_1/ADTRG0_1
P66
P66/ZIN3_1/FRCK0_1
Output
Hi-Z
Output HiZ/Input
enabled
Last state
maintained or
Input
enabled
Last state
maintained
Output Hi-Z/
Internal input "0"
fixed
Output Hi-Z/
Internal input "0"
fixed
P67
P67/INT23_2
P70
P70/AN0/OUT0_1/INT16
P71
P71/AN1/OUT1_1/INT17
P72
P72/AN2/TMO0/OUT2_1/INT18
P73
P73/AN3/TMO1/OUT3_1/INT19
P74
P74/AN4/TMO2/OUT4_1/INT20
P75
P75/AN5/SOUT0/TMI0/OUT5_1/
INT21
P76
P76/AN6/SIN0/TMI1/OUT6_1/
INT22
P77
P77/AN7/SCK0/TMI2/OUT7_1/
INT23
Input
enabled when
the selection of
interrupt
function is
enabled
Output Hi-Z/
Internal input "0"
fixed
Output
Hi-Z
Output
Last state Last state
Hi-Z/Input
maintained maintained
disabled
Input
enabled when
the selection of
interrupt
function is
enabled
(Continued)
62
DS07-16908-1E
MB91625 Series
(Continued)
Initial Value
Pin
name
Function name
P80
P80/AN8/IN0_1/INT24
P81
P81/AN9/IN1_1/INT25
P82
P82/AN10/IN2_1/INT26
P83
P83/AN11/IN3_1/INT27
P84
P84/AN12/IN4_1/INT28
P85
P85/AN13/IN5_1/INT29
P86
P86/AN14/IN6_1/INT30
P87
P87/AN15/IN7_1/INT31
P90
P90/DA0
P91
P91/DA1
P92
P92
PA0
PA0/INT16_1
PA1
PA1/INT17_1
PA2
PA2/TMO0_1/INT18_1
PA3
PA3/TMO1_1/INT19_1
PA4
PA4/TMO2_1/INT20_1
PA5
PA5/TMI0_1/INT21_1
PA6
PA6/TMI1_1/INT22_1
PA7
PA7/TMI2_1/INT23_1
PK0
PK0
PK1
PK1
PK2
PK2/ADTRG0_2
DS07-16908-1E
INIT = "L" INIT = "H"
Period
Period
Sleep
Mode
Standby Mode
SLVL1 = 0
SLVL1 = 1
Output Hi-Z/
Internal input "0"
fixed
Output
Hi-Z
Output
Last state Last state
Hi-Z/Input
maintained maintained
disabled
Output
Hi-Z
Output Hi-Z/
Output
Last state Last state
Internal input "0"
Hi-Z/Input
maintained maintained
fixed
enabled
Input
enabled when
the selection of
interrupt
function is
enabled
Output Hi-Z/
Internal input "0"
fixed
Output
Hi-Z
Output
Hi-Z
Output
Last state Last state
Hi-Z/Input
maintained maintained
disabled
Internal input "0"
fixed
Output
Hi-Z/Input enabled
Input
enabled when
the selection of
interrupt
function is
enabled
Output Hi-Z/
Last state Last state
Internal input "0"
maintained maintained
fixed
63
MB91625 Series
• List of pin status (serial write mode)
Pin
name
Function name
During
initialization
During
asynchronous write
operation
INIT = "L"
During
synchronous write
operation
INIT = "H"
INIT
INIT
⎯
⎯
⎯
X0
X0
Input enabled
Input enabled
Input enabled
X1
X1
Input enabled
Input enabled
Input enabled
X0A
X0A (When INIT input, see PK1.
When port selected, input
disabled)
Input disabled
Input disabled
Input disabled
X1A
X1A (When INIT input, see PK0.
When port selected, input
disabled)
Input disabled
Input disabled
Input disabled
MD0
MD0
Input enabled
Input enabled
Input enabled
MD1
MD1
Input enabled
Input enabled
Input enabled
P00
P00/TIOA0/SOUT0_1/IN0
P01
P01/TIOB0/SIN0_1/IN1
P02
P02/TIOA1/SCK0_1/IN2
P03
P03/TIOB1/IN3
P04
P04/TIOA2/SOUT1/IN4
Output
Hi-Z
Output
Hi-Z/Input enabled
Output
Hi-Z/Input enabled
P05
P05/TIOB2/SIN1/IN5
P06
P06/TIOA3/SCK1/IN6
P07
P07/TIOB3/IN7
P10
P10/TIOA4/SOUT2/AIN0/INT0
P11
P11/TIOB4/SIN2/BIN0/INT1
P12
P12/TIOA5/SCK2/ZIN0/INT2
P13
P13/TIOB5/INT3
P14
P14/TIOA6/SOUT3/AIN1/INT4
Output
Hi-Z
Output
Hi-Z/Input enabled
Output
Hi-Z/Input enabled
P15
P15/TIOB6/SIN3/BIN1/INT5
P16
P16/TIOA7/SCK3/ZIN1/INT6
P17
P17/TIOB7/INT7
(Continued)
64
DS07-16908-1E
MB91625 Series
Pin
name
Function name
During
initialization
INIT = "L"
P20
P20/TIOA8/SOUT4/AIN2
P21
P21/TIOB8/SIN4/BIN2
P22
P22/TIOA9/SCK4/ZIN2
P23
P23/TIOB9
P24
P24/TIOA10/SOUT5/AIN3/OUT0
P25
P25/TIOB10/SIN5/BIN3/OUT1
P26
P26/TIOA11/SCK5/ZIN3/OUT2
P27
P27/TIOB11/OUT3
P30
P30/TIOA12/SOUT6/INT8
P31
P31/TIOB12/SIN6/INT9
P32
P32/TIOA13/SCK6/INT10
P33
P33/TIOB13/INT11
P34
P34/TIOA14/SOUT7/OUT4/
INT12
P35
P35/TIOB14/SIN7/OUT5/INT13
P36
P36/TIOA15/SCK7/OUT6/INT14
P37
P37/TIOB15/OUT7/INT15
P40
P40/SOUT8
P41
P41/SIN8
P42
P42/SCK8
P43
P43
P44
P44/SOUT9
P45
P45/SIN9
P46
P46/SCK9
P47
P47
P50
P50/SOUT10/AIN0_1
P51
P51/SIN10/BIN0_1
P52
P52/SCK10/ZIN0_1
P53
P53/FRCK1/INT21_2
P54
P54/SOUT11/AIN1_1
P55
P55/SIN11/BIN1_1/ADTRG0
P56
P56/SCK11/ZIN1_1/FRCK0
P57
P57
During
asynchronous write
operation
During
synchronous write
operation
INIT = "H"
Output
Hi-Z
Output
Hi-Z/Input enabled
Output
Hi-Z/Input enabled
Output
Hi-Z
Output
Hi-Z/Input enabled
Output
Hi-Z/Input enabled
Output
Hi-Z
Output
Hi-Z/Input enabled
Output
Hi-Z/Input enabled
Output
Hi-Z
Output
Hi-Z/Input enabled
Output
Hi-Z/Input enabled
(Continued)
DS07-16908-1E
65
MB91625 Series
Pin
name
Function name
During
initialization
During
asynchronous write
operation
INIT = "L"
P60
P60/AIN2_1
P61
P61/BIN2_1
P62
P62/ZIN2_1
P63
P63/FRCK1_1/INT22_2
P64
P64/AIN3_1
P65
P65/BIN3_1/ADTRG0_1
P66
P66/ZIN3_1/FRCK0_1
P67
P67/INT23_2
P70
P70/AN0/OUT0_1/INT16
P71
P71/AN1/OUT1_1/INT17
P72
P72/AN2/TMO0/OUT2_1/INT18
P73
P73/AN3/TMO1/OUT3_1/INT19
P74
P74/AN4/TMO2/OUT4_1/INT20
P75
P75/AN5/SOUT0/TMI0/OUT5_1/
Output
INT21
Hi-Z/Input enabled
P76
P76/AN6/SIN0/TMI1/OUT6_1/
INT22
P77
P77/AN7/SCK0/TMI2/OUT7_1/
INT23
P80
P80/AN8/IN0_1/INT24
P81
P81/AN9/IN1_1/INT25
P82
P82/AN10/IN2_1/INT26
P83
P83/AN11/IN3_1/INT27
P84
P84/AN12/IN4_1/INT28
P85
P85/AN13/IN5_1/INT29
P86
P86/AN14/IN6_1/INT30
P87
P87/AN15/IN7_1/INT31
P90
P90/DA0
P91
P91/DA1
P92
P92
During
synchronous write
operation
INIT = "H"
Output
Hi-Z
Output
Hi-Z/Input enabled
Output
Hi-Z/Input enabled
Output
Hi-Z
Output
Hi-Z/Input disabled
Output
Hi-Z/Input disabled
Output
Output
Output Hi-Z/
Input enabled
Output Hi-Z/
Input enabled
Output Hi-Z/
Input disabled
Output Hi-Z/
Input disabled
Output
Hi-Z
Output
Hi-Z/Input disabled
Output
Hi-Z/Input disabled
Output
Hi-Z
Output
Hi-Z/Input enabled
Output
Hi-Z/Input enabled
Output
Hi-Z
(Continued)
66
DS07-16908-1E
MB91625 Series
(Continued)
Pin
name
Function name
During
initialization
INIT = "L"
PA0
PA0/INT16_1
PA1
PA1/INT17_1
PA2
PA2/TMO0_1/INT18_1
PA3
PA3/TMO1_1/INT19_1
PA4
PA4/TMO2_1/INT20_1
PA5
PA5/TMI0_1/INT21_1
PA6
PA6/TMI1_1/INT22_1
PA7
PA7/TMI2_1/INT23_1
PK0
PK0
PK1
PK1
PK2
PK2/ADTRG0_2
DS07-16908-1E
Output
Hi-Z
Output
Hi-Z
During
asynchronous write
operation
During
synchronous write
operation
INIT = "H"
Output
Hi-Z/Input disabled
Output
Hi-Z/Input disabled
Output
Hi-Z/Input disabled
Output
Hi-Z/Input disabled
Output
Hi-Z/Input enabled
Output
Hi-Z/Input enabled
67
MB91625 Series
■ ELECTRICAL CHARACTERISTICS
1. Absolute Maximum Ratings
Parameter
Symbol
Power supply voltage*1, *2
Analog power supply voltage*1, *3
1
3
Analog reference voltage* , *
Rating
Unit
Remarks
Min
Max
VCC
Vss − 0.3
Vss + 4.0
V
AVCC
Vss − 0.3
Vss + 4.0
V
AVRH
Vss − 0.3
Vss + 4.0
V
Vss − 0.3
Vcc + 0.3( ≤ 4.0)
V
*7
Vss − 0.3
Vss + 6.0
V
5 V tolerant
Input voltage*1
VI
Analog pin input voltage*1
VIA
Vss − 0.3
Vss + 4.0
V
Output voltage*1
VO
Vss − 0.3
Vcc + 0.3
V
ICLAMP
−4
+4
mA
*8
Σ|ICLAMP|
⎯
40
mA
*8
IOL
⎯
10
mA
“L” level average output current*5
IOLAV
⎯
4
mA
“L” level total maximum
output current
ΣIOL
⎯
100
mA
ΣIOLAV
⎯
50
mA
“H” level maximum output current*
IOH
⎯
− 10
mA
“H” level average output current*5
IOHAV
⎯
−4
mA
“H” level total maximum output
current
ΣIOH
⎯
− 100
mA
ΣIOHAV
⎯
− 50
mA
Power consumption
PD
⎯
500
mW
Operating temperature
Ta
− 40
+ 85
°C
TSTG
− 55
+ 125
°C
Maximum clamp current
Total maximum clamp current
“L” level maximum output current*4
“L” level total average output current*6
4
“H” level total average output current*6
Storage temperature
*1 : The parameter is based on VSS = AVSS = 0.0 V.
*2 : VCC must not drop below VSS − 0.3 V.
*3 : Be careful not to exceed VCC + 0.3 V, for example, when the power is turned on.
*4 : The maximum output current is the peak value for a single pin.
*5 : The average output is the average current for a single pin over a period of 100 ms.
*6 : The total average output current is the average current for all pins over a period of 100 ms.
*7 : If the input current or the maximum input current are limited by some means with external components, the
ICLAMP rating supersedes the VI rating.
(Continued)
68
DS07-16908-1E
MB91625 Series
(Continued)
*8 : • Corresponding pins:P14 to P17,P50 to P57, P60 to P62, P67, PK2
• Use within recommended operating conditions.
• Use at DC voltage (current).
• The +B signal should always be applied by connecting a limiting resistor between the +B signal and the
microcontroller.
• The value of the limiting resistor should be set so that the current input to the microcontroller pin does not
exceed rated values at any time regardless of instantaneously or constantly when the +B signal is input.
• Note that when the microcontroller drive current is low, such as in the low power consumption modes, the
+B input potential can increase the potential at the VCC pin via a protective diode, possibly affecting other
devices.
• Note that if the +B signal is input when the microcontroller is off (not fixed at 0V), since the power is supplied
through the pin, the microcontroller may operate incompletely.
• Do not leave +B input pins open.
• Sample recommended circuit
•Input/output equivalent circuit
Protective diode
Vcc
Limiting ICLAMP
resistor
+B input (0 V to 16 V)
P-ch
N-ch
R
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
DS07-16908-1E
69
MB91625 Series
2. Recommended Operating Conditions
(VSS = AVSS = 0.0 V)
Parameter
Symbol
Value
Unit
Min
Max
VCC
2.7
3.6
V
Analog power supply voltage
AVCC
2.7
3.6
V
Analog reference voltage
AVRH
AVSS
AVCC
V
Ta
− 40
+ 85
°C
Power supply voltage
Operating temperature
Remarks
AVCC ≤ VCC
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
semiconductor device. All of the device’s electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
representatives beforehand.
70
DS07-16908-1E
MB91625 Series
3. DC Characteristics
(VCC = AVCC = 2.7 V to 3.6 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
Parameter
Power supply
current
(Flash
product)
“H” level input
voltage
(hysteresis
input)
“L”level input
voltage
(hysteresis
input)
Symbol
Pin name
Conditions
Value
Min
Typ
Max
Unit
Remarks
CPU: 60MHz
Peripheral: 30 MHz*1,*3
ICC
Normal
operation
⎯
65
75
mA
ICCS
SLEEP mode
⎯
30
40
mA Peripheral: 30 MHz*1,*3
Sub
operation
⎯
200
650
μA
CPU: 32 kHz
Peripheral: 32 kHz
*1,*2,*4
ICCT
Watch mode
⎯
100
550
μA
*1,*2,*4
ICCH
STOP mode
⎯
70
500
μA
*1,*2
P00 to P07,
P10 to P17,
P50 to P57, P60,
P61 to P67,
P70 to P77,
P80 to P87,
P90 to P92,
PA0 to PA7,
PK0 to PK2, INIT,
MD0, MD1
⎯
VCC × 0.8
⎯
VCC + 0.3
V
P20 to P27,
P30 to P37,
P40 to P47
⎯
VCC × 0.8
⎯
VSS + 5.5
V
P00 to P07,
P10 to P17,
P20 to P27,
P30 to P37,
P40 to P47,
P50 to P57, P60,
P61 to P67,
P70 to P77,
P80 to P87,
P90 to P92,
PA0 to PA7,
PK0 to PK2, INIT,
MD0, MD1
⎯
Vss − 0.3
⎯
VCC × 0.2
V
ICCL
VIHS
VILS
VCC
5 V tolerant
(Continued)
DS07-16908-1E
71
MB91625 Series
(Continued)
Parameter
Symbol
“H” level
output voltage
VOH
“L” level
output voltage
VOL
(VCC = AVCC = 2.7 V to 3.6 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
Value
Pin name
Conditions
Unit
Remarks
Min
Typ
Max
P00 to P07,
P10 to P17,
P20 to P27,
P30 to P37,
P40 to P47,
P50 to P57,
P60 to P67,
P70 to P77,
P80 to P87,
P90 to P92,
PA0 to PA7,
PK0 to PK2
VCC = 2.7 V
VCC − 0.5
IOH = − 4 mA
VCC = 2.7 V
IOL = 4 mA
⎯
VCC
V
VSS
⎯
0.4
V
−5
⎯
+5
μA
Digital pin
− 10
⎯
+ 10
μA
Analog pin
Input leak current
IIL
⎯
⎯
Pull-up
resistance value
RPU
Pull-up pin
⎯
16.6
33
66
kΩ
Input capacitance
CIN
Other than
VCC, VSS, AVCC,
AVSS, AVRH
⎯
⎯
10
15
pF
*1 : When opened, all ports are fixed to output
*2 : Ta = + 25 °C and VCC = 3.3 V
*3 : X0 = 15 MHz, CPU clock = 60 MHz and X0A = when stopped
*4 : X0 = STOP and X0A = 32 kHz
•V-I characteristics
Conditions
Min : Process = Slow, Ta = + 85 °C, VCC = 2.7 V
Typ : Process = Typical, Ta = + 25 °C, VCC = 3.3 V
Max : Process = Fast, Ta = − 40 °C, VCC = 3.6 V
VOL - IOL
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
IOL [mA]
IOH [mA]
VOH - IOH
Typ
Max
Min
-0.5
-0.4
-0.3
-0.2
VOH-VCC [V]
72
-0.1
0
20
18
16
14
12
10
8
6
4
2
0
Typ
Max
Min
0
0.1
0.2
0.3
0.4
0.5
VOL [V]
DS07-16908-1E
MB91625 Series
4. AC Characteristics
(1) Main Clock (MCLK) Input Standard
(VCC = AVCC = 2.7 V to 3.6 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
Parameter
Input frequency
Input clock cycle
Symbol
Pin
name
Conditions
Value
Unit
Remarks
48
MHz
When crystal oscillator is connected
4
48
MHz
When using external
clock
⎯
20.83
250
ns
When using external
clock
Min
Max
⎯
4
⎯
FCH
tCYLH
X0, X1
Input clock pulse width
⎯
PWH/tCYLH
PWL/tCYLH
45
55
%
When using external
clock
Input clock rise time
and fall time
tCF
tCR
⎯
⎯
5
ns
When using external
clock
Internal operating
clock frequency
Internal operating
clock cycle time
DS07-16908-1E
FCS
⎯
⎯
⎯
60
MHz Source clock
FCC
⎯
⎯
⎯
60
MHz CPU clock
FCP
⎯
⎯
⎯
40
MHz Peripheral bus clock
tCYCS
⎯
⎯
16.7
⎯
ns
Source clock
tCYCC
⎯
⎯
16.7
⎯
ns
CPU clock
tCYCP
⎯
⎯
25
⎯
ns
Peripheral bus clock
73
MB91625 Series
• Operation guaranteed range
Power supply voltage VCC (V)
• When the main clock is selected (DIVB = 000)
3.6
3.3
3.0
2.7
2.4
0
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
Internal operation clock FCC (MHz)
• When the PLL clock is selected
Power supply voltage VCC (V)
*1
*2
3.6
3.3
3.0
2.7
2.4
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60
Internal operation clock FCC (MHz)
*1 : DIVB = 111, ODS = 11, and PLL macro oscillation frequency = 30 MHz
*2 : DIVB = 000, ODS = 01, and PLL macro oscillation frequency = 60 MHz
• When the sub clock is selected (FCL = 32.768 kHz)
Power supply voltage VCC (V)
DIVB=111
DIVB=000
DIVB=110 DIVB=101 DIVB=100 DIVB=011 DIVB=010 DIVB=001
3.6
3.3
3.0
2.7
2.4
0
4
8
12
16
20
24
28
32
Internal operation clock FCC (kHz)
74
DS07-16908-1E
MB91625 Series
• Example of configuration
Internal operation clock
FCC (MHz)
• When the main clock is selected (DIVB = 000*1)
24
22
20
18
16
14
12
10
8
6
4
2
0
0
4
8
12
16
20
24
28
32
36
40
44
48
X0 input frequency (MHz)
• When the PLL clock is selected (DIVB = 000*1, PDS = 0000*2)
Internal operation clock
FCC (MHz)
PMS=1110
60
50
40
30
20
10
0
PMS=1101 to 0010
PMS=0001
PMS=0000
ODS=00
ODS=01
ODS=10
ODS=11
0
4
8
12
16
20
24
28
32
36
40
44
48
X0 input frequency (MHz)
• When the PLL clock is selected (DIVB = 000*1, PDS = 0001*2)
Internal operation clock
FCC (MHz)
PMS=1110
PMS=1101 to 0001
PMS=0000
60
50
ODS=00
40
30
ODS=01
20
ODS=10
ODS=11
10
0
0
4
8
12
16
20
24
28
32
36
40
44
48
X0 input frequency (MHz)
*1 : The values other than DIVB = 000 are omitted.
*2 : The values other than PDS = 0000 and 0001 are omitted.
Note: DIVB
ODS
PDS
PMS
:Base clock division configuration bit
:PLL macro oscillation clock division rate select bit
:PLL input clock division select bit
:PLL clock multiple rate select bit
DS07-16908-1E
75
MB91625 Series
(2) Sub Clock (SBCLK) Input Standard
(VCC = AVCC = 2.7 V to 3.6 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
Parameter
Symbol
Input frequency
Value
Pin name Conditions
Unit
Typ
Max
⎯
⎯
32.768
⎯
kHz
When crystal
oscillator is
connected
⎯
⎯
32.768
⎯
kHz
When using
external clock
⎯
⎯
30.518
⎯
μs
When using
external clock
FCL
X0A, X1A
Remarks
Min
Input clock cycle
tCYLL
Input clock pulse
width
⎯
PWH/tCYLL
PWL/tCYLL
45
⎯
55
%
When using
external clock
Input clock rise time
and fall time
tCF
tCR
⎯
⎯
⎯
200
ns
When using
external clock
<When external clock input>
tCYLH, tCYLL
0.8 × VCC
0.8 × VCC
X0
X0A
0.8 × VCC
0.2 × VCC
PWH
0.2 × VCC
PWL
tCF
tCR
(3) Conditions of PLL
(VCC = AVCC = 2.7 V to 3.6 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
Parameter
Symbol
Conditions
PLL oscillation
stabilization wait time
(LOCK UP time)
tLOCK
PLL input clock
frequency
PLL multiple rate
PLL macro oscillation
clock frequency
Value
Unit
Remarks
⎯
μs
Time from when the PLL
starts operating until the
oscillation stabilizes
⎯
24
MHz
2
⎯
15
Multiplied
by
30
⎯
60
MHz
Min
Typ
Max
⎯
600
⎯
fPLLI
⎯
4
⎯
⎯
fPLLO
⎯
(4) Regulator Voltage Stabilization Wait Time
(VCC = AVCC = 2.7 V to 3.6 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
Parameter
Regulator voltage
stabilization wait time
Symbol
Conditions
tREG
⎯
Value
Min
Max
50
⎯
Unit
Remarks
μs
Time taken for the regulator
voltage to stabilize
Note : This is the time from when the external power supply stabilizes (after reaching 2.7 V).
76
DS07-16908-1E
MB91625 Series
(5) Reset Input Standards
(VCC = AVCC = 2.7 V to 3.6 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
Parameter
Reset input time
(At power-on, main oscillation
stop mode)
Symbol Pin name
tINITX
Reset input rise time and fall
time
Unit
Min
Max
Oscillation time of
oscillator + 10 tCYLH
⎯
ns
10 tCYLH
⎯
ns
⎯
10
ms
⎯
INIT
Reset input time
(At other times)
Value
Conditions
tINITXF
tINITXR
Remarks
*
* : After the supply voltage has stabilized, it takes a further 50 μs until the internal supply stabilizes. Hold the input
to the INIT pin during that period.
• At power-on
• When in stop mode
• When in sub mode and sub watch mode when the main oscillation is stopped.
tINITX
VIHS
VIHS
INIT
VILS
tINITXF
DS07-16908-1E
VILS
tINITXR
77
MB91625 Series
(6) Base Timer Input Timing
• Timer input timing
Parameter
Input pulse width
(VCC = AVCC = 2.7 V to 3.6 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
Symbol
Pin name
Conditions
tTIWH
tTIWL
TIOAn / TIOBn
(When used as ECK, TIN)
⎯
tTIWH
ECK
VIHS
Parameter
Input pulse width
VILS
2 tCYCP
⎯
Unit
ns
VILS
(VCC = AVCC = 2.7 V to 3.6 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
Symbol
Pin name
Conditions
tTRGH
tTRGL
TIOAn / TIOBn
(When used as TGIN)
⎯
VIHS
78
Max
VIHS
tTRGH
TGIN
Min
tTIWL
TIN
• Trigger Input Timing
Value
Value
Min
Max
2 tCYCP
⎯
Unit
ns
tTRGL
VIHS
VILS
VILS
DS07-16908-1E
MB91625 Series
(7) Synchronous serial (CSIO) timing
(VCC = AVCC = 2.7 V to 3.6 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
• Synchronous serial (SPI = 0, SCINV = 0)
Parameter
Symbol
Pin name
Serial clock cycle time
tSCYC
SCKn
SCK ↓ → SOUT delay time
tSLOVI
SCKn
SOUTn
Value
Conditions
Unit
Min
Max
4tCYCP
⎯
ns
− 30
+ 30
ns
45
⎯
ns
Internal shift clock
operation
SIN → SCK ↑ setup time
tIVSHI
SCKn
SINn
SCK ↑ → SIN hold time
tSHIXI
SCKn
SINn
0
⎯
ns
Serial clock “L” pulse width
tSLSH
SCKn
2tCYCP − 10
⎯
ns
Serial clock “H” pulse width
tSHSL
SCKn
tCYCP + 10
⎯
ns
SCK ↓ → SOUT delay time
tSLOVE
SCKn
SOUTn
⎯
40
ns
SIN → SCK↑ setup time
tIVSHE
SCKn
SINn
15
⎯
ns
SCK ↑ → SIN hold time
tSHIXE
SCKn
SINn
20
⎯
ns
SCK fall time
tF
SCKn
⎯
⎯
5
ns
SCK rise time
tR
SCKn
⎯
⎯
5
ns
External shift clock
operation
Notes: • The above standards apply to CLK synchronous mode.
• tCYCP indicates the peripheral clock cycle time.
• When the external load capacitance C = 50pF.
tSCYC
VOH
SCK
VOL
VOL
tSLOVI
VOH
SOUT
VOL
tIVSHI
tSHIXI
VIHS
VIHS
VILS
VILS
SIN
MS bit = 0
DS07-16908-1E
79
MB91625 Series
tSLSH
tSHSL
VIHS
SCK
tF
VIHS
VILS
VILS
VIHS
tR
tSLOVE
VOH
SOUT
VOL
tIVSHE
tSHIXE
VIHS
VIHS
VILS
VILS
SIN
MS bit = 1
• Synchronous serial (SPI = 0, SCINV = 1)
Symbol
Pin name
Serial clock cycle time
tSCYC
SCK ↑→ SOUT delay time
Parameter
Conditions
Value
Unit
Min
Max
SCKn
4tCYCP
⎯
ns
tSHOVI
SCKn
SOUTn
− 30
+ 30
ns
SIN → SCK↓ setup time
tIVSLI
SCKn
SINn
45
⎯
ns
SCK ↓ → SIN hold time
tSLIXI
SCKn
SINn
0
⎯
ns
Serial clock “L” pulse width
tSLSH
SCKn
2tCYCP − 10
⎯
ns
Serial clock “H” pulse width
tSHSL
SCKn
tCYCP + 10
⎯
ns
SCK ↑ → SOUT delay time
tSHOVE
SCKn
SOUTn
⎯
40
ns
SIN → SCK↓ setup time
tIVSLE
SCKn
SINn
15
⎯
ns
SCK ↓ → SIN hold time
tSLIXE
SCKn
SINn
20
⎯
ns
SCK fall time
tF
SCKn
⎯
5
ns
SCK rise time
tR
SCKn
⎯
5
ns
Internal shift clock
operation
External shift clock
operation
Notes: • The above standards apply to CLK synchronous mode.
• tCYCP indicates the peripheral clock cycle time.
• When the external load capacitance C = 50pF.
80
DS07-16908-1E
MB91625 Series
tSCYC
VOH
VOH
VOL
SCK
tSHOVI
VOH
SOUT
VOL
tIVSLI
SIN
tSLIXI
VIHS
VIHS
VILS
VILS
MS bit = 0
tSHSL
VIHS
SCK
tSLSH
VIHS
VILS
VILS
VILS
tF
tR
tSHOVE
VOH
SOUT
VOL
tIVSLE
SIN
tSLIXE
VIHS
VIHS
VILS
VILS
MS bit = 1
DS07-16908-1E
81
MB91625 Series
• Synchronous serial (SPI = 1,SCINV = 0)
Parameter
Symbol
Pin name
Serial clock cycle time
tSCYC
SCK ↑→ SOUT delay time
Value
Conditions
Unit
Min
Max
SCKn
4tcycp
⎯
ns
tSHOVI
SCKn
SOUTn
− 30
+ 30
ns
SIN → SCK↓ setup time
tIVSLI
SCKn
SINn
45
⎯
ns
SCK ↓ → SIN hold time
tSLIXI
SCKn
SINn
0
⎯
ns
SOUT → SCK ↓ delay time
tSOVLI
SCKn
SOUTn
2tcycp − 30
⎯
ns
Serial clock “L” pulse width
tSLSH
SCKn
2tcycp − 10
⎯
ns
Serial clock “H” pulse width
tSHSL
SCKn
tcycp + 10
⎯
ns
SCK ↑ → SOUT delay time
tSHOVE
SCKn
SOUTn
⎯
40
ns
SIN → SCK↓ setup time
tIVSLE
SCKn
SINn
15
⎯
ns
SCK ↓ → SIN hold time
tSLIXE
SCKn
SINn
20
⎯
ns
SCK fall time
tF
SCKn
⎯
5
ns
SCK rise time
tR
SCKn
⎯
5
ns
Internal shift clock
operation
External shift clock
operation
Notes: • The above standards apply to CLK synchronous mode.
• tCYCP indicates the peripheral clock cycle time.
• When the external load capacitance C = 50pF.
tSCYC
VOH
SCK
VOL
VOL
tSHOVI
tSOVLI
SOUT
VOH
VOL
VOH
VOL
tIVSLI
SIN
tSLIXI
VIHS
VILS
VIHS
VILS
MS bit = 0
82
DS07-16908-1E
MB91625 Series
tSHSL
tSLSH
VIHS
SCK
VILS
tSHOVE
tR
VOH
VOL
VOH
VOL
tIVSLE
SIN
VIHS
VILS
tF
*
SOUT
VIHS
VILS
tSLIXE
VIHS
VILS
VIHS
VILS
MS bit = 1
* : Changes when written to TDR register
• Synchronous serial (SPI = 1, SCINV = 1)
Symbol
Pin name
Serial clock cycle time
tSCYC
SCK ↓ → SOUT delay time
Parameter
Conditions
Value
Unit
Min
Max
SCKn
4tcycp
⎯
ns
tSLOVI
SCKn
SOUTn
− 30
+ 30
ns
SIN → SCK ↑ setup time
tIVSHI
SCKn
SINn
45
⎯
ns
SCK ↑→ SIN hold time
tSHIXI
SCKn
SINn
0
⎯
ns
SOUT → SCK ↑ delay time
tSOVHI
SCKn
SOUTn
2tcycp − 30
⎯
ns
Serial clock “L” pulse width
tSLSH
SCKn
2tcycp − 10
⎯
ns
Serial clock “H” pulse width
tSHSL
SCKn
tcycp + 10
⎯
ns
SCK ↓ → SOUT delay time
tSLOVE
SCKn
SOUTn
⎯
40
ns
SIN → SCK ↑ setup time
tIVSHE
SCKn
SINn
15
⎯
ns
SCK ↑ → SIN hold time
tSHIXE
SCKn
SINn
20
⎯
ns
SCK fall time
tF
SCKn
⎯
5
ns
SCK rise time
tR
SCKn
⎯
5
ns
Internal shift clock
operation
External shift clock
operation
Notes: • The above standards apply to CLK synchronous mode.
• tCYCP indicates the peripheral clock cycle time.
• When the external load capacitance C = 50pF.
DS07-16908-1E
83
MB91625 Series
tSCYC
VOH
SCK
VOH
VOL
tSLOVI
tSOVHI
VOH
VOL
VOH
VOL
SOUT
tIVSHI
tSHIXI
VIHS
VILS
SIN
VIHS
VILS
MS bit = 0
tSHSL
tR
VIHS
SCK
tSLSH
VIHS
VILS
tSLOVE
VILS
VIHS
VILS
VOH
VOL
VOH
VOL
SOUT
tIVSHE
tSHIXE
VIHS
VILS
SIN
tF
VIHS
VILS
MS bit = 1
• External clock (EXT = 1) : asynchronous only
Parameter
Symbol
Serial clock “L” pulse width
tSLSH
Serial clock “H” pulse width
tSHSL
SCK fall time
tF
SCK rise time
tR
CL = 50 pF
tSHSL
tR
SCK
VIHS
VILS
84
Conditions
Value
Max
tcycp + 10
⎯
ns
tcycp + 10
⎯
ns
⎯
5
ns
⎯
5
ns
tSLSH
VIHS
VILS
Unit
Min
tF
VIHS
VILS
DS07-16908-1E
MB91625 Series
(8)
Free-run Timer Clock, Reload Timer Event Input, Up/down Counter Input, Input Capture Input, Interrupt
Input Timing
(VCC = AVCC = 2.7 V to 3.6 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
Parameter
Symbol
tTIWH
tTIWL
Input pulse width
Value
Pin name
Conditions
Min
Max
FRCKn
TMIn
INn
AINn
BINn
ZINn
⎯
2 tCYCP
⎯
ns
*1
⎯
3 tCYCP
⎯
ns
*1
⎯
1.0
⎯
μs
*2
INTn
Unit
Remarks
*1 : tCYCP indicates peripheral clock cycle time, except when in stop mode, in main timer mode and in watch mode.
*2 : When in stop mode, in main timer mode, or in watch mode.
FRCKn
TMIn
INn
AINn
BINn
ZINn
INTn
tTIWH
tTIWL
VIHS
VILS
VIHS
VILS
(9) A/D Converter Trigger Input Timing
(VCC = AVCC = 2.7 V to 3.6 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
Value
Parameter
Symbol
Pin name
Conditions
Min
Max
A/D converter trigger
input
tTADTGL
tTADTGH
ADTRGn
⎯
2 tCYCP
⎯
Unit
ns
Remarks
*
* : tCYCP indicates peripheral clock cycle time.
tTADTGL
tTADTGH
ADTRGn
VIHS
VILS
DS07-16908-1E
VIHS
VILS
85
MB91625 Series
(10) I2C Timing
(VCC = AVCC = 2.7 V to 3.6 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
Parameter
Symbol
Pin name
SCL clock frequency
fSCL
“(Repeated) START
condition” hold time
SDA ↓ → SCL ↓
Condition
Typical mode
High-speed mode
Unit
Min
Max
Min
Max
SCKn
(SCLn)
0
100
0
400
kHz
tHDSTA
SOUTn
(SDAn)
SCKn
(SCLn)
4.0
⎯
0.6
⎯
μs
SCL clock “L” width
tLOW
SCKn
(SCLn)
4.7
⎯
1.3
⎯
μs
SCL clock “H” width
tHIGH
SCKn
(SCLn)
4.0
⎯
0.6
⎯
μs
“Repeated START
condition” setup time
SCL ↑→ SDA ↓
tSUSTA
SCKn
(SCLn)
4.7
⎯
0.6
⎯
μs
tHDDAT
SOUTn
(SDAn)
SCKn
(SCLn)
0
3.45*2
0
0.9*3
μs
tSUDAT
SOUTn
(SDAn)
SCKn
(SCLn)
250
⎯
100
⎯
ns
“STOP condition”
setup time
SCL↑→ SDA↑
tSUSTO
SOUTn
(SDAn)
SCKn
(SCLn)
4.0
⎯
0.6
⎯
μs
Bus free time
between “STOP
condition” and
“START condition”
tBUF
⎯
4.7
⎯
1.3
⎯
μs
Noise filter
tSP
⎯
2tCYCP*4
⎯
2tCYCP*4
⎯
ns
Data hold time
SCL ↓ → SDA ↓ ↑
Data setup time
SDA ↓ ↑→ SCL↑
CL = 50 pF
R = (Vp/IOL)*1
⎯
*1 : R and C represent the pull-up resistance and load capacitance of the SCL and SDA lines, respectively. Vp
indicates the power supply voltage of the pull-up resistance and IOL indicates VOL guaranteed current.
*2 : The maximum tHDDAT must satisfy that it doesn't extend at least “L” period (tLOW) of device's SCL signal.
*3 : A high-speed mode I2C bus device can be used on a standard mode I2C bus system as long as the device
satisfies the requirement of “tSUDAT ≥ 250 ns”.
*4 : tCYCP is the peripheral clock cycle time. To use I2C, set the peripheral bus clock at 8 MHz or more.
86
DS07-16908-1E
MB91625 Series
SDA
tSUDAT
tLOW
tSUSTA
tBUF
SCL
tHDSTA
DS07-16908-1E
tHDDAT
tHIGH
tHDSTA
tSP
tSUSTO
87
MB91625 Series
5. Electrical Characteristics for the A/D Converter
(VCC = AVCC = 2.7 V to 3.6 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
Parameter
Pin name
Value
Min
Typ
Max
Unit
Remarks
Resolution
⎯
⎯
⎯
10
bit
Total error
⎯
− 5.0
⎯
+ 5.0
LSB
Linearity error
⎯
− 3.5
⎯
+ 3.5
LSB
Differential linearity error
⎯
−3
⎯
+3
LSB
Zero transition voltage
AN0
to
AN15
− 1.5
+ 0.5
+4
AVCC = 3.3 V,
LSB AVRH = 3.3 V
Full transition voltage
AN0
to
AN15
AVRH − 4
AVRH − 1.5
AVRH + 0.5
LSB
Compare time
⎯
0.72*3
⎯
⎯
μs
PCLK = 33 MHz
Conversion time
⎯
1.2*1
⎯
⎯
μs
PCLK = 33 MHz
⎯
⎯
3.5
When operating
mA A/D
(with D/A stopped)
⎯
⎯
11
μA
⎯
⎯
0.6
When operating
mA A/D
AVRH = 3.0 V
⎯
⎯
5
μA
Power supply current
(analog + digital)
Reference power supply
current
(between AVRH and
AVSS)
AVCC
AVRH
Analog input
capacitance
⎯
⎯
⎯
8.5
pF
Interchannel disparity
⎯
⎯
⎯
4
LSB
Analog port input current
AN0 to
AN15
⎯
⎯
10
μA
Analog input voltage
AN0 to
AN15
AVSS
⎯
AVRH
V
Reference voltage
AVRH
AVSS
⎯
AVCC
V
At power-down*2
At power-down*2
*1 : It depends on the actual external load and the clock cycle supplied to peripheral resources. Make sure to satisfy
PCLK cycle × 4 or over + below (Equation 1). The condition of minimum conversion time is the value when
PCLK = 33 MHz, sampling time: 0.424 μs, external impedance: 1.4k Ω or below, compare time: 0.72 μs.
*2 : The current when the CPU is in stop mode and the A/D converter is not operating.
*3 : Compare time = {(CT + 1) × 10 + 4} × peripheral clock (PCLK) period. (CT indicates compare time setting bits.)
The condition of the minimum compare time is when CT = 1 and PCLK = 33 MHz.
(Continued)
88
DS07-16908-1E
MB91625 Series
(Continued)
Rext
AN0 to AN15
Analog input pin
Comparator
Rin
Analog signal
source
Cin
Rin
Cin
Approx. 5.3 kΩ Approx. 8.5 pF
The output impedance of the external circuit connected to the analog input affects the sampling time of the A/D
converter. Design the output impedance of the output circuit such that the required sampling time is less than the
value of TS calculated from the following equation.
(Equation1) Ts =
Ts
Rin
Cin
Rext
(Rin + Rext) × Cin × 8
: Sampling time
: Input resistance of A/D = 5.3 kΩ
: Input capacitance of A/D = 8.5 pF
: Output impedance of external circuit
If the sampling time is set as 600 ns,
600 ns ≥ (5.3 kΩ + Rext) × 8.5 pF × 8
∴Rext ≤ 3.5 kΩ
And the impedance of the external circuit therefore needs to be 3.5 kΩ or less.
DS07-16908-1E
89
MB91625 Series
•Definition of 10-bit A/D Converter Terms
• Resolution
: Analog variation that is recognized by an A/D converter.
• Linearity error
: Deviation of the line between the zero-transition point
(0000000000←→0000000001) and the full-scale transition point
(1111111110←→1111111111) from the actual conversion characteristics.
• Differential linearity error : Deviation from the ideal value of the input voltage that is required to change the
output code by 1 LSB.
• Total error
: Difference between the actual value and the theoretical value. The total error includes
zero transition error, full-scale transition error, and linear error.
Linearity error
3FFH
Differential linearity error
Actual conversion
characteristics
Actual conversion
characteristics
(N + 1)H
3FEH
{1 LSB (N − 1) + V OT}
VFST
Ideal characteristics
(Actuallymeasured
value)
VNT
004H
(Actually-measured
value)
003H
Actual conversion
characteristics
Ideal characteristics
002H
001H
Digital output
Digital output
3FDH
NH
(N − 1)H
VNT
(N − 2)H
VOT (Actually-measured value)
AVSS
Analog input
V(N+1)T
AVRH
(Actually-measured
value)
(Actually-measured
value)
Actual conversion characteristics
AVSS
AVRH
Analog input
VNT − {1 LSB × (N − 1) + VOT}
[LSB]
1 LSB’
V (N+1) T − VNT
− 1 [LSB]
Differential linearity error of digital output N =
1 LSB
VFST − VOT
1 LSB =
1022
Linearity error of digital output N =
N
VOT
VFST
VNT
: A/D converter digital output value.
: Voltage at which the digital output changes from 000H to 001H.
: Voltage at which the digital output changes from 3FEH to 3FFH.
: Voltage at which the digital output changes from (N − 1)H to NH.
(Continued)
90
DS07-16908-1E
MB91625 Series
(Continued)
Total error
3FFH
1.5 LSB'
3FEH
Actual conversion
characteristics
3FDH
Digital output
{1 LSB' (N − 1) + 0.5 LSB'}
004H
VNT
(Actually-measured value)
Actual conversion
characteristics
003H
002H
001H
Ideal
characteristics
0.5 LSB'
AVSS
Analog input
1 LSB’ (Ideal value)
Total error of digital output N
AVRH
AVRH − AVSS
[V]
1024
VNT − {1 LSB’ × (N − 1) + 0.5 LSB’}
=
1 LSB’
=
N : A/D converter digital output value.
VNT : Voltage at which the digital output changes from (N + 1)H to NH.
VOT’ (Ideal value) = AVSS + 0.5 LSB [V]
VFST’ (Ideal value) = AVRH − 1.5 LSB [V]
DS07-16908-1E
91
MB91625 Series
6. Electrical Characteristics for the D/A Converter
(VCC = AVCC = 2.7 V to 3.6 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
Parameter
Pin name
Value
Min
Typ
Max
Unit
Remarks
Resolution
⎯
⎯
⎯
8
bit
Linearity error
⎯
− 2.0
⎯
+ 2.0
LSB
When the output is unloaded
Differential linearity
error
⎯
− 1.0
⎯
+ 1.0
LSB
When the output is unloaded
⎯
⎯
0.6
⎯
μs
When load capacitance
(CL) = 20 pF
⎯
⎯
3.0
⎯
μs
When load capacitance
(CL) = 100 pF
DA0, DA1
3.19
3.51
5.85
kΩ
Conversion time
Analog output
impedance
⎯
Analog current
300
⎯
μA
10 μs conversion, when the
output is unloaded (When 2
channels operating, A/D
stopped)
⎯
⎯
3600*
μA
When the input digital code is
fixed at 7AH or 85H (When 2
channels operating, A/D
stopped)
⎯
⎯
11
μA
At power-down (When A/D
stopped)
AVCC
* : The current consumption of the D/A converter varies with input digital code. The standard value indicates the
current consumed when the digital code that maximizes the current consumption is input.
92
DS07-16908-1E
MB91625 Series
7. Flash Memory Write/Erase Characteristics
(VCC = 3.3 V, Ta = + 25 °C)
Parameter
Value
Unit
Remarks
3.6
s
Excludes write time prior to internal erase
23
370
μs
Not including system-level overhead time.
⎯
7.2
28.8
s
Excludes write time prior to internal erase
(When equipped with 512 Kbytes)
10000
⎯
⎯
cycle
Average Ta ≤ + 85 °C
10*2
⎯
⎯
year
Average Ta ≤ + 85 °C
Min
Typ
Max
Sector erase time
⎯
0.9
Half word (16 bits) write
time
⎯
Chip erase time*1
Erase/write cycles
Flash memory
data hold time
*1: The chip erase time is the sector erase time multiplied across all sectors.
*2: This value comes from the technology qualification (using Arrhenius equation to translate high temperature
measurements into normalized value at + 85 °C) .
DS07-16908-1E
93
MB91625 Series
■ ORDERING INFORMATION
Part number
MB91F627PMC
94
Package
100-pin plastic LQFP
(FPT-100P-M20)
DS07-16908-1E
MB91625 Series
■ PACKAGE DIMENSION
100-pin plastic LQFP
Lead pitch
0.50 mm
Package width ×
package length
14.0 mm × 14.0 mm
Lead shape
Gullwing
Sealing method
Plastic mold
Mounting height
1.70 mm Max
Weight
0.65 g
Code
(Reference)
P-LFQFP100-14×14-0.50
(FPT-100P-M20)
100-pin plastic LQFP
(FPT-100P-M20)
Note 1) * : These dimensions do not include resin protrusion.
Note 2) Pins width and pins thickness include plating thickness.
Note 3) Pins width do not include tie bar cutting remainder.
16.00±0.20(.630±.008)SQ
* 14.00±0.10(.551±.004)SQ
75
51
76
50
0.08(.003)
Details of "A" part
+0.20
26
100
1
25
C
0.20±0.05
(.008±.002)
0.08(.003)
M
0.10±0.10
(.004±.004)
(Stand off)
0°~8°
"A"
0.50(.020)
+.008
1.50 –0.10 .059 –.004
(Mounting height)
INDEX
0.145±0.055
(.0057±.0022)
2005 -2008 FUJITSU MICROELECTRONICS LIMITED F100031S-c-3-3
0.50±0.20
(.020±.008)
0.60±0.15
(.024±.006)
0.25(.010)
Dimensions in mm (inches).
Note: The values in parentheses are reference values
Please confirm the latest Package dimension by following URL.
http://edevice.fujitsu.com/package/en-search/
DS07-16908-1E
95
MB91625 Series
FUJITSU MICROELECTRONICS LIMITED
Shinjuku Dai-Ichi Seimei Bldg., 7-1, Nishishinjuku 2-chome,
Shinjuku-ku, Tokyo 163-0722, Japan
Tel: +81-3-5322-3329
http://jp.fujitsu.com/fml/en/
For further information please contact:
North and South America
FUJITSU MICROELECTRONICS AMERICA, INC.
1250 E. Arques Avenue, M/S 333
Sunnyvale, CA 94085-5401, U.S.A.
Tel: +1-408-737-5600 Fax: +1-408-737-5999
http://www.fma.fujitsu.com/
Asia Pacific
FUJITSU MICROELECTRONICS ASIA PTE. LTD.
151 Lorong Chuan,
#05-08 New Tech Park 556741 Singapore
Tel : +65-6281-0770 Fax : +65-6281-0220
http://www.fmal.fujitsu.com/
Europe
FUJITSU MICROELECTRONICS EUROPE GmbH
Pittlerstrasse 47, 63225 Langen, Germany
Tel: +49-6103-690-0 Fax: +49-6103-690-122
http://emea.fujitsu.com/microelectronics/
FUJITSU MICROELECTRONICS SHANGHAI CO., LTD.
Rm. 3102, Bund Center, No.222 Yan An Road (E),
Shanghai 200002, China
Tel : +86-21-6146-3688 Fax : +86-21-6335-1605
http://cn.fujitsu.com/fmc/
Korea
FUJITSU MICROELECTRONICS KOREA LTD.
206 Kosmo Tower Building, 1002 Daechi-Dong,
Gangnam-Gu, Seoul 135-280, Republic of Korea
Tel: +82-2-3484-7100 Fax: +82-2-3484-7111
http://kr.fujitsu.com/fmk/
FUJITSU MICROELECTRONICS PACIFIC ASIA LTD.
10/F., World Commerce Centre, 11 Canton Road,
Tsimshatsui, Kowloon, Hong Kong
Tel : +852-2377-0226 Fax : +852-2376-3269
http://cn.fujitsu.com/fmc/en/
Specifications are subject to change without notice. For further information please contact each office.
All Rights Reserved.
The contents of this document are subject to change without notice.
Customers are advised to consult with sales representatives before ordering.
The information, such as descriptions of function and application circuit examples, in this document are presented solely for the purpose
of reference to show examples of operations and uses of FUJITSU MICROELECTRONICS device; FUJITSU MICROELECTRONICS
does not warrant proper operation of the device with respect to use based on such information. When you develop equipment incorporating
the device based on such information, you must assume any responsibility arising out of such use of the information.
FUJITSU MICROELECTRONICS assumes no liability for any damages whatsoever arising out of the use of the information.
Any information in this document, including descriptions of function and schematic diagrams, shall not be construed as license of the use
or exercise of any intellectual property right, such as patent right or copyright, or any other right of FUJITSU MICROELECTRONICS
or any third party or does FUJITSU MICROELECTRONICS warrant non-infringement of any third-party's intellectual property right or
other right by using such information. FUJITSU MICROELECTRONICS assumes no liability for any infringement of the intellectual
property rights or other rights of third parties which would result from the use of information contained herein.
The products described in this document are designed, developed and manufactured as contemplated for general use, including without
limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured
as contemplated (1) for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to
the public, and could lead directly to death, personal injury, severe physical damage or other loss (i.e., nuclear reaction control in nuclear
facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon
system), or (2) for use requiring extremely high reliability (i.e., submersible repeater and artificial satellite).
Please note that FUJITSU MICROELECTRONICS will not be liable against you and/or any third party for any claims or damages arising
in connection with above-mentioned uses of the products.
Any semiconductor devices have an inherent chance of failure. You must protect against injury, damage or loss from such failures by
incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current
levels and other abnormal operating conditions.
Exportation/release of any products described in this document may require necessary procedures in accordance with the regulations of
the Foreign Exchange and Foreign Trade Control Law of Japan and/or US export control laws.
The company names and brand names herein are the trademarks or registered trademarks of their respective owners.
Edited: Sales Promotion Department