RSP-150 ¡½ Features : series ry 150W Single Output with PFC Function na ¡EUniversal AC input / Full range ¡ Built-in active PFC function E ¡ Protections: Short circuit / Overload / Over voltage / Over temperature E ¡ Cooling by free air convection E ¡ Built-in constant current limiting circuit E ¡ 1U low profile 30mm E ¡ Remote ON-OFF control E ¡ LED indicator for power on E ¡ 100% full load burn-in test E ¡ 3 years warranty E SPECIFICATION MODEL RSP-150-3.3 RSP-150-5 RSP-150-7.5 RSP-150-12 RSP-150-13.5 RSP-150-15 RSP-150-24 RSP-150-27 RSP-150-48 DC VOLTAGE 3.3V 5V 7.5V 12V 13.5V 15V 24V 27V 48V RATED CURRENT 30A 30A 20A 12.5A 11.2A 10A 6.3A 5.6A 3.2A CURRENT RANGE 0 ~ 30A 0 ~ 30A 0 ~ 20A 0 ~ 12.5A 0 ~ 11.2A 0 ~ 10A 0 ~ 6.3A 0 ~ 5.6A 0 ~ 3.2A RATED POWER 99W 150W 150W 150W 151.2W 150W 151.2W 151.2W 153.6W 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p 250mVp-p RIPPLE & NOISE (max.) Note.2 100mVp-p ¡Ó2.0% ¡Ó2.0% ¡Ó2.0% ¡Ó2.0% ¡Ó2.0% ¡Ó1.0% ¡Ó1.0% ¡Ó1.0% ¡Ó0.5% ¡Ó0.5% ¡Ó0.5% ¡Ó0.5% ¡Ó0.5% ¡Ó0.5% ¡Ó0.5% ¡Ó0.5% ¡Ó0.5% LOAD REGULATION ¡Ó1.0% ¡Ó1.0% ¡Ó1.0% ¡Ó0.5% ¡Ó0.5% ¡Ó0.5% ¡Ó0.5% ¡Ó0.5% ¡Ó0.5% SETUP, RISE TIME 600ms, 30ms at full load 87.5% 88.5% 89% 89.5% 90% 16ms at full load HOLD UP TIME (Typ.) VOLTAGE RANGE Note.5 85 ~ 264VAC 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.93/230VAC EFFICIENCY (Typ.) 81.5% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.6A/115VAC 0.8A/230VAC COLD START 40A/230VAC LEAKAGE CURRENT <2mA / 240VAC OVERLOAD 105 ~ 135% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed 3.63 ~ 4.46V 5.5 ~ 6.75V 8.25 ~ 10.13V 13.2 ~ 16.2V 14.85 ~ 18.2V 16.5 ~ 20.25V 26.4 ~ 32.4V 29.7 ~ 36.45V 52.8 ~ 64.8V REMOTE CONTROL WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION 88.5% 90% Protection type : Shut down o/p voltage, re-power on to recover 100¢J ¡Ó5¢J (TSW1) detect on main power transformer for 3.3V ~ 7.5V ; 105¢J ¡Ó5¢J(TSW1) detect on main power transformer for others Protection type : Shut down o/p voltage, recovers automatically after temperature goes down CN1: < 0~0.8VDC POWER ON , 4~10VDC POWER OFF -30 ~ +70¢J (Refer to "Derating Curve") 20 ~ 90% RH non-condensing -20 ~ +85¢J, 10 ~ 95% RH ¡Ó0.05%/¢J (0 ~ 50¢J) 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1, CCC GB4943 approved; Design refer to EN60335-1 I/P-O/P:3.75KVAC I/P-FG:1.875KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25¢J/ 70% RH Pr SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 4) EMC EMISSION EMC IMMUNITY MTBF NOTE PF>0.98/115VAC at full load 87% eli OVER TEMPERATURE OTHERS 120 ~ 370VDC FREQUENCY RANGE PROTECTION OVER VOLTAGE FUNCTION 7.13 ~ 8.25V 11.4 ~ 13.2V 12.8 ~ 14.9V 14.3 ~ 16.5V 22.8 ~ 26.4V 25.7 ~ 29.7V 45.6 ~ 52.8V VOLTAGE TOLERANCE Note.3 ¡Ó2.0% LINE REGULATION INPUT 100mVp-p 3.14 ~ 3.63V 4.75 ~ 5.5V VOLTAGE ADJ. RANGE mi OUTPUT Bauar t gepruft Sicherheit egel ma ge od o s be wac g www.tuv.com ID 2000000000 Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3, GB9254 class B Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A DIMENSION K hrs min. MIL-HDBK-217F (25¢J) 199*99*30mm (L*W*H) PACKING 0.6Kg; 24pcs/15.4Kg/1.01CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25¢J of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) 5. Derating may be needed under low input voltages. Please check the derating curve for more details. File Name:RSP-150-SPEC 2013-03-12 RSP-150 150W Single Output with PFC Function Mechanical Specification 199 70 65 25 117 CN1 1 2 R.C. +V ADJ. 6 99 8 5 2-M4 L=4mm 49.5 9.5 3 119 7 na LED 4 Unit:mm ry Case No. 215A series 2 1 16 Terminal Pin No. Assignment 15 25 117 Assignment AC/L AC/N FG Pin No. 1 2 3 Assignment DC OUTPUT -V DC OUTPUT +V Pin No. 4,5 6,7 mi Remote ON/OFF(CN1):JST S2B-XH or equivalent(optional) Pin No. 1 2 6.9 12.5 30 2.5 6.56.5 EMI FILTER & RECTIFIERS I/P O.L.P. eli ACTIVE START CIRCUIT Derating Curve PFC fosc : 67KHz PWM fosc : 67KHz +V -V CONSTANT CURRENT LIMITING & DETECTION CIRCUIT PWM & PFC CONTROL O.V.P. O.T.P. REMOTE CONTROL CN1 Output Derating VS Input Voltage 100 90 80 RSP-150-3.3~7.5 70 LOAD (%) Pr LOAD (%) JST SXH-001T-P0.6 or equivalent RSP-150-12~48 60 40 20 -30 Terminal JST XHP or equivalent RECTIFIERS & FILTER POWER SWITCHING PFC CIRCUIT FG 80 Mating Housing 4-M4(Both Sides) L=4mm Block Diagram 100 Assignment RC+ RC- 0 10 20 40 50 60 AMBIENT TEMPERATURE (¢J) 70 (HORIZONTAL) 60 50 40 85 100 115 135 155 230 264 INPUT VOLTAGE (VAC) 60Hz File Name:RSP-150-SPEC 2013-03-12