FSA831 — USB2.0 High-Speed (480Mbps) Charger Detection with Isolation Switch Features Description USB Battery Charging Rev. 1.2 Supports Data Contact Detect (DCD) Dead Battery Provision (DBP) with 30-Minute Timer USB Detection Isolation Switch Closes for Charging Downstream Port (CDP) Standard Downstream Port (SDP) Switch Type 28V Over-Voltage Tolerance -2V Under-Voltage Tolerance VBUS 10-Lead MicroPak™ 1.6 x 2.1mm, 0.5mm Pitch Package Ordering Information FSA831L10X Applications MP3, Mobile Internet Device (MID), Cell Phone, PDA, Digital Camera, Notebook and Netbook The FSA831 is a charger-detection IC with an integrated isolation switch for use with a micro/mini USB port. The FSA831 detects battery chargers and is compliant with USB Battery Charging Specification, Rev 1.2 (BC1.2). The algorithm incorporates Data Contact Detection (DCD), which ensures that the shorter, inner pins of the USB connector are making contact prior to continuing with battery charger detection. The device determines if a Dedicated Charging Port (DCP), Charging Downstream Port (CDP), or a typical PC host, called a Standard Downstream Port (SDP), is connected. If a charger is detected, the FSA831 determines whether the charger is a DCP or CDP. For SDP and CDP detection, an internal isolation switch is closed to connect the D+/D- lines of the USB cable to the resident USB transceiver within the portable device. The FSA831 conforms to all the constraints for the Dead Battery Provision (DBP) within the BC1.2 specification, including a 30-minute timer that cannot exceed 45 minutes, per BC1.2. Related Resources For samples and questions, please contact: [email protected]. Typical Application FSA831 CHG_AL_N System on Chip (SoC) GOOD_BAT DM_HOST USB PHY Regulator and Switch Control USB Port OVT V BUS DM_CON DP_CON DP_HOST V BUS_IN DD+ SW_OPEN Charger Detect Li+ Bat Charger ID GND GND CHG_DET Figure 1. Mobile Phone Example © 2011 Fairchild Semiconductor Corporation FSA831 • Rev. 1.0.2 www.fairchildsemi.com FSA831 — USB2.0 High-Speed (480Mbps) Charger Detector with Isolation Switch November 2011 0.10 C 2.10 2X A 1.62 B KEEPOUT ZONE, NO TRACES OR VIAS ALLOWED (0.11) 1.12 1.60 PIN1 IDENT IS 2X LONGER THAN OTHER LINES 0.56 0.10 C 2X TOP VIEW (0.35) 10X (0.25) 10X 0.50 RECOMMENDED LAND PATTERN 0.55 MAX 0.05 C 0.05 C 0.05 0.00 C (0.20) 0.35 0.25 SIDE VIEW D 0.65 0.55 DETAIL A 0.35 0.25 4 1 0.35 0.25 DETAIL A 2X SCALE 0.56 5 10 (0.29) (0.15) (0.36) 6 9 0.50 0.25 9X 0.15 1.62 0.35 9X 0.25 0.10 0.05 C A B C ALL FEATURES BOTTOM VIEW NOTES: A. PACKAGE CONFORMS TO JEDEC REGISTRATION MO-255, VARIATION UABD . B. DIMENSIONS ARE IN MILLIMETERS. C. DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994. D. PRESENCE OF CENTER PAD IS PACKAGE SUPPLIER DEPENDENT. IF PRESENT IT IS NOT INTENDED TO BE SOLDERED AND HAS A BLACK OXIDE FINISH. E. DRAWING FILENAME: MKT-MAC10Arev5. Figure 10. 10-Lead, MicroPak™ Part Number Top Mark Operating Temperature Range Package Description Packing Method FSA831L10X KY -40 to 85°C 10-Lead, MicroPak™ 1.6 x 2.1mm, 0.5mm Pitch Tape & Reel Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. © 2011 Fairchild Semiconductor Corporation FSA831 • Rev. 1.0.2 www.fairchildsemi.com 10 FSA831 — USB2.0 High-Speed (480Mbps) Charger Detector with Isolation Switch Physical Dimensions TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. 2Cool AccuPower AX-CAP* BitSiC Build it Now CorePLUS CorePOWER CROSSVOLT CTL Current Transfer Logic DEUXPEED® Dual Cool™ EcoSPARK® EfficientMax ESBC F-PFS FRFET® SM Global Power Resource GreenBridge Green FPS Green FPS e-Series Gmax GTO IntelliMAX ISOPLANAR Making Small Speakers Sound Louder and Better™ MegaBuck MICROCOUPLER MicroFET MicroPak MicroPak2 MillerDrive MotionMax Motion-SPM mWSaver OptoHiT OPTOLOGIC® OPTOPLANAR® ® Fairchild® Fairchild Semiconductor® FACT Quiet Series FACT® FAST® FastvCore FETBench FlashWriter®* FPS PowerTrench® PowerXS™ Programmable Active Droop QFET® QS Quiet Series RapidConfigure Saving our world, 1mW/W/kW at a time™ SignalWise SmartMax SMART START Solutions for Your Success SPM® STEALTH SuperFET® SuperSOT-3 SuperSOT-6 SuperSOT-8 SupreMOS® SyncFET Sync-Lock™ ® * The Power Franchise® TinyBoost TinyBuck TinyCalc TinyLogic® TINYOPTO TinyPower TinyPWM TinyWire TranSiC TriFault Detect TRUECURRENT®* SerDes UHC® Ultra FRFET UniFET VCX VisualMax VoltagePlus XS™ ® * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support, device, or 1. Life support devices or systems are devices or systems which, (a) system whose failure to perform can be reasonably expected to are intended for surgical implant into the body or (b) support or cause the failure of the life support device or system, or to affect its sustain life, and (c) whose failure to perform when properly used in safety or effectiveness. accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I61 © Fairchild Semiconductor Corporation www.fairchildsemi.com