FAN5646 Programmable Indicator “Soft” LED Blinker with TinyWire™ Single-Wire Interface Features Description LED “Soft” Blink: with Logarithmic Fade Up and Fade Down for Power Savings Follow or Repeat Pattern Mode for Blinking when Applications Processor is Powered Down Default Pattern Optionally Modified using TinyWire™ Single-Wire Digital Control for: – LED Current Rise / Fall Time – tON and tOFF for Up to Two Pulses The FAN5646 is a flexible and compact solution for a blinking or “breathing” LED indicator. The internal programmable blink algorithm eliminates any need for continual system processor control. This means longer battery life for a hand-held system because the system processor is not awakened from sleep mode to blink an LED. High-Side Constant Current LED Driver: – 20mA Maximum Output Current – 80mV Drop-out at 20mA IOUT – External RSET (SC70 only) or Internal Current Programming 35A Operating Quiescent Current Short-Circuit, Under-Voltage, and Thermal Protections Wide Input Range: 2.7 to 5.5V Very low dropout of 80mV allows driving an LED without any inductors or switch capacitors. LED blink rate, rise and fall time, and CTRL line behavior can be programmed by a TinyWire™ single-wire digital interface. The on-time and time between pulses can be set for up to two different pulse widths. The default for FAN5646 option 01 is “follow” mode, where the LED turns on with the programmed rise time, then stays on as long as CTRL remains HIGH. When CTRL falls, the LED turns off at the programmed fall time. For option 00; when CTRL is HIGH continuously, the LED repeats the programmed pattern. The FAN5646 is available in a four-pin wafer-level chip-scale package with 0.4mm pitch or a five-lead SC70 package. 4-Bump WLCSP, 0.4mm pitch or 5-Lead SC70 (EIAJ SC88) Applications Cell Phone Pocket PCs and Digital Cameras Bluetooth® Headsets PMP and MP3 players Figure 1. Typical Application Ordering Information Part Number Option Follow Bit Default Temperature Range Package Packing FAN5646UC00X 00 0 -40 to 85°C WLCSP-4, 0.4mm Pitch Tape and Reel FAN5646S700X 00 0 -40 to 85°C 5-Lead SC70, EIAJ SC88 Tape and Reel FAN5646UC01X 01 1 -40 to 85°C WLCSP-4, 0.4mm Pitch FAN5646S701X 01 1 -40 to 85°C 5-Lead SC70, EIAJ SC88 Tape and Reel Tape and Reel Bluetooth® is a registered trademark of Bluetooth SIG, Inc. Important: Contact a Fairchild Semiconductor sales representative for additional performance information and specifications. © 2009 Fairchild Semiconductor Corporation FAN5646 • Rev. 1.0.2 www.fairchildsemi.com FAN5646 — Programmable Indicator “Soft” LED Blinker with TinyWire™ Interface January 2011 0.03 C 2X F A E B 0.40 Ø0.20 Cu Pad A1 0.40 D BALL A1 INDEX AREA Ø0.30 Solder Mask 0.03 C 2X TOP VIEW RECOMMENDED LAND PATTERN (NSMD PAD TYPE) 0.06 C 0.625 0.547 0.05 C C 0.378±0.018 0.208±0.021 E SEATING PLANE SIDE VIEWS D NOTES: A. NO JEDEC REGISTRATION APPLIES. 0.005 Ø0.260±0.020 4X 0.40 B A 0.40 (Y)±0.018 1 2 B. DIMENSIONS ARE IN MILLIMETERS. C. DIMENSIONS AND TOLERANCE PER ASME Y14.5M, 1994. D. DATUM C IS DEFINED BY THE SPHERICAL CROWNS OF THE BALLS. E. PACKAGE NOMINAL HEIGHT IS 586 MICRONS ±39 MICRONS (547-625 MICRONS). (X)±0.018 F BOTTOM VIEW C A B F. FOR DIMENSIONS D, E, X, AND Y SEE PRODUCT DATASHEET. G. DRAWING FILNAME: MKT-UC004ACrev2. Figure 15. 4-Bump WLCSP, 0.4mm Pitch Product-Specific Dimensions Product D FAN5646UC 0.820mm EXY 0.820mm 0.210mm 0.210mm Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. © 2009 Fairchild Semiconductor Corporation FAN5646 • Rev. 1.0.2 www.fairchildsemi.com 11 FAN5646 — Programmable Indicator “Soft” LED Blinker with TinyWire™ Interface Physical Dimensions FAN5646 — Programmable Indicator “Soft” LED Blinker with TinyWire™ Interface Physical Dimensions (Continued) Figure 16. 5-Lead SC70 (EIAJ SC88) Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. © 2009 Fairchild Semiconductor Corporation FAN5646 • Rev. 1.0.2 www.fairchildsemi.com 12 © 2009 Fairchild Semiconductor Corporation FAN5646 • Rev. 1.0.2 www.fairchildsemi.com 13