MEMS Gauge Pressure Sensor 2SMPP MEMS Gauge Pressure Sensor Featuring Small Size and Low Power Consumption • Ultra-miniature 6.1 × 4.7 × 8.2 mm (L × W × H). • Piezo Resistive element provides electrical characteristics that are superior to capacitive type pressure sensors. • 0 to 37 kPa pressure range. • Low Power consumption of 0.2 mW • Low Temperature Influence • RoHS Compliant Ordering Information Standard Models with Surface mount package Classification Bottom Port Type Structure Packaging SOP Plastic sleeve Terminal Arrangement Model 2SMPP-02 Application Examples Icc Vout (+) • Medical equipment • Home appliance • Air movement control • Level indicators Non Conneted Nsub • Leak detection • Pressure controller GND Vout (−) MEMS Gauge Pressure Sensor 2SMPP 35 Specifications ■ Ratings Item 2SMPP-02 Pressure type Gauge Pressure Sensing type Piezo Resistive Applicable gases Air (Non-corrosive, dust free) Ratings Pressure range 0 to 37 kPa Withstand pressure Max. 53 kPa Supply current 100 μADC Current consumption Max. 130 μADC Ambient operating temperature 0 to 50°C (with no icing or condensation) Ambient operating humidity 15 to 90%RH (with no icing or condensation) Ambient storage temperature −30 to 85°C (with no icing or condensation) Ambient storage humidity 10 to 95%RH (with no icing or condensation) Note: 1. The above values are initial values measured at ambient temperature condition of 23°C. 2. Please avoid caustic gases. 3. Standard product is not calibrated for negative pressures. ■ Electrical Characteristics Item 2SMPP-02 Bridge resistance 20 ± 2 kΩ Offset voltage (See note 2.) −2.5 ± 4.0 mV Span voltage (See note 2.) 31.0 ± 3.1 mV (at 37 kPa) Non-Linearity (See note 2.) 0 ± 0.8%FS (0 to 37 kPa) Hysteresis (See note 2.) 0 ± 0.5%FS (0 to 37 kPa) Temperature influence of Span 0.5 ± 1.0%FS (at 0°C) Temperature influence of Offset 0 ± 3.0%FS (0 to 25°C) 0.3 ± 1.0%FS (at 50°C) 0 ± 3.0%FS (25 to 50°C) Note: 1. The above values are initial values measured at ambient temperature condition of 23°C. 2. Not including temperature influence. ■ Environment Characteristics Item 2SMPP-02 Vibration resistance Shock resistance Destruction 10 Hz to 500 Hz 10 G Malfunction 10 Hz to 500 Hz 10 G Destruction 15 G Malfunction 15 G Life Expectancy 300,000 Operations min. (0 to 39 kPa) ESD 1000 V (Human body model) Weight 0.17 g Package Material PPS (Polyphenylenesulfide) 36 2SMPP MEMS Gauge Pressure Sensor Engineering Data (for reference) ■ Output Characteristics Rated Pressure vs. Output Voltage 40 35 Output Voltage [mV] 30 25 20 15 10 5 0 −5 0 Note: 1. 2. 3. 4. 10 20 30 40 Rated Pressure [kPa] 50 Ambient temperature condition: 25°C Drive current: 100 μA These output voltage characteristics are measured with tester without a mounting board. The output voltage characteristics may be influenced by the mounting board. Be sure to check operation including durability in actual equipment before use. Temperature influence of Span voltage Temperature influence of Offset voltage 2.0 Temp. Influence of Offset Voltage [%FS] Temp. Influence of Span Voltage [%FS] 2.0 1.5 1.0 0.5 0.0 −0.5 −1.0 −10 Note: 1. 2. 3. 4. 0 10 20 30 40 Temperature [°C] 50 60 1.5 1.0 0.5 0.0 −0.5 −1.0 −1.5 −2.0 −10 0 10 20 30 40 Temperature [°C] 50 60 Measured points are 0°C and 25°C, 50°C Drive current: 100 μA These output voltage characteristics are measured with tester without a mounting board. The output voltage characteristics may be influenced by the mounting board. Be sure to check operation including durability in actual equipment before use. MEMS Gauge Pressure Sensor 2SMPP 37 Pressure cycle range (0 to 40 kPa) 1 Span voltage range [%FS] Offset voltage range [%FS] 1 0.5 0 −0.5 −1 Note: 1. 2. 3. 4. 0 100000 200000 Pressure cycle 0.5 0 −0.5 −1 300000 0 100000 200000 Pressure cycle Tested temperature condition: 25°C Number of pressure cycle time: 3 x 105 Rated cycle pressure: 0 to 40 kPa These output voltage characteristics are measured with tester without a mounting board. Example of application circuit for MEMS Pressure Sensor VDD Constant current circuit unit Amplifier circuit unit + − Pressure Sensor + − − + Vout − + 1. The pressure sensor is designed to convert a voltage by means of constant current drive. 2. Please amplify the output voltage of the pressure sensor by using the amplifying circuit if necessary. 38 MEMS Gauge Pressure Sensor 2SMPP 300000 Dimensions Note: All units are in millimeters unless otherwise indicated. 2SMPP-02 4.75 4.00 3 0.25±0.05 #1 φ3.80 φ0.62 6.15 5.40 9.85 A 3.20 4-R0.50 4 6 1.27 0.40 1.27 x 2 = 2.54 1.00 2.00 The tolerance is ±0.3mm unless otherwise specified. 1.50 2.80 1.00 4.75 (1.10) φ1.80 φ2.60 Top view 1 Vout (+) 6 Icc 2 NC 5 N-sub 3 GND 6 Vout (-) Marking 0.75 1.125 5.45 0.10 P P 0 2 0.90 4.05 1.125 0.45 5 6 7 8 (0.90) 1.65 1.65 3.30 (1.075) LOT NUMBER MEMS Gauge Pressure Sensor 2SMPP 39 Precautions ■ Precautions for Correct Use Handling Mounting • Only air can be used as pressure media on the products directly. It is prohibited to use pressure media including corrosive gases (e.g. organic solvents gases, sulfur dioxide and hydrogen sulfide gases), fluid and any other foreign materials. • The products are not water proof. Please keep dry in use. • Don't use the products under dew-condensing conditions. Frozen fluid on sensor chips may also cause fluctuation of sensor output and other troubles. • Don't put foreign materials (e.g. a wire or pin) into connecting tube. It may cause breakage of pressure sensor chips or fluctuation of sensor output caused by clogging the tube. • Use the products within rated pressure. Usage at pressure out of the range may cause breakage. • Don't use under high-frequency vibration including ultrasonic wave. • The products may be broken by static electricity. Charged materials (e.g. a workbench and a floor) and workers must provide measures against static electricity, including ground connection. • Overpowering terminals may deform them and detract their solderability. Don't drop or handle the products roughly. • Don't use the products under humid or dusty condition. • Terminals connection of pressure sensors must be handled as directed by a connection diagram. • Use lands on the printed-circuit boards to which the sensor can be securely fixed. • Fix pin No.2 on the printed-circuit boards, not fixed causes fluctuation of sensor output signals. Environmental Conditions for Transport and Storage • It is prohibited to keep the products with corrosive gases (e.g. organic solvents gases, sulfur dioxide and hydrogen sulfide gases). • The products are not water proof. Please keep dry during storage. • An anti-static treatment has been applied to the sleeves. Please note the following points. 1. Getting wet may remove an anti-static treatment and eliminate its effect. 2. The sleeves may feel sticky under hot and humid condition due to the nature of the anti-static treatment. 3. Anti-static has aging degradation. It is prohibited to keep the sleeves for more than six months. The sleeves are also nonreusable. • Don't keep the products under humid or dusty condition. 40 MEMS Gauge Pressure Sensor 2SMPP Soldering • Due to its small size, the thermal capacity of the pressure sensor is low. Therefore, take steps to minimize the effects of external heat. • Dip soldering bath: Max.260°C, within 10 sec. • Soldering iron: Max. 260°C, within 10 sec. • Do not heat the case of sensor package, heat only terminal. • Use a non-corrosive resin type of flux. Since the pressure sensor chip is exposed to the atmosphere, do not allow flux to enter inside. Cleaning • Since the pressure sensor chip is exposed to atmosphere, do not allow cleaning fluid to enter inside. • Avoid ultrasonic cleaning since this may cause breaks or disconnections in the wiring. Coating • Do not coat the pressure sensor when it is mounted to the print circuit board. • Do not wash the print circuit board after the pressure sensor is mounted using detergent containing silicone. Otherwise, the detergent may remain on the surface of the pressure sensor. MEMO MEMS Gauge Pressure Sensor 2SMPP All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ON-LINE OMRON ELECTRONIC COMPONENTS LLC Global - http://www.omron.com USA - http://www.components.omron.com 55 E. Commerce Drive, Suite B Schaumburg, IL 60173 847-882-2288 Cat. No. X305-E-1 10/10 Specifications subject to change without notice MEMS Gauge Pressure Sensor 2SMPP Printed in USA