DBA500G Ordering number : ENA0699A SANYO Semiconductors DATA SHEET DBA500G Diffused Junction Silicon Diode 50A Single-Phase Bridge Rectifier Features • • • Plastic molded structure Peak reverse voltage : VRM=600V Average output current : IO=50A Specifications Absolute Maximum Ratings at Tc=25°C Parameter Peak Reverse Voltage Average Output Current Surge Forward Current Current Squared Time Symbol VRM IO IFSM I 2t Conditions Ratings Unit 600 V 50Hz sine 1cycle peak value, Tc=95°C, with heatsink 50 A 50Hz sine wave, non-repetitive, 1cycle peak value, Tj=25°C 500 A 1ms≤t<10ms, Tj=25°C, Rating of per diode 800 A2s 150 °C Junction Temperature Tj Storage Temperature Tstg Dilective Strength Voltage Vdis Terminals tc case, AC 1 minute Tightening Torque TOR ( ): recommended value --40 to +150 °C 2 kV 0.8(0.6) N•m Electrical Characteristics at Tc=25°C Per Constituent element of bridge. Parameter Forward Voltage Reverse Current Thremal Resistance Symbol VF IR Rth(j-c) Ratings Conditions min IF=25A VR=600V With heatsink (Junction-Case) typ max Unit 1.05 V 10 μA 0.5 °C / W Marking: BA500G Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. http://semicon.sanyo.com/en/network 70710 TK IM / 62007RB TI IM TC-00000624 No. A0699-1/3 DBA500G Package Dimensions Electrical Connection unit : mm (typ) 7806-001 36.0MAX 13.1 24.0MAX 12.5 11.5MAX 9.0 1.5 13.6 36.0MAX 13.1 6.35 1 1.8 3 2 4 13.6 2 3 4 1 2.4 0.8 C3.7 6.35 * 12.8 4.0 9.0 7.0 R1.75 12.5 5.0 3.5 7.0 12.8 * : In case of over 30A of IO. bigger fasten hole should be filled by solder. Lead-Wire with solder connection also requested for over 30A of IO. IF -- VF Average Output Current, IO -- A 10 7 5 25°C °C 3 2 1.0 7 5 3 2 0.1 SIN 50 40 30 20 10 0 0 0.2 0.4 0.6 0.8 1.0 1.2 Forward Voltage, VF -- V 0 1.4 100 80 N SI 40 20 0 0 10 20 30 60 40 Average Output Current, IO -- A 50 60 IT12125 80 100 120 140 160 IT12124 IFSM -- n 600 Tj=150°C 60 40 Case Temperature, Tc -- °C PF -- IO 120 20 IT12123 Peak Surge Forward Current, IFSM -- A Average Forward Power Dissipation, PF -- W IO -- Tc 60 3 2 Tc=1 50 Forward Current, IF -- A 100 7 5 Tj=25°C 50Hz 500 400 300 200 100 0 1.0 2 3 5 7 10 2 Number of Cycles, n 3 5 7 100 IT12126 No. A0699-2/3 DBA500G SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of July, 2010. Specifications and information herein are subject to change without notice. PS No. A0699-3/3