UD2006LS-SB Ordering number : ENA1846 SANYO Semiconductors DATA SHEET UD2006LS-SB Diffused Junction Silicon Diode Low VF Switching Diode Features • • • VF=1.4V max. (IF=20A) VRRM=600V trr=60ns (typ.) Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Repetitive Peak Reverse Voltage VRRM DC bias Average Output Current 50Hz resistive load, Sine wave Tc=32°C Surge Forward Current IO IF(RMS) IFSM Junction Temperature Tj Storage Temperature Tstg R.M.S Forward Current Tc=25°C (SANYO’s ideal heat dissipation condition) Package limited, DC 50Hz sine wave 1pulse --55 to +150 °C : TO-220FI(LS) : SC-67, SOT-186A, TO-220F, TO-220FULLPACK Transistor • Minimum Packing Quantity : 100pcs./bag, 50 pcs./magazine 2.8 3.5 7.2 Marking 16.0 Electrical Connection 2 0.6 1.0 16.1 1.2 14.0 UD2006 0.75 1 LOT No. 0.7 1 1 : Cathode 2 : Anode 2 2.4 3.6 A A • Package • JEITA, JEDEC 0.9 24 °C Product & Package Information 4.5 A 150 unit : mm (typ) 7510-001 10.0 V 20 180 Package Dimensions 3.2 Unit 600 2.55 2.55 SANYO : TO-220FI(LS)-SB http://semicon.sanyo.com/en/network 12611SA TKIM TC-00002553 No. A1846-1/3 UD2006LS-SB Electrical Characteristics at Ta=25°C Parameter Symbol Reverse Voltage VR VF IR Forward Voltage Reverse Current Thermal Resistance Rth(j-c) Junction Capacitance, Cj -- pF 50° 25°C --40°C 0.01 75 1.4 V 20 μA 150 ns 60 ns 4 °C / W Cj -- VR 1000 7 5 C 25° 1 C 00°C Ta= 1 Forward Current, IF -- A 0.1 V 1.2 IF=0.5A, IR=1A Junction -Case : Smoothed DC °C 75 Unit max 600 IF -- VF 1.0 typ VR=600V IF=10A, di / dt=100A/μs trr1 trr2 10 min IR=1mA IF=20A Reverse Recovery Time 100 Ratings Conditions f=100kHz 3 2 100 7 5 3 2 10 7 5 3 2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Forward Voltage, VF -- V Surge Forward Current, IFSM(Peak) -- A Current waveform 50Hz sine wave 180 IS 170 20ms t 160 150 140 130 120 110 100 0.01 2 3 5 7 0.1 2 3 5 Time, t -- s 7 1.0 1.0 0.1 2.4 2 3 5 7 10 IT15985 1.0 10 100 IT15984 Reverse Voltage, VR -- V IT15983 IFSM -- t 190 2.2 Transient Thermal Resistance, Rth(j-c) -- °C / W 0.001 Rth(j-c) -- t 10 7 5 3 2 1.0 7 5 3 2 0.1 0.001 2 3 5 70.01 2 3 5 7 0.1 2 3 Time, t -- s 5 7 1.0 2 3 5 7 10 IT15986 No. A1846-2/3 UD2006LS-SB Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of January, 2011. Specifications and information herein are subject to change without notice. PS No. A1846-3/3