Ordering number: EN5839 Monolithic Linear IC L88M00T Series 3.3 to 12 V, 0.5 A Low Dropout Voltage Regulator Overview Package Dimensions The L88M00T Series are low dropout voltage regulator ICs with output current of 0.5 A. Because they can operate with a low input-output voltage difference, they contribute to smaller and more efficient set power supplies, and are optimum for audio-visual and office automation equipment. unit : mm 3103-TP-3H [L88M00T Series] Functions and Features . Output voltage L88M33T: 3.3 V L88M05T: 5 V L88M09T: 9 V L88M12T: 12 V . 500 mA output current . Low minimum input-output voltage differential (0.4 V typ) to save energy and miniaturize transformer size. . enables Set size can be miniaturized with compact TP-3H power . package. Surface mounting on board permits allowable power to be raised. . dissipation Enhanced mount flexibility with range of formed products. SANYO : TP-3H Specifications Maximum Ratings at Ta = 25°C (common to L88M00T series) Parameter Symbol Input voltage VIN max Allowable power dissipation Pd max Conditions Ta % 25°C, no heat sink Tc = 25°C, with infinite heat sink Thermal resistance (junction-atmosphere) θj-a Ratings Unit 18 V 1 W 6.25 W 125 °C/W °C/W Thermal resistance (junction-to-case) θj-c 20 Operating temperature Topr –20 to +85 °C Storage temperature Tstg –55 to +150 °C Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN D3098HA(II) No.5839-1/8 L88M00T Series Pin Assignment Top view [L88M33T] Operating Conditions at Ta = 25 °C Parameter Input voltage Output current Symbol Conditions Ratings Unit VIN 4 to 17 V lOUT 0 to 500 mA Operating Characteristics at Tj = 25 °C, VIN = 6.3 V, IO = 500 mA, COUT = 100 μF, CIN = 1 μF, see specified Test Circuit. Parameter Symbol VOUT VDROP1 VDROP2 ΔVOLN ΔVOLD lOP lOSC IQ1 IQ2 VNO ΔVOUT/ΔTj Rrej Output voltage Dropout voltage Line regulation Load regulation Peak output current Output short-circuit current Quiescent current Output noise voltage Temperature coefficient of output voltage Ripple rejection Conditions min 3.2 lO = 150 mA 4 V % VIN % 17 V 5 mA % IOUT % 500 mA 600 IOUT = 0 10 Hz % f % 100 kHz Tj = 25 to 125 °C f = 120 Hz, 4.3 V % VIN % 17 V typ 3.3 0.4 0.2 10 24 900 100 1.9 24 30 ±0.4 65 max 3.4 0.6 0.3 50 80 Unit V V V mV mV mA mA mA mA μVrms mV/°C dB 300 5.0 50 [L88M05T] Operating Conditions at Ta = 25 °C Parameter Input voltage Output current Symbol Conditions Ratings Unit VIN 5.8 to 17 V lOUT 0 to 500 mA Operating Characteristics at Tj = 25 °C, VIN = 8 V, IO = 500 mA, COUT = 100 μF, CIN = 1 μF, see specified Test Circuit. Parameter Output voltage Dropout voltage Line regulation Load regulation Peak output current Output short-circuit current Quiescent current Output noise voltage Temperature coefficient of output voltage Ripple rejection Symbol VOUT VDROP1 VDROP2 ΔVOLN ΔVOLD lOP lOSC IQ1 IQ2 VNO ΔVOUT/ΔTj Rrej Conditions min 4.85 lO = 150 mA 5.8 V % VIN % 17 V 5 mA % IOUT % 500 mA 600 IOUT = 0 10 Hz % f % 100 kHz Tj = 25 to 125 °C f = 120 Hz, 6 V % VIN % 17 V typ 5.0 0.4 0.2 10 30 900 100 2.0 24 40 ±0.5 65 max 5.15 0.6 0.3 50 100 300 5.0 50 Unit V V V mV mV mA mA mA mA μVrms mV/°C dB No.5839-2/8 L88M00T Series [L88M09T] Operating Conditions at Ta = 25 °C Parameter Input voltage Output current Symbol Conditions Ratings Unit VIN 9.9 to 17 V lOUT 0 to 500 mA Operating Characteristics at Tj = 25 °C, VIN = 12 V, IO = 500 mA, COUT = 100 μF, CIN = 1 μF, see specified Test Circuit. Parameter Symbol VOUT VDROP1 VDROP2 ΔVOLN ΔVOLD lOP lOSC IQ1 IQ2 VNO ΔVOUT/ΔTj Rrej Output voltage Dropout voltage Line regulation Load regulation Peak output current Output short-circuit current Quiescent current Output noise voltage Temperature coefficient of output voltage Ripple rejection Conditions min 8.73 lO = 150 mA 9.9 V % VIN % 17 V 5 mA % IOUT % 500 mA 600 IOUT = 0 10 Hz % f % 100 kHz Tj =25 to 125 °C f = 120 Hz, 10 V % VIN % 17 V typ 9.0 0.4 0.2 10 54 900 100 2.3 24 40 ±0.9 59 max 9.27 0.6 0.3 50 180 Unit V V V mV mV mA mA mA mA μVrms mV/°C dB 300 5.0 50 [L88M12T] Operating Conditions at Ta = 25 °C Parameter Symbol Conditions Ratings Unit Input voltage VIN 13 to 17 V Output current lOUT 0 to 500 mA Operating Characteristics at Tj = 25 °C, VIN = 15 V, IO = 500 mA, COUT = 100 μF, CIN = 1 μF, see specified Test Circuit. Parameter Output voltage Dropout voltage Line regulation Load regulation Peak output current Output short-circuit current Quiescent current Output noise voltage Temperature coefficient of output voltage Ripple rejection Symbol VOUT VDROP1 VDROP2 ΔVOLN ΔVOLD lOP lOSC IQ1 IQ2 VNO ΔVOUT/ΔTj Rrej Conditions min 11.64 lO = 150 mA 13 V % VIN % 17 V 5 mA % IOUT % 500 mA 600 IOUT = 0 10 Hz % f % 100 kHz Tj = 25 to 125 °C f = 120 Hz, 13 V % VIN % 17 V typ 12.0 0.4 0.2 10 70 900 100 2.6 24 40 ±1.2 58 max 12.36 0.6 0.3 50 240 300 5.0 50 Unit V V V mV mV mA mA mA mA μVrms mV/°C dB No.5839-3/8 L88M00T Series Reference voltage Start-up circuit Equivalent Circuit Block Diagram (Common to L88M00T Series) Error amp Short circuit protector Thermal protector Test Circuit (Common to L88M00T Series) L88M00T Notes: 1. To ensure operational stability, CIN and COUT should be placed as close to the IC as possible. 2. Because the output capacitor COUT is set at over 100 μF to prevent oscillation at low temperatures, a capacitor that exhibits little change in capacity with temperature variations should be used (such as a tantalum capacitor). 3. When VIN is minus (–) and GND is plus (+) (reversed connection), excessive current flow will occur. No.5839-4/8 Allowable power dissipation, Pd max – W L88M00T Series Pd max – Ta Common for L88M00T Series With infinite heat sink Mounted on copper-clad area of 2,000 mm2 Mounted on copper-clad area 740 mm2 Mounted on copper-clad area 180 mm2 Mounted on copper-clad area 36 mm2 No heat sink Ambient temperature, Ta – °C 1) The allowable power dissipation is 1.0 W (Ta = 25°C) with no fin attached, but when mounted on a hybrid IC board or printed circuit board, high allowable power dissipation is achieved, despite the compact package. The graph below depicts the relationship between the copper-clad area and allowable power dissipation when mounted on a glass epoxy board (50 × 5 0 × 0.8 tmm3) with a copper thickness of 18 μm. Allowable power dissipation, Pd max – W Pd max – S Common for L88M00T series PCB Copper-clad area, S – (mm2) Copper-clad area, S – mm2 2) Pd is the value for when the solder on the surface of the IC heat sink has melted completely and the surface mount is horizontal. 3) Please be advised that the flow solder application system (full-heat method) cannot be recommended. Lead Formings LR forming FA forming No.5839-5/8 L88M00T Series VO – VIN Output voltage, VO – V Output voltage, VO – V VO – VIN Input voltage, VIN – V VO – VIN Input voltage, VIN – V VDROP – IO Output voltage, VO – V Dropout voltage, VDROP – V Common for L88M00T Series Output current, IO – A VO – IO Output voltage, VO – V Output voltage, VO – V Input voltage, VIN – V VO – IO Output current, IO – A VO – IO Output voltage, VO – V Quiescent current, IQ – mA Output current, IO – A IQ – VIN Output current, IO – A Input voltage, VIN – V No.5839-6/8 L88M00T Series IQ – VIN Quiescent current, IQ – mA Quiescent current, IQ – mA IQ – VIN Input voltage, VIN – V VO – Ta Output voltage, VO – V Quiescent current, IQ – mA Input voltage, VIN – V IQ – IO Ambient temperature, Ta – °C IQ – Ta Output voltage, VO – V Quiescent current, IQ – mA Output current, IO – A VO – Ta Ambient temperature, Ta – °C Rrej – f Common for L88M00T Series Ambient temperature, Ta – °C Ripple rejection, Rrej – dB Peak output current, IOP – A Output short-circuit current, IOSC – A Ambient temperature, Ta – °C IOP, IOSC – Ta Frequency, f – Hz No.5839-7/8 L88M00T Series Ripple rejection, Rrej – dB Rrej – f Frequency, f – Hz Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the “Delivery Specification” for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of December, 1998. Specifications and information herein are subject to change without notice. PS No.5839-8/8