Ordering number: EN4186B Monolithic Linear IC L88MS00T Series 4 to 12 V, 0.5 A Low Dropout Voltage Regulator with On/Off Function Overview Package Dimensions unit : mm The L88MS00T Series has an on-chip on/off function to maximize equipment power saving effectiveness. Because it can operate with a low input-output voltage difference, it contributes to smaller and more efficient set power supplies, optimum for audio-visual and office automation equipment. 3103-TP-5H [L88MS00T Series] Functions . Output voltage . . L88MS04T: 4 V L88MS06T: 6 V L88MS09T: 9 V On/off control of output voltage by 500 mA output current L88MS05T: 5 V L88MS08T: 8 V L88MS12T: 12 V strobe pin (active low) Features . Low minimum input-output voltage differential (0.4 V typ) to save energy and miniaturize transformer size. . enables Quiescent current is low with output off (L88MS05T/I OFF = 40 μA typ, except I ). . Set size can be miniaturized with compact TP-5H power package. . Surface mounting on board permits allowable power to be raised. . dissipation Enhanced mount flexibility with range of formed products. . On-chip protective circuitry (fold back short circuit, thermal load). . over External noise suppression pin provided. SANYO : TP-5H Q STB Pin Assignment Top view Specifications Maximum Ratings at Ta = 25°C (common to L88MS00T series) Parameter Symbol Input voltage VIN max Strobe pin input voltage VST max Allowable power dissipation Pd max Conditions θj-a Unit 18 Ta % 25°C, no heat sink Tc = 25°C, with infinite heat sink Thermal resistance (junction-atmosphere) Ratings V VIN max V 1 W 6.25 W 125 °C/W °C/W Thermal resistance (junction-to-case) θj-c 20 Operating temperature Topr –20 to +85 °C Storage temperature Tstg –55 to +150 °C SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN 31097HA(II)/9302TS No.4186-1/11 L88MS00T Series [L88MS04T] Operating Conditions at Ta = 25 °C Parameter Input voltage Symbol Conditions Ratings Unit VIN 4.7 to 17 V Output current lOUT 0 to 500 mA Output on control voltage VSTL –0.3 to +0.8 V Output off control voltage VSTH 2.0 to VIN V Operating Characteristics at Tj = 25 °C, VIN = 7 V, IO = 500 mA, COUT = 100 μF, CIN, Cn = 1 μF, see specified Test Circuit. Parameter [Output on, VST = ‘‘L’’] Output voltage Dropout voltage Line regulation Load regulation Peak output current Output short-circuit current Quiescent current Output noise voltage Temperature coefficient of output voltage Ripple rejection Output on control voltage [Output off, VST = ‘‘H’’ ] Low output voltage Static current Output off control voltage Symbol VOUT VDROP1 VDROP2 ΔVOLN ΔVOLD lOP lOSC IQ1 IQ2 VNO ΔVOUT/ΔTj Rrej VSTL VO OFF IQ OFF VSTH Conditions min typ max Unit 3.88 4.12 0.6 0.3 50 80 10 Hz % f % 100 kHz 4.0 0.4 0.2 10 24 900 100 1.9 24 30 V V V mV mV mA mA mA mA μVrms Tj = 25 to 125 °C ±0.4 lO = 150 mA 4.7 V % VIN % 17 V 5 mA % IOUT % 500 mA 600 IOUT = 0 f = 120 Hz, 5 V % VIN % 17 V 300 5.0 50 mV/°C 72 VST = 5 V VST = 5 V, Except ISTB 20 35 2.0 0.8 dB V 200 70 VIN mV μA V [L88MS05T] Operating Conditions at Ta = 25 °C Parameter Input voltage Symbol Conditions Ratings Unit VIN 5.8 to 17 V Output current lOUT 0 to 500 mA Output on control voltage VSTL –0.3 to +0.8 V Output off control voltage VSTH 2.0 to VIN V No.4186-2/11 L88MS00T Series Operating Characteristics at Tj = 25 °C, VIN = 8 V, IO = 500 mA, COUT = 100 μF, CIN, Cn = 1 μF, see specified Test Circuit. Parameter [Output on, VST = ‘‘L’’] Output voltage Dropout voltage Line regulation Load regulation Peak output current Output short-circuit current Quiescent current Output noise voltage Temperature coefficient of output voltage Ripple rejection Output on control voltage [Output off, VST = ‘‘H’’ ] Low output voltage Static current Output off control voltage Symbol VOUT VDROP1 VDROP2 ΔVOLN ΔVOLD lOP lOSC IQ1 IQ2 VNO ΔVOUT/ΔTj Rrej VSTL VO OFF IQ OFF VSTH Conditions min typ max Unit 4.85 5.15 0.6 0.3 50 100 10 Hz % f % 100 kHz 5.0 0.4 0.2 10 30 900 100 2.0 24 40 V V V mV mV mA mA mA mA μVrms Tj = 25 to 125 °C ±0.5 lO = 150 mA 5.8 V % VIN % 17 V 5 mA % IOUT % 500 mA 600 IOUT = 0 f = 120 Hz, 6 V % VIN % 17 V 300 5.0 50 mV/°C 74 VST = 5 V VST = 5 V, Except ISTB 20 40 2.0 0.8 dB V 200 80 VIN mV μA V [L88MS06T] Operating Conditions at Ta = 25 °C Parameter Symbol Conditions Ratings Unit Input voltage VIN 6.8 to 17 V Output current lOUT 0 to 500 mA Output on control voltage VSTL –0.3 to +0.8 V Output off control voltage VSTH 2.0 to VIN V Operating Characteristics at Tj = 25 °C, VIN = 9 V, IO = 500 mA, COUT = 100 μF, CIN, Cn = 1 μF, see specified Test Circuit. Parameter [Output on, VST = ‘‘L’’] Output voltage Dropout voltage Line regulation Load regulation Peak output current Output short-circuit current Quiescent current Output noise voltage Temperature coefficient of output voltage Ripple rejection Output on control voltage [Output off, VST = ‘‘H’’ ] Low output voltage Static current Output off control voltage Symbol VOUT VDROP1 VDROP2 ΔVOLN ΔVOLD lOP lOSC IQ1 IQ2 VNO ΔVOUT/ΔTj Rrej VSTL VO OFF IQ OFF VSTH Conditions min typ max Unit 5.82 6.18 0.6 0.3 50 120 10 Hz % f % 100 kHz 6.0 0.4 0.2 10 36 900 100 2.1 24 40 V V V mV mV mA mA mA mA μVrms Tj = 25 to 125 °C ±0.6 lO = 150 mA 6.8 V % VIN % 17 V 5 mA % IOUT % 500 mA 600 IOUT = 0 f = 120 Hz, 7 V % VIN % 17 V 300 5.0 50 mV/°C 76 VST = 5 V VST = 5 V, Except ISTB 20 60 2.0 0.8 dB V 200 120 VIN mV μA V No.4186-3/11 L88MS00T Series [L88MS08T] Operating Conditions at Ta = 25 °C Parameter Input voltage Symbol Conditions Ratings Unit VIN 8.8 to 17 V Output current lOUT 0 to 500 mA Output on control voltage VSTL –0.3 to +0.8 V Output off control voltage VSTH 2.0 to VIN V Operating Characteristics at Tj = 25 °C, VIN = 11 V, IO = 500 mA, COUT = 100 μF, CIN, Cn = 1 μF, see specified Test Circuit. Parameter [Output on, VST = ‘‘L’’] Output voltage Dropout voltage Line regulation Load regulation Peak output current Output short-circuit current Quiescent current Output noise voltage Temperature coefficient of output voltage Ripple rejection Output on control voltage [Output off, VST = ‘‘H’’ ] Low output voltage Static current Output off control voltage Symbol VOUT VDROP1 VDROP2 ΔVOLN ΔVOLD lOP lOSC IQ1 IQ2 VNO ΔVOUT/ΔTj Rrej VSTL VO OFF IQ OFF VSTH Conditions min typ max Unit 7.76 8.24 0.6 0.3 50 160 10 Hz % f % 100 kHz 8.0 0.4 0.2 10 48 900 100 2.2 24 40 V V V mV mV mA mA mA mA μVrms Tj = 25 to 125 °C ±0.8 lO = 150 mA 8.8 V % VIN % 17 V 5 mA % IOUT % 500 mA 600 IOUT = 0 f = 120 Hz, 9 V % VIN % 17 V 300 5.0 50 mV/°C 76 VST = 5 V VST = 5 V, Except ISTB 20 150 2.0 0.8 dB V 200 300 VIN mV μA V [L88MS09T] Operating Conditions at Ta = 25 °C Parameter Input voltage Symbol Conditions Ratings Unit VIN 9.9 to 17 V Output current lOUT 0 to 500 mA Output on control voltage VSTL –0.3 to +0.8 V Output off control voltage VSTH 2.0 to VIN V No.4186-4/11 L88MS00T Series Operating Characteristics at Tj = 25 °C, VIN = 12 V, IO = 500 mA, COUT = 100 μF, CIN, Cn = 1 μF, see specified Test Circuit. Parameter [Output on, VST = ‘‘L’’] Output voltage Dropout voltage Line regulation Load regulation Peak output current Output short-circuit current Quiescent current Output noise voltage Temperature coefficient of output voltage Ripple rejection Output on control voltage [Output off, VST = ‘‘H’’ ] Low output voltage Static current Output off control voltage Symbol VOUT VDROP1 VDROP2 ΔVOLN ΔVOLD lOP lOSC IQ1 IQ2 VNO ΔVOUT/ΔTj Rrej VSTL VO OFF IQ OFF VSTH Conditions min typ max Unit 8.73 9.27 0.6 0.3 50 180 10 Hz % f % 100 kHz 9.0 0.4 0.2 10 54 900 100 2.3 24 40 V V V mV mV mA mA mA mA μVrms Tj =25 to 125 °C ±0.9 lO = 150 mA 9.9 V % VIN % 17 V 5 mA % IOUT % 500 mA 600 IOUT = 0 f = 120 Hz, 10 V % VIN % 17 V 300 5.0 50 mV/°C 76 VST = 5 V VST = 5 V, Except ISTB 20 200 2.0 0.8 dB V 200 400 VIN mV μA V [L88MS12T] Operating Conditions at Ta = 25 °C Parameter Symbol Conditions Ratings Unit Input voltage VIN 13 to 17 V Output current lOUT 0 to 500 mA Output on control voltage VSTL –0.3 to +0.8 V Output off control voltage VSTH 2.0 to VIN V Operating Characteristics at Tj = 25 °C, VIN = 15 V, IO = 500 mA, COUT = 100 μF, CIN, Cn = 1 μF, see specified Test Circuit. Parameter [Output on, VST = ‘‘L’’] Output voltage Dropout voltage Line regulation Load regulation Peak output current Output short-circuit current Quiescent current Output noise voltage Temperature coefficient of output voltage Ripple rejection Output on control voltage [Output off, VST = ‘‘H’’ ] Low output voltage Static current Output off control voltage Symbol VOUT VDROP1 VDROP2 ΔVOLN ΔVOLD lOP lOSC IQ1 IQ2 VNO ΔVOUT/ΔTj Rrej VSTL VO OFF VQ OFF VSTH Conditions min typ max 11.64 12.36 0.6 0.3 50 240 10 Hz % f % 100 kHz 12.0 0.4 0.2 10 70 900 100 2.6 24 40 Tj = 25 to 125 °C ±1.2 lO = 150 mA 13 V % VIN % 17 V 5 mA % IOUT % 500 mA 600 IOUT = 0 f = 120 Hz, 13 V % VIN % 17 V V V V mV mV mA 300 mA 5.0 mA 50 mA μVrms mV/°C 76 VST = 5 V VST = 5 V, Except ISTB 20 500 2.0 Unit 0.8 dB V 200 1000 VIN mV μA V No.4186-5/11 L88MS00T Series Reference voltage Start-up circuit Equivalent Circuit Block Diagram Error amp ON/OFF Control Short circuit protector Thermal protector Test Circuit (Common to L88MS00T Series) L88MS00T Notes: 1. Because the output capacitor COUT is set at over 100 μF to prevent oscillation at low temperatures, a capacitor that exhibits little change in capacity with temperature variations should be used (such as a tantalum capacitor). 2. Adding capacitor Cn enables external noise suppression and ripple rejection to be improved. However, attention should be given to system stability (phase margin). 3. To ensure operational stability, CIN, COUT, and Cn should be placed as close to the IC as possible. 4. When the strobe (STB) pin is open, output is turned on by internal bias. When the strobe function is not used, the STB pin should be connected to GND to complete strobe operation. 5. When VIN is minus (–) and GND is plus (+) (reversed connection), excessive current flow will occur. No.4186-6/11 L88MS00T Series Function Table On/off Control Input Equivalent Circuit VSTB VOUT L H H L Control signal Sample Application Circuit Adjustment of output voltage VOUT (1) Reducing VOUT VOUT can be lowered by externally connecting a resistor RA between the Cn and VOUT pins. Allowable power dissipation, Pd max – W (2) Increasing VOUT VOUT can be raised by externally connecting a resistor RB between the Cn and GND pins. Pd max – Ta Common for L88MS00T Series With infinite heat sink Mounted on copper-clad area of 2,000 mm2 Mounted on copper-clad area 740 mm2 Mounted on copper-clad area 180 mm2 Mounted on copper-clad area 36 mm2 No heat sink Ambient temperature, Ta – °C The allowable power dissipation is 1.0 W (Ta = 25°C) with no fin attached, but when mounted on a hybrid IC board or printed circuit board, high allowable power dissipation is achieved, despite the compact package. The graph below depicts the relationship between the copper-clad area and allowable power dissipation when mounted on a glass epoxy board (50 × 5 0 × 0.8 tmm3) with a copper thickness of 18 μm. No.4186-7/11 L88MS00T Series Allowable power dissipation, Pd max – W Pd max – S Common for L88MS00T series Copper-clad area, S – mm2 * Pd is the value for when the solder on the surface of the IC heat sink has melted completely and the surface mount is horizontal. * Please be advised that the flow solder application system (full-heat method) cannot be recommended. Lead Formings MA forming FA forming LR forming VO – VIN Output voltage, VO – V Output voltage, VO – V VO – VIN Input voltage, VIN – V Input voltage, VIN – V No.4186-8/11 L88MS00T Series VDROP – IO VO – VIN Output voltage, VO – V Dropout voltage, VDROP – V Common for L88MS00T Series Output current, IO – A VO – IO Output voltage, VO – V Output voltage, VO – V Input voltage, VIN – V VO – IO Output current, IO – A VO – VST Output voltage, VO – V Output off control voltage, VSTH – V Output on control voltage, VSTL – V Output current, IO – A VSTH, VSTL – Ta Ambient temperature, Ta – °C IQ – VIN Strobe voltage, VST – V IQ – VIN Quiescent current, IQ – mA Quiescent current, IQ – mA Common for L88MS00T Series Input voltage, VIN – V Input voltage, VIN – V No.4186-9/11 Common for L88MS00T Series (except IST) Input voltage, VIN – V IQ – Ta Ambient temperature, Ta – °C IQ OFF (ST ON) – Ta (except IST) Ambient temperature, Ta – °C Ripple rejection, Rrej – dB Ambient temperature, Ta – °C Rrej – f Quiescent current during strobe, IQ OFF – mA Output voltage, VO – V Ambient temperature, Ta – °C IOP, IOSC – Ta Peak output current, IOP – A Output short-circuit current, IOSC – A IQ OFF (ST ON) – VIN Quiescent current, IQ – mA Output current, IO – A VO – Ta Quiescent current during strobe, IQ Quiescent current, IQ – mA OFF IQ – IO – mA L88MS00T Series Frequency, f – Hz No.4186-10/11 L88MS00T Series No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. Anyone purchasing any products described or contained herein for an above-mentioned use shall: 1 Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use: 2 Not impose any responsibility for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of March, 1997. Specifications and information herein are subject to change without notice. No.4186-11/11