Sharma Ceramic Capacitors Page 1 Quick Reference Series Features Page Multilayer Chip Type SNPO 0402-3035 Case Sizes 6.3 - 4KV 4 SX7R 0402-3035 Case Sizes 6.3 - 4KV 5 SY5V 0402-3035 Case Sizes 10 - 500V 6 SZ5U 0402-3035 Case Sizes 10 - 1KV 7 Multilayer Radial Leaded Type RNPO 2.5/5.0mm Lead Spacing 25 - 100V RX7R 2.5/5.0mm Lead Spacing 25 - 100V RY5V 2.5/5.0mm Lead Spacing 25 - 63V RZ5U 2.5/5.0mm Lead Spacing 25 - 63V 8 Multilayer Axial Leaded Type ANPO 5mm Body Length 50 - 100V AX7R 5mm Body Length 50 - 100V AZ5U 5mm Body Length 50 - 100V Tel: (949)642-7324 SECI Engineers & Buyers' Guide 9 Fax: (949)642-7327 Sharma Ceramic Capacitors Page 2 Example below indicates : SNPO series, 470 pF, 5%, 50 Volt, Tape/Reel packed, 0805 case size. S (EXAMPLE) N P O 4 7 1 J 0 5 0 T 2 Series Series Code: SNPO, SX7R, SZ5U, SY5V. Note: SNPO indicates COG(NPO) dielectric Capacitance 3 Digit Capacitance Code (per EIA Standard): MULTILAYER First Two Digits Represent Significant Figures of Capacitance in pF. Third Digit Indicates Number of Zeros For Values Below 10 pF, R replaces second digit to indicate a decimal point. Example: 471 = 470 pF. , 1R5 = 1.5 pF. CERAMIC CHIP CAPACITORS Tolerance Capacitance Tolerance Code: Capacitance Tolerance ± .25 pF Code C ± .5 pF ± 1% D F ± 2% ± 5% G J ±10% K ±20% -20 + 80% M Z Rated Voltage 3 Digit Voltage Code Rated Voltage(V) 6.3 10 16 25 50 100 200 250 500 1000 2000 3000 4000 Code 006 010 016 025 050 100 200 250 500 1KV 2KV 3KV 4KV Packing Code Code T B Style Tape & Reel Bulk Case Code Tolerance on Dimensions Case Code 0 1 2 3 4 5 6 7 8 9 10 '' L'' and ''W'': ± 0.35mm(0.014'')max. Case Size 0402 0603 0805 1206 1210 1808 1812 2220 2225 3012 3035 CASE DIMENSIONS AND TOLERANCES Tape/Reel & Packaging Specifications Taping Dimensions Dimensions mm(inches) Case φ 1.5 Code L W T max. e 0402 1.00(0.040) 0.50(0.020) 0.55(0.022) 0.20(0.008) 0603 1.60(0.063) 0.80(0.032) 0.90(0.035) 0.30(0.012) 0805 2.03(0.080) 1.27(0.050) 1.27(0.050) 0.50(0.020) 1206 3.20(0.125) 1.60(0.063) 1.35(0.053) 0.50(0.020) 1210 3.20(0.125) 2.50(0.098) 1.60(0.063) 0.50(0.020) 1808 4.50(0.177) 2.03(0.800) 1.80(0.071) 0.50(0.020) + 0.10 - 0.0 ± 0.1 ± 0.1 2.0 4.0 E F W B A SIZE P A Tmax B ±0.1 mm or ±0.1 mm or W ±0.3 mm or F ±0.1 mm or E ±0.1 mm or P Tmax ±0.1 mm or CODE ±0.004" ±0.004" ±0.012" ±0.004" ±0.004" ±0.004" 0402 0.7 (0.028) 1.3 (0.051) 8.0 (0.315) 3.5 (0.138) 1.75 (0.069) 4.0 (0.157) 1.7 (0.067) 0603 1.1 (0.043) 1.9 (0.075) 8.0 (0.315) 3.5 (0.138) 1.75 (0.069) 4.0 (0.157) 1.7 (0.067) 1.7 (0.067) 1812 4.50(0.177) 3.20(0.125) 2.20(0.087) 0.60(0.027) 2220 5.70(0.224) 5.00(0.197) 2.80(0.110) 0.65(0.026) 0805 1.7 (0.067) 2.4 (0.094) 8.0 (0.315) 3.5 (0.138) 1.75 (0.069) 4.0 (0.157) 2225 5.70(0.224) 6.30(0.248) 2.80(0.110) 0.65(0.026) 1206 2 (0.079) 3.6 (0.142) 8.0 (0.315) 3.5 (0.138) 1.75 (0.069) 4.0 (0.157) 1.7 (0.067) 3012 1210 2.8 (0.110) 3.7 (0.147) 8.0 (0.315) 3.5 (0.138) 1.75 (0.069) 4.0 (0.157) 1.7 (0.067) 7.60(0.299) 3.20(0.125) 5.70(0.224) 0.70(0.028) 1808 2.4 (0.094) 4.9 (0.193) 12.0 (0.472) 3.5 (0.138) 1.75 (0.069) 4.0 (0.157) 1.7 (0.067) 3035 7.60(0.299) 8.90(0.350) 6.30(0.248) 0.70(0.028) 1812 3.6 (0.142) 4.9 (0.193) 12.0 (0.472) 3.5 (0.138) 1.75 (0.069) 4.0 (0.157) 1.7 (0.067) 2220 5.2 (0.205) 6.0 (0.236) 12.0 (0.472) 3.5 (0.138) 1.75 (0.069) 4.0 (0.157) 1.7 (0.067) 2225 6.6 (0.260) 6.0 (0.236) 12.0 (0.472) 3.5 (0.138) 1.75 (0.069) 4.0 (0.157) 1.7 (0.067) "L " & "W" tolerances: ±0.35mm(0.014)max. Reel Dimensions STANDARD PACKAGING QUANTITIES Case Code Bulk Tape & Reel 0402 10000 pcs. 10000 pcs/reel 0603 5000 pcs. 4000 pcs/reel 0805 5000 pcs. 4000 pcs/reel 1206 5000 pcs. 4000 pcs/reel 1210 5000 pcs. 4000 pcs/reel 1808 1000 pcs 1000 pcs/reel 1812 1000 pcs 1000 pcs/reel 2220 1000 pcs 1000 pcs/reel 2225 1000 pcs 1000 pcs/reel 3012 1000 pcs 500 pcs/reel 3035 1000 pcs 500 pcs/reel Reel Dimensions in Millimeters A B C D E W t ø178 ±2.0 ø50 min. 13.0 ±0.5 21.0 ±0.8 2.0 ±0.8 8.8/12.8 ±1.5 2.0 ±0.5 ø330 ±2.0 ø100 min. 13.0 ±0.5 21.0 ±0.8 2.0 ±0.8 8.8/12.8 ±1.5 2.0 ±0.6 Reel Dimensions in Inches A B C D E W t Special package quantity available upon request ø7 ±0.08 ø2.0 min. 5.0 ±0.02 0.83 ±0.03 0.08 ±0.3 0.35/0.50 ±0.06 0.08 ±0.02 and factory approval. ø13 ±0.08 ø4.0 min. 5.0 ±0.3 0.83 ±0.03 0.08 ±0.3 0.35/0.50 ±0.06 0.08 ±0.02 Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Sharma Ceramic Capacitors Page 3 Reliability and Test Conditions Parameter Specification Test Method Capacitance Within tolerance specified in the part number Class (I) C<30 pF: Q≥400+20xC C30 pF: Q>1000 Class (II) X7R: DF≤3%, Z5U: DF≤3%, Y5V: DF≤5% C≤50,000 IR: >10 G Ohms C≤50,000 IR: >500 Ohms.F Class (I) C≤1000 pF: 1 MHz. ±10% 0.5 to 5 V rms C>1000 pF: 1 KHz. ±10% 1.0 ±0.2 V rms Class (II) 1 KHz. ±10%, 1.0 ±0.2 V rms Dissipation Factor (Tan d and Q) Insulation Resistance (IR) Dielectric Withstanding Voltage Termination Adherence Apply rated voltage fro 60 seconds at room temperature and normal humidity (70% max.) Apply rated voltage (Class I) or 2.5 x rated voltage (Class II) to both terminations for 5 seconds. Charge and discharge current are less hat 50 mA. After soldering capacitor on the glass-epoxy PWB, 50 gms of steady pull is applied in direction of arrow for 10 seconds. ( See Figure 1) After soldering capacitor on the glass-epoxy PWB, 2 mm of bending shall be applied for 10 seconds as shown in the drawing. ( See Figure 2) There shall be no evidence of damage or flash over during the test. No mechanical damage Bend Strength No mechanical damage Life Test (High Temperature Loading test) - Capacitance Change Class (I): No more than ±3% or ±0.3 pf which ever is more. Class (II): X7R: ±10% max. Z5U, Y5V: ±30% max. Class (I) C<10 pF: Q≥200+10xC 10 pF≤ C < 30 pF Q≥275+2xC: C>30 pF: Q>350 Class (II) X7R: DF≤5% Z5U & Y5V: DF≤7.5% 1000 M Ohms or 50 Ohms.F whichever is less Life Test (High Temperature Loading test) - DF or Q Life Test (High Temperature Loading test) - IR Apply 2 x rated voltage at maximum operating temperature for 1000 hours. The surge current shall not exceed 50 mA. After this, the samples shall be kept in room temperature for 24 hours (Class I) or 48 hours (class II) and then measured for the parameters indicated. Parameter Moisture Resistance Test - Capacitance change Moisture Resistance Test - Q or DF Moisture Resistance Test - IR Humidity Load Test Capacitance change Humidity Load Test Q or DF Humidity Load Test IR Temperature Cycling Test - Capacitance change Temperature Cycling Test - Q or DF Temperature Cycling Test - IR Specification Class (I): No more than ±5% or ±0.5 pf which ever is more. Class (II): X7R: ±10% max. Z5U & Y5V: ±30% max. Class (I) C<10 pF: Q≥200+10xC 10 pF≤ C < 30 pF Q≥275+2xC: C≥30 pF: Q≥350 Class (II) X7R: DF≤5% Z5U & Y5V: DF≤7.5% 1000 M Ohms or 50 Ohms.F whichever is less Class (I): No more than ±7.5% or ±0.75 pf which ever is more. Class (II): X7R: ±12.5% max. Z5U, Y5V: ±30% max. Class (I) C<30 pF: Q≥ 100+3xC C ≥ 30 pF: Q≥200 Class (II) X7R: DF≤5% Z5U & Y5V: DF≤7.5% 500 M Ohms or 25 Ohms.F whichever is less Class (I): No more than ±2.5% or ±0.25 pf which ever is more. Class (II): X7R: ±7.5% max. Z5U, Y5V: ±20% max. Parts to meet the initial specifications Parts to meet the initial specifications Figure 1 Solderability Resistance to Solder Heat Test Capacitance Change Figure 2 Resistance to Solder Heat Test - Q or DF Resistance to Solder Heat Test - IR Termination area shall be at least 75% covered with a new solder coating. There shall be no crack and ceramic exposure of terminated surface due to melting. No more than ±2.5% or ±0.25 pf which ever is more. Class (II): X7R: ±7.5% max. Z5U, Y5V: ±20% max. Parts to meet the initial specifications Parts to meet the initial specifications Test Method The capacitor shall be subjected to 40 °C and 90 to 95% RH for 500 hours. After this, samples shall be kept in room temperature for 24 hrs. (Class I) or 48 hrs. (Class II), and them shall be measured (Class I) or 48 hours (Class II) and then measured for the parameters indicated. The capacitor shall be subjected to rated voltage at 40 °C and 90 to 95 % RH for 500 hours. Surge current shall not exceed 50 mA. After this, samples shall be kept in room temperature for 24 hrs. (Class I) or 48 hours (Class II), and them shall be measured (Class I) or 48 hours (Class II) and then measured for the parameters indicated. Perform 5 cycles as follows: 1. Room temperature dwell for 15 minutes. 2. Minimum operating temperature dwell for 30 minutes. 3. Room temperature dwell for 30 minutes. 4. Maximum operating temperature dwell for 30 minutes. After the above testing condition, samples shall be kept in room temperature for 24 hrs. (Class I) or 48 hours (Class II), and them shall be measured (Class I) or 48 hours (class II) and then measured for the parameters indicated. The capacitors are completely immersed for 10 ±0.5 seconds in the molten solder with a temperature of 260±5°C solder. Cladding material of outerelectrode: Sn (~100%) The capacitors are completely immersed for 10 ±1.0 seconds in the molten solder with a temperature of 270±5°C solder. Preheat before immersion, 1. 80 to 100 °C for 2 minutes 2. 150 to 180 °C for 2 minutes The capacitance measurement shall be made after the samples have been kept at room temperature for 24 hours. Class II Dielectric Code Explanation First symbol Low temperature Second symbol High Temperature Third Symbol MAX. Capacitance change over requirement requirement temperature (a letter) (a number) (a letter) Z Y X +10 deg. C -30 deg. C -55 deg. C Tel: (949)642-7324 2 4 5 6 7 +45 deg. C +65 deg. C +85 deg. C +105 deg. C +125 deg. C A B C D E F P R S T U V SECI Engineers & Buyers' Guide +1.0% +/- 1.5% +/- 2.2% +/- 3.3% +/- 4.7% +/- 7.5% +/- 10.0% +/- 15.0% +/- 22.0% +22%, -33% +22%, -56% +22%, -82% Fax: (949)642-7327 Sharma Ceramic Capacitors Page 4 SNPO Series APPLICATION: FEATURES: The SNPO series has a high Q, low K GENERAL SPECIFICATIONS: Operating temperature: -55 to +125 °C • Very low temperature coefficient Temperature coefficient: ±30ppm per °C temperature compensating type of capacitance dielectric with stable electrical • Stable electrical characteristics Capacitance tolerance: ±5%, <10pF ±.25pF • High capacitance and miniature size Capacitance range: .47pF to .1uF • Low and high voltage options Dielectric withstanding voltage: 2 times • Available in bulk and tape & reel Case code range: 0402 to 3035 or ±.5pF standard, ±10% optional properties under varying voltage, temperature, frequency and time conditions. The Voltage range: 6.3V to 4KV DC series is suitable for circuits requiring low loss, circuits with pulse, timing circuits and for tuning applications. the working VDC for 5 seconds Typically used in R/F, microwave, and other communications equipment. Fre- packaging Note: See Reliability and Test Conditions quently designed in precision industrial controls, process control and test& mea- • Consistent dimensions and surface finish page for more specifications surement instrumentation. Because of it's wide range of temperature stability, often • Nickel barrier terminations used in automotive and quality audio applications. Note: Extended capacitance range values, optional case codes, special tolerances may be available based on factory approval. COG(NPO) DIELECTRIC CAPACITANCE RANGE Tolerance: (J), <5pF: ±.25pF(C), ≥5pF<10pF:±.5pF(D) standards. Optional:(K) Voltage/Case Code Options Voltage(DC) 0402 0603 0805 1206 1210 1808 1812 2220 2225 3012 6.3V 18-820pF 10V 12-680pF 16V .62-470pF 2-680pF 25V .47-560pF .47-1000pF .47-3300pF .47-4700pF 560pF-.01uF 1000pF-.015uF 1000pF-.047uF 50V .47-330pF .47-1000pF .47-2200pF .47-4700pF 10pF-.015uF 10-3300pF 10pF-.022uF 1000pf-.022uF 100V .47-1000pF .47-2200pF .47-3300pF 10-6800pF 10-4700pF 10pF-.01uF 10pF-.01uF 470pF-.022uF 200V .47-1000pF .47-1500pF .47-2200pF 10-3300pF 10-4700pF 10-5600pF 10pF-.012uF 470pF-01uF 250V .47-820pF .47-2200pF 10-3300pF 10-4700pF 10-5600pF 10pF-.012uF 470pF-01uF 500V .47-560pF .47-2700pF 10-2700pF 10-4700pF 10-4700pF 10-6800pF 470-6800pF 1KV .47-680pF 10-1000pF 10-4700pF 10-2200pF 10-2700pF 470-2700pF 2KV .47-470pF 10-470pF 10-2200pF 10-1000pF 10-1000pF 470-1000pF 3KV 10-1000pF 10-1000pF 10-680pF 470-1000pF 4KV 10-470pF 10-330pF 10-560pF 470-1000pF 3035 1000pF-.1uF 1000pF-.047uF 1000pF-.033uF .01-.022uF COG / NPO is a dielectric with stable electrical properties under varying voltage, temperature, frequency and time. This dielectric has the least value of temperature coefficient. The temperature coefficient characteristics is illustrated in Figure 1.1 Figure 1.2 illustrates the variation pattern of Dissipation Factor with respect to temperature. The DC Voltage coefficient and AC Voltage coefficient are illustrated in Figures 1.3 and 1.4 respectively. COG (NPO) Characteristic Graphs Tel: (949)642-7324 FIGURE 1.1 FIGURE 1.2 FIGURE 1.3 FIGURE 1.4 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Sharma Ceramic Capacitors Page 5 SX7R Series APPLICATION: FEATURES: The SX7R series has a moderate K temperature GENERAL SPECIFICATIONS: • Stable electrical characteristics temperature stable. It shows moderate change Operating temperature: -55 to +125 °C Temperature coefficient: ±15% value change compensating type of capacitance dielectric and is • High capacitance and miniature size Capacitance tolerance: ±10% standard, • Available in bulk and tape & reel Capacitance range: 10pF to 4.7uF ±20% optional in electrical properties under changing temperature, voltage and frequency conditions. The series is suitable for by-passing, coupling, and frequency discriminating Voltage range: 6.3V to 4KV DC packaging Dielectric withstanding voltage: 2 times circuit applications. Typically used in computer and data processing • Low and high voltage options the working VDC for 5 seconds Case code range: 0402 to 3035 products and equipment. It offers relatively stable characteristics at a lower cost • Consistent dimensions and surface finish consideration than the SNPO series. This series has higher capacitance range options than the SNPO range. Note: See Reliability and Test Conditions • Nickel barrier terminations page for more specifications Note: Extended capacitance range values, optional case codes, special tolerances may be available based on factory approval. X7R DIELECTRIC CAPACITANCE RANGE Tolerance: (K) standard Optional: (M) Voltage/Case Code Options Voltage(DC) 0402 0603 0805 1206 1210 1808 1812 6.3V .001-.0068uF .0082-1uF 1-4.7uF 10V 150pF-.033uF .12-.22uF .1-.47uF 1-4.7uF 16V 150pF-.033uF .12-.22uF .1-.47uF 1000pF-1uF 10pF-2.2uF 25V 150pF-.022uF .01-.1uF 220pF-1uF 1000pF-1uF 10pF-2.2uF .01-.47uF 50V 150pF-.01uF 150pF-.056uF 10pF-1uF 330pF-1uF 10pF-2uF .01-.33uF 100V 100pF-.01uF 10pF-.1uF 10pF-.33uF 10pF-.22uF 150pF-.22uF 150pF-.47uF 200V 100pF-.068uF 10pF-.022uF 10pF-.068uF 10pF-.1uF 150pF-.1uF 150pF-.22uF 250V 100-4700pF 10pF-.022uF 10pF-.047uF 10pF-.1uF 150pF-.1uF 150pF-.15uF 500V 10pF-.01uF 10pF-.026uF 150pF-.068uF 150pF-.047uF 150pF-.1uF 1KV 10pF-.01uF 150pF-.015uF 150pF-.022uF 150pF-.027uF 2KV 10pF-.027uF 150pF-.01uF 150pF-.01uF 150pF-.01uF 3KV 150-4700pF 150-2200pF 4KV 150-2000pF 150-1500pF 2220 2225 3012 3035 .01-1uF .01-2.2uF .01-1uF .01-2.2uF 150pF-1.2uF 6800pF-1uF .01-1uF 150pF-.47uF 6800pF-1uF 150pF-.47uF 6800pF-1uF 150pF-.39uF 1000pF-1uF 150pF-.056uF .0027-.047uF 150pF-.047uF .001-.022uF 150-6800pF 1000-6800pF 150-3900pF .001-.01uF X7R is a moderately stable dielectric under changing temperature, voltage and frequency conditions. This dielectric has moderate value of temperature coefficient. The temperature coefficient characteristics is illustrated in Figure 2.1. Figure 2.2 illustrates the variation pattern of Dissipation Factor with respect to temperature. The DC Voltage coefficient and AC Voltage coefficient are illustrated in Figure 2.3 and 2.4 respectively. X7R Characteristic Graphs FIGURE 2.1 FIGURE 2.2 FIGURE 2.3 FIGURE 2.4 Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Sharma Ceramic Capacitors Page 6 SY5V Series APPLICATION: FEATURES: The SY5V series has a relatively high K GENERAL SPECIFICATIONS: Operating temperature: -30 to +85 °C • High capacitance values Temperature coefficient: -82% to +22% value temperature compensating type of capacitance dielectric. The electrical properties • Miniature size change over operating temperature Capacitance tolerance: ±20% standard, can vary widely under changing temperature, voltage, and time conditions. They are • Low and high voltage options -20%/ +80% optional Capacitance range: 2200pF to 10uF suitable for all general purpose applications where higher capacitance values are required. Voltage range: 10V to 500V DC • Available in bulk and tape & reel Best when used in non-critical, room temper- Dielectric withstanding voltage: 2 times packaging ature stable conditions with low DC bias. the working VDC for 5 seconds Suitable for de-coupling applications in stable • Low cost for high capacitance Case code range: 0402 to 3035 • Consistent dimensions and surface finish Note: See Reliability and Test Conditions temperature conditions. page for more specifications • Nickel barrier terminations Note: Extended capacitance range values, optional case codes, special tolerances may be available based on factory approval. Y5V DIELECTRIC CAPACITANCE RANGE Tolerance: (M) standard Optional: (Z) Voltage/Case Code Options Voltage(DC) 0402 0603 0805 1206 1210 1808 1812 6.3V 10V .01-.1uF .27-1uF .27-3.3uF 16V .01-.1uF .27-1uF .27-3.3uF .27-6.8uF .1-10uF 25V .01-.056uF .047-.47uF .01-2.2uF .01-3.3uF .1-10uF .15-3.3uF 50V .01-..033uF .01-.22uF .01-.68uF .01-2.2uF .1-3.3uF .15-2.2uF 100V 2200pF-.068uF .01-.22uF 4700pF-1uF .22-2.2uF .01-.82uF .01-2.2uF 200V 4700pF-.068uF .01-.056uF .01-.47uF .01-.39uF 4700pF-.39uF .01-.47uF 250V .01-.056uF .01-.47uF .01-.39uF 4700pF-.39uF .01-.47uF 500V .012-.047uF 1KV 2KV 3KV 4KV 2220 2225 3012 3035 .68-4.7uF 1-10uF .68-3.3uF 1-6.8uF .01-2uF 6800pF-1.5uF .01-.68uF 6800pF-1uF .01-.68uF 6800pF-1uF Y5V Characteristic Graphs The temperature coefficient characteristics of Y5V is illustrated in Figure 3.1. Figure 3.2 illustrates the variation pattern of Dissipation Factor with respect to temperature. The DC Voltage coefficient and aging pattern are illustrated in Figure 3.3 and 3.4 respectively. Tel: (949)642-7324 FIGURE 3.1 FIGURE 3.2 FIGURE 3.3 FIGURE 3.4 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Sharma Ceramic Capacitors Page 7 SZ5U Series APPLICATION: FEATURES: The SZ5U series has a high K temperature GENERAL SPECIFICATIONS: Operating temperature: +10 to +85 °C • High capacitance values Temperature coefficient: -56% to +22% value compensating type of capacitance dielectric. The electrical properties of this dielectric changes change over operating temperature • Miniature size Capacitance tolerance: ±20% standard, considerably under changing temperature, voltage and time conditions. High capacitance values -20%/ +80% optional • Low and high voltage options Capacitance range: 1000pF to 10uF are available for general purpose applications. Well suited for filtering, transient suppression Voltage range: 10V to 1KV DC • Available in bulk and tape & reel blocking, and charge storage requirements. Dielectric withstanding voltage: 2 times packaging the working VDC for 5 seconds • Low cost for high capacitance Case code range: 0603 to 3035 • Consistent dimensions and surface finish Note: See Reliability and Test Conditions page for more specifications • Nickel barrier terminations Note: Extended capacitance range values, optional case codes, special tolerances may be available based on factory approval. Z5U DIELECTRIC CAPACITANCE RANGE Tolerance: (M) Standard Optional: (Z) Voltage/Case Code Options Voltage(DC) 0402 0603 0805 1206 1210 1808 1812 6.3V 10V .18-.22uF .18-.47uF 16V .18-.22uF .18-.47uF .18-2.2uF .01-4.7uF 25V .01-.22uF .01-1uF .01-2.2uF .01-4.7uF .15-3.3uF 50V .01-.1uF .01-.68uF .01-1uF .01-2.2uF .15-2.2uF 100V .01-.22uF .01-.47uF .01-1uF .1-2.2uF 200V .01-.1uF .01-.22uF 250V 500V .01-.047uF .01-.1uF 1KV 1000-4700pF 1000pF-.01uF 2KV 3KV 4KV 2220 2225 3012 3035 .68-4.7uF 1-10uF .68-3.3uF 1-6.8uF Z5U Characteristic Graphs The temperature coefficient characteristics of Z5U is illustrated in Figure 4.1. Figure 4.2 illustrates the variation pattern of Dissipation Factor with respect to temperature. The DC Voltage coefficient and aging pattern are illustrated in Figure 4.3 and 4.4 respectively. Tel: (949)642-7324 FIGURE 4.1 FIGURE 4..2 FIGURE 4.3 FIGURE 4..4 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Sharma Ceramic Capacitors Page 8 Introduction: MULTILAYER CERAMIC LEADED CAPACITORS Radial Epoxy coated multilayer ceramic capacitors available in popular COG(NPO), X7R, Y5V and Z5U dielectrics. Ideal for industrial and general purpose electronic applications. These capacitors are available in both Bulk and Tape & Reel packing for automatic insertion. Series Specifications: COG/NPO X7R Y5V Z5U Temperature Range in °C: -55 to +125 -55 to +125 -30 to +85 +10 to +85 Dissipation Factor % @25°C & 1KHz: Insulation Resistance @25°C: (minimum of) Overload Voltage(25°C) 5 seconds max: 3.0 max 6.0 max 4.0 max 1 G Ohm or 1 G Ohm or 1 G Ohm or 100 Ohm F 100 Ohm F 100 Ohm F 100 Ohm F 2x rated voltage 2x rated voltage 2x rated voltage 2x rated voltage Temperature Coefficient: Tolerance options: 0.25 max 1 G Ohm or ±30ppm/°C ±15% chg. -82 to +22% chg. -56 to +22% chg. J(5%), K(10%) K(10%), M(20%) M(20%), Z(-20 to +80%) M(20%), Z(-20 to +80%) Radial Leaded Series T L Features • H COG(NPO) & X7R dielectrics in 25, 50 and 100 Volt rating. Y5V and Z5U in 25, 50, and 63 Volt rating. Radial configuration with choice of 2 standard lead spacing. Available in Bulk and Tape & Reel Packing (EIA Standard). • • 7.0mm min. (0.28" min.) Style A : s = 2.5 ± 0.5mm s Style B : s = 5.0 ±0.5mm 0.5mm (0.02") Style A s Style B CASE CODE/ CAPACITANCE, VOLTAGE, LEAD STYLE OPTIONS TABLE Case Code 0805 Size Dimensions L H T 4.1mm max. 3.8mm max. 3.2mm max. 5.5mm max. 1206 6.5mm max. 1210 8.5mm max. 1812 10.5mm max. 2225 6.0mm max. 7.5mm max. 7.5mm max. 10mm max. 4.5mm max. 5.0mm max. 5.0mm max. 6.5mm max. Voltage COG(NPO) Y5 V Z5U Lead Style Capacitance Range X7R 25V 10-3300pF 220pF-1uF .01-.1uF .01-.22uF A,B 50V 10-2200pF 220pF-.1uF .01-.68uF .01-.1uF A,B 100V 10-1000pF 220pF-.068uF 25V 10-4700pF 1000pF-1uF .01-1.2uF .01-.33uF A,B .01-1uF .01-.22uF A,B A,B 50V 10-4700pF 1000pF-.1uF 100V 10-3300pF 1000pF-.068uF 25V 560pF-.01uF 1000pF-.33uF .1-2.2uF .1-1uF B 50V(63V) 560pF-6800pF 1000pF-2uF .1-2.2uF .1-1uF B 100V 560pF-4700pF 1000pF-1uF 25V 1000pF-.015uF .01-.47uF .15-3.3uF .68-2.2uF B 50V(63V) 1000pF-.01uF .01-.33uF .15-3.3uF .68-2.2uF B 100V 1000-6800pF .01-.15uF 25V 1000pF-.022uF .01-1uF 1-4.7uF 1.5-3.3uF B 50V(63V) 1000pF-.022uF .01-1uF 1-4.7uF 1.5-3.3uF B 100V 1000pF-.01uF .01-.47uF A,B B B B Note: Extended capacitance range values; special voltages, tolerances, lead spacing and forming may be available on factory approval. PART NUMBERING EXPLANATION Series: RNPO, RX7R, RY5V, RZ5U Packaging: Capacitor Value: Voltage Code: Case Code: T - Taped 3 digit EIA Code 025 - 25V 05 - 0805 B - Bulk 050 - 50V 06 - 1206 J (5%) 063 - 63V 10 - 1210 Lead Style: K (10%) 100 - 100V 12 - 1812 A - 2.5mm 25 - 2225 B - 5.0mm Tolerance Code: M (20%) Z (-20/+80%) Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Sharma Ceramic Capacitors Page 9 Introduction: Axial Epoxy coated multilayer ceramic capacitors available in popular COG(NPO), X7R and Z5U dielectrics. Ideal for industrial and general purpose electronics applications. These capacitors are available in both Bulk and Tape & Reel packing for automatic insertion. Series Specifications: Temperature Range in °C: Dissipation Factor % @25°C & 1KHz: Insulation Resistance @ 2 5°C : (minimum of) MULTILAYER CERAMIC LEADED CAPACITORS Axial Leaded NPO X7R Z5U -55 to +125 -55 to +125 +10 to +85 0.25 max 2.5 max 3.0 max 1 G Ohm or 1 G Ohm or 1 G Ohm or 100 Ohm F 100 Ohm F 100 Ohm F SERIES DØ L 25.4mm min. (1.0" min. 0.5mm (0.02") Axial Series ANPO Rated Voltage V DC 50 Dielectric COG (NPO) Temperature Coefficient ±30 ppm / °C Capacitance Range pF Tolerance Dimensions L max. D max. 10 to 750 5.0 mm 0.200" J( ±5%), K( ±10%) 3.0 mm 0.120" Axial Series AX7R Rated Voltage V DC Dielectric Temperature Coefficient 50 X7R ±15% Rated Voltage V DC Dielectric Temperature Coefficient 50 Z5U Capacitance Range pF Tolerance 560 to 15000 Dimensions L max. D max. K( ±10%), M( ±20%) 5.0 mm 0.200" 3.0 mm 0.120" Axial Series AZ5U +22 to -56% Capacitance Range pF Tolerance 1000 to100000 Dimensions L max. D max. M( ±20%) Z(-20 to +80%) 5.0 mm 0.200" 3.0 mm 0.120" PART NUMBERING Series: ANPO, AX7R, AZ5U Cap Value: 3 Digit EIA Code Tel: (949)642-7324 Packaging: T - Tape B- Bulk Voltage Code: 050 - 50VDC 100 - 100VDC Tol Code: J5% K10% M20% Z - -20 +80% Lead Style: X- Axial SECI Engineers & Buyers' Guide Fax: (949)642-7327 Sharma Ceramic Capacitors SCY1, SCY2 Series Safety Recognized Ceramic Capacitor Specifications Operating Temperature -25°C to +85°C Capacitance Range 100pF to 10000pF (Y2 series) 100pF to 4700pF (Y1 series) Capacitance Tolerance K=±10%, M=±20% Rated voltage 250VAC, 400VAC Temperature Coefficient ±10% for Y5P, +30% to -80% for Y5V (Y2 series) ±10% for Y5P, +20% to -55% for Y5U (Y1 series) Dissipation Factor (tand) Y5P: 2.5% max at 25°C and 1KHz, 1±0.2 Vrms Y5V: 5% max at 25°C and 1KHz, 1±0.2 Vrms (Y2 series) Y5U: 2.5% max at 25°C and 1KHz, 1±0.2 Vrms (Y1 series) Insulation Resistance at 25°C Dielectric Strength 10000Mohm at 500VDC for 1 minute 2600VAC for 60 seconds (Rated voltage: 400VAC) - Y2 series 4000VAC for 60 seconds (Rated voltage: 400VAC) - Y1 series Dimensions and Tolerance: B = 3.0 mm max d = 0.60 mm ±0.05 mm F = 7.5 or 9.5 ±0.8 mm (Y2 Series) F = 9.5 ±0.8 mm (Y1 Series) L = 5 ~ 25 mm Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Sharma Ceramic Capacitors SCY1 Series - Special size or items on request. - Tolerance Dimension ±0.5 mm. T.C. CAP. D Dimension (mm) T 100PF 8 9.5±0.8 8 150PF 8 9.5±0.8 8 220PF 8 9.5±0.8 8 9 9.5±0.8 8 10 9.5±0.8 8 560PF 10 9.5±0.8 8 680PF 12 9.5±0.8 8 1000PF 14 9.5±0.8 8 1000PF 8 9.5±0.8 8 1500PF 9 9.5±0.8 8 12 9.5±0.8 8 14 9.5±0.8 8 3900PF 14 9.5±0.8 8 4700PF 16 9.5±0.8 8 ±10% 330PF (Y5P) 470PF +20 ~ -55% 2200PF (Y5U) TOL. 3300PF K±10% M±20% SCY2 Series - Special size or items on request. - Tolerance Dimension ±0.5 mm. T.C. CAP. TOL. D Dimension (mm) T 100PF 8 7.5±0.8 5 150PF 8 7.5±0.8 5 220PF 8 7.5±0.8 5 8 7.5±0.8 5 8 7.5±0.8 5 560PF 10 7.5±0.8 5 680PF 10 7.5±0.8 5 1000PF 12 7.5±0.8 5 ±10% 330PF (Y5P) 470PF Tel: (949)642-7324 K±10% SECI Engineers & Buyers' Guide Fax: (949)642-7327 Sharma Ceramic Capacitors +30 ~ -80% (Y5V) 1000PF 8 7.5±0.8 5 1500PF 8 7.5±0.8 5 2200PF 9 7.5±0.8 5 3300PF 10 7.5±0.8 5 12 7.5±0.8 5 4700PF 12 7.5±0.8 5 6800PF 16 9.5±0.8 5 8200PF 16 9.5±0.8 5 10000PF 18 9.5±0.8 5 3900PF M±20% PART NUMBERING EXPLANATION Series: SCY1, SCY2 Capacitor Value: Voltage Code: RoHS compliant: 3 digit EIA Code 250 - 250VAC RH 400 - 400VAC Tolerance Code: K (10%) M (20%) Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327