SB2003M Ordering number : EN8371A SANYO Semiconductors DATA SHEET SB2003M Schottky Barrier Diode 30V, 2.0A Rectifier Applications • High frequency rectification (switching regulators, converters, choppers). Features • • • Low switching noise. Low leakage current and high reliability due to highly reliable planar structure. Ultrasmall package permitting applied sets to be small and slim (mounting height 0.85mm). Specifications Absolute Maximum Ratings at Ta=25°C Parameter Repetitive Peak Reverse Voltage Symbol Conditions Ratings Unit VRRM VRSM 30 V 35 V 2.0 A Surge Forward Current IO IFSM Junction Temperature Storage Temperature Nonrepetitive Peak Reverse Surge Voltage Average Output Current 50Hz sine wave, 1 cycle 10 A Tj --55 to +125 °C Tstg --55 to +125 °C Electrical Characteristics at Ta=25°C Parameter Reverse Voltage Symbol VR Ratings Conditions min IR=0.2mA 30 0.45 0.45 0.50 V 30 μA Reverse Current Interterminal Capacitance IR C IF=2.0A VR=15V VR=10V, f=1MHz Reverse Recovery Time trr IF=IR=100mA, See specified Test Circuit. Rth(j-a)2 V 0.40 VF Rth(j-a)1 Unit max IF=1.0A Forward Voltage Therrmal Resistance typ 75 Mounted in Cu-foiled area of 1.44mm2✕0.03mm on glass epoxy board Mounted on a ceramic board (500mm2✕0.8mm) V pF 20 ns 93.4 °C / W 71.4 °C / W Marking : SE Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. http://semicon.sanyo.com/en/network 62310 TK IM / 62405SB MS IM TB-00001375 No.8371-1/3 SB2003M Package Dimensions unit : mm (typ) Electrical Connection 2.0 6 5 5 4 1 : Cathode 2 : Cathode 3 : Anode 4 : No Contact 5 : Cathode 6 : Cathode 1 2 3 Top view 4 0 to 0.02 0.25 1 2 3 0.65 0.3 0.85 0.07 6 0.15 2.1 1.6 0.25 7022A-014 1 2 3 1 : Cathode 2 : Cathode 3 : Anode 4 : No Contact 5 : Cathode 6 : Cathode 6 5 4 SANYO : MCPH6 trr Test Circuit 50Ω 100Ω 10Ω 10μs 10mA 100mA 100mA Duty≤10% --5V trr IF -- VF 7 5 7 5 3 2 3 2 Ta=125°C 100°C Reverse Current, IR -- mA 1.0 1.0 7 5 3 2 25° C 100 °C 75° C 50° C 25° C 0°C --25 °C 0.1 7 5 3 7 5 3 2 75°C 0.1 7 5 3 2 50°C 0.01 7 5 3 2 25°C 0.001 7 5 3 2 0°C 0.0001 Ta= 1 Forward Current, IF -- A IR -- VR 10 7 5 3 2 --25°C 0.00001 7 5 3 2 2 0.000001 0.01 0 0.1 0.2 0.3 0.4 Forward Voltage, VF -- V 0.5 0.6 IT08588 0 5 10 15 20 25 Reverse Voltage, VR -- V 30 35 IT08589 No.8371-2/3 C -- VR 7 Interterminal Capacitance, C -- pF 5 3 2 100 7 5 3 2 0.1 2 3 5 7 1.0 2 3 5 7 10 2 Reverse Voltage, VR -- V 5 7 IT08590 IFSM -- t 14 Surge Forward Current, IFSM(Peak) -- A 3 Average Forward Power Dissipation, PF(AV) -- W SB2003M PF(AV) -- IO 1.4 Rectangular wave (1) 1.2 (2)(4)(3) θ 360° 1.0 Sine wave 0.8 180° 360° 0.6 0.4 (1)Rectangular wave θ=60° (2)Rectangular wave θ=120° (3)Rectangular wave θ=180° (4)Sine wave θ=180° 0.2 0 0 0.5 1.0 1.5 2.0 Average Output Current, IO -- A 2.5 IT08591 Current waveform 50Hz sine wave 12 IS 20ms t 10 8 6 4 2 0 7 0.01 2 3 5 7 0.1 2 Time, t -- s 3 5 7 1.0 2 3 ID00435 SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of June, 2010. Specifications and information herein are subject to change without notice. PS No.8371-3/3