SMA3109 Ordering number : ENA1749 SANYO Semiconductors DATA SHEET SMA3109 Silicon MMIC Wideband Amplifier Features • • • • • High Gain Wideband response Low current High output power Port impedance : Gp=23dB typ. @1GHz : fu=3.6GHz : ICC=16mA typ. : Po(1dB)=4dBm : input/output 50Ω Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Supply Voltage VCC 5 V Circuit Current ICC 25 mA Allowable Power Dissipation PD 280 mW Operating Temperature Topr --40 to +85 °C Storage Temperature Tstg --55 to +150 °C Product & Package Information unit : mm (typ) 7022A-018 • Package : MCPH6 • JEITA, JEDEC : SC82, SC82A, SC88 • Minimum Packing Quantity : 3,000pcs/reel 2.0 6 5 0.15 Type of Taping: TL 4 3 0.65 LF TL 0.3 0.85 0.25 2 LOT No. 1 LOT No. 0.07 Marking 0 t o 0.02 2.1 1.6 0.25 Package Dimensions 1 2 3 1 : VCC 2 : GND 3 : OUT 4 : GND 5 : GND 6 : IN 6 5 4 SANYO : MCPH6 http://semicon.sanyo.com/en/network 62310AM TK IM TC-00002386 No. A1749-1/5 SMA3109 Recommended Operating Conditions at Ta=25°C Parameter Symbol Supply Voltage Ratings Conditions min VCC Topr Operating Ambient Temperature typ Unit max 2.7 3 3.3 V --40 +25 +85 °C Electrical Characteristics at Ta=25°C, VCC=3V, Zs=ZL=50Ω Parameter Symbol Circuit Current Ratings Conditions min ICC Power Gain Gp Isolation ISL Input Return Loss RLin Output Return Loss RLout Noise Figure NF Gain 1dB Compression Output Power Po(1dB) Upper Limit Operating Frequency fu typ Unit max 11.5 16.0 20.5 f=1GHz 21.0 23.0 26.0 f=2.2GHz 22.0 24.0 27.0 f=1GHz 27.0 31.5 f=2.2GHz 27.0 31.5 f=1GHz 16.0 20.5 f=2.2GHz 10.0 15.0 f=1GHz 15.0 20.0 f=2.2GHz 10.0 14.0 dB dB 4.3 5.0 f=2.2GHz 4.3 5.0 4.0 6.4 f=2.2GHz 2.0 4.2 3dB down below flat gain at f =1GHz 3.6 dB dB f=1GHz f=1GHz mA dB dBm GHz Note) Pay attention to handling since it is liable to be affected by static electricity due to the high frequency process adopted. Test Circuit 100pF IN 6 5 4 1 2 3 100pF OUT 1000pF 100nH VCC Connect 2, 4 and 5 with GND. IT15580 No. A1749-2/5 SMA3109 Evaluation Board IN OUT C1 C2 L1 C3 Symbol Value C1, C2 VCC C3 100pF 1000pF L1 100nH ICC -- VCC 30 Circuit Current, ICC -- mA 25 20 15 10 5 0 0 1 2 3 Circuit Voltage, VCC -- V 4 IT15581 Gp -- f 35 25 Input Return Loss, RLin -- dB Power Gain , Gp -- dB 30 3.0V 3.3V 2.7V 20 15 10 5 0 1000 2000 Frequency, f -- MHz RLin -- f 0 3000 4000 IT15582 --5 --10 V 3.3 V 3.0 --15 2.7 V --20 --25 --30 0 1000 2000 Freqency, f -- MHz 3000 4000 IT15583 No. A1749-3/5 SMA3109 ISL -- f Isolation, ISL -- dB --20 3.0V 2.7V --30 3.3V --40 --50 0 1000 2000 3000 Freqency, f -- MHz --10 --15 V 3.3 3.0V V 2.7 --20 --25 --30 4000 0 1000 2000 3000 4000 Freqency, f -- MHz IT15585 Pout -- Pin 15 VCC=3.0V f=1.0GHz VCC=3.0V f=2.2GHz 10 Output Level, Pout -- dBm 10 Output Level, Pout -- dBm --5 IT15584 Pout -- Pin 15 RLout -- f 0 Output Return Loss, RLout -- dB --10 5 0 --5 5 0 --5 --10 --10 --15 --50 --40 --20 --30 --10 Input Level, Pin -- dBm --15 --50 0 --40 --20 --30 --10 Input Level, Pin -- dBm IT15586 0 IT15587 S Parameter S11 S22 50 50 100 25 250 10 100 25 250 10 3GHz 2GHz 10 0 50 100 250 10 0 25 25 50 3GHz 1GHz 100 250 1GHz 2GHz --10 --250 --25 --10 --250 --25 --100 --50 IT15588 --100 --50 IT15589 No. A1749-4/5 SMA3109 Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of June, 2010. Specifications and information herein are subject to change without notice. PS No. A1749-5/5