SMA4306 Ordering number : ENA1771A SANYO Semiconductors DATA SHEET Si Monolithic Linear IC SMA4306 Oscillator IC for Laser Diode Noise Suppression Applications Features • • • Frequency specification with LC : Added LC sets the operating frequency Ultra small package : 1.6×1.6×0.56mm Halogen free compliance Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Supply Voltage Conditions Ratings Unit VCC ICC 6 V 50 mA PD Topr 280 mW Operating Temperature --40 to +85 °C Storage Temperature Tstg --55 to +150 °C Circuit Current Power Dissipation Package Dimensions Product & Package Information unit : mm (typ) 7028-008 • Package : SCH6 • JEITA, JEDEC :• Minimum Packing Quantity : 5,000pcs./real 0.2 6 5 4 Packing Type: TL 0.2 0.25 3 0.5 0.56 1.5 0.05 2 GU LOT No. 1 Marking LOT No. 1.6 0.05 1.6 TL 1 : VCC 2 : GND 3 : LC 4 : NC 5 : GND 6 : OUT SANYO : SCH6 http://semicon.sanyo.com/en/network 30911 TKIM/22311AM TKIM TC-00002575 No. A1771-1/4 SMA4306 Recommended Operating Conditions at Ta=25°C Parameter Symbol Supply Voltage Ratings Conditions min typ VCC 3 Unit max 5 5.5 V Electrical Characteristics at Ta=25°C Parameter Symbol Circuit Current ICC Oscillating Power Posc Torerance of Oscillating Frequency fmod Ratings Conditions min VCC=5V, RL=50Ω, fosc=400MHz VCC=5V, RL=50Ω, fosc=400MHz VCC=5V, RL=50Ω, typ 29 34 39 mA 4.5 6.4 8.5 dBm 10 % --10 Specified Test Circuit (L=47nH, C=10pF) Unit max Note 1 : Oscillation frequency mainly depends on the external LC (The LC is attached additionally to the LC terminal in series). Note 2 : Recommended oscillation frequency 350MHz to 450MHz . Test Circuit SMA4306 47pF VCC GU 1000pF RF OUTPUT 10pF 47nH IT15713 Circuit Current, ICC -- mA 40 ICC -- VCC 30 25 20 15 10 5 2.5 L=47nH C=10pF 8 35 0 2.0 Posc -- VCC 10 L=47nH C=10pF Oscillating Power , Posc -- dBm 45 3.0 3.5 4.0 4.5 5.0 Supply Voltage, VCC -- V 5.5 6.0 IT16331 6 4 2 0 --2 --4 --6 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Supply Voltage, VCC -- V 5.5 6.0 IT16332 No. A1771-2/4 SMA4306 fosc -- VCC 440 430 420 410 400 390 380 370 360 350 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Supply Voltage, VCC -- V .0V 7 4.0V 6 5 3.0V 4 3 2 1 --20 0 20 40 60 80 Temperature, Temp. -- °C Oscillating Power , Posc -- dBm 9 VCC=5.0V 7 6 5 3.0V 4 3 2 1 0 --1 --2 --3 --4 1.0 2 3 5 7 10 2 Inductance, L -- nH --30 --40 --50 --60 0 1 2 3 3 4 5 7 100 IT16349 5 6 7 8 9 10 IT16334 fosc -- Temp. L=47nH C=10pF 398 396 VCC=3.0V 394 4.0V 5.0V 392 390 388 386 384 382 --20 0 20 40 60 80 Temperature, Temp. -- °C IT16335 100 IT16336 fosc -- L 1100 C=10pF 8 --20 380 --40 100 Posc -- L 10 --10 Harmonic Oscillating Frequency , fosc -- MHz 0 --40 0 400 VC C =5 8 VCC=5.0V L=47nH C=10pF IT16333 L=47nH C=10pF 9 Oscillating Power , Posc -- dBm 6.0 Posc -- Temp. 10 Harmonics 10 Harmonic Power Level, Pharmonic -- dBm L=47nH C=10pF Oscillating Frequency , fosc -- MHz Oscillating Frequency , fosc -- MHz 450 C=10pF 1000 VCC=5.0V 900 800 3.0V 700 600 500 400 300 200 1.0 2 3 5 7 10 2 Inductance, L -- nH 3 5 7 100 IT16350 No. A1771-3/4 SMA4306 Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of March, 2011. Specifications and information herein are subject to change without notice. PS No. A1771-4/4