STW13009 High voltage fast-switching NPN power transistor Features ■ Low spread of dynamic parameters ■ High voltage capability ■ Minimum lot-to-lot spread for reliable operation ■ Very high switching speed 3 Application ■ 2 1 Switch mode power supplies TO-247 Description The device is manufactured using high voltage multi-epitaxial planar technology for high switching speeds and medium voltage capability. It uses a Hollow emitter structure to enhance switching speeds. Table 1. Figure 1. Internal schematic diagram Device summary Order code Marking (1) Package Packaging TO-247 Tube W13009 L STW13009 W13009 H 1. Product is pre-selected in DC current gain (group L and group H). STMicroelectronics reserves the right to ship either groups according to production availability. Please contact your nearest STMicroelectronics sales office for delivery details. October 2007 Rev 1 1/11 www.st.com 11 Contents STW13009 Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3 Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 5 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2/11 STW13009 1 Electrical ratings Electrical ratings Table 2. Absolute maximum rating Symbol Parameter Value Unit VCEV Collector-emitter voltage (VBE = -1.5 V) 700 V VCEO Collector-emitter voltage (IB = 0) 400 V VEBO Emitter-base voltage (IC = 0) 12 V Collector current 12 A Collector peak current (tP < 5ms) 24 A Base current 6 A IBM Base peak current (tP < 5ms) 12 A Ptot Total dissipation at Tc = 25°C 125 W Tstg Storage temperature -65 to 150 °C 150 °C Value Unit 1 °C/W IC ICM IB TJ Table 3. Symbol Rthj-case Max. operating junction temperature Thermal data Parameter Thermal resistance junction-case ____M __mMax 3/11 Electrical characteristics 2 STW13009 Electrical characteristics (Tcase = 25°C unless otherwise specified) Table 4. Symbol Electrical characteristics Parameter ICEV Collector cut-off current (VBE = -1.5 V) IEBO Emitter cut-off current (IC = 0) Collector-emitter VCEO(sus) (1) sustaining voltage (IB = 0) VCE(sat) (1) VBE(sat) (1) hFE (1)(2) Collector-emitter saturation voltage Base-emitter saturation voltage DC current gain Test conditions ts Storage time tf Fall time Typ. VCE = 700 V VCE = 700 V TC = 100°C VEB = 10 V IC = 10 mA _ IC = 5 A _ _ Unit 10 500 µA µA 10 µA V IB = 0.8 A IB = 1 A IC = 8 A _ _ IB = 1.6 A IC = 12 A _ _ IB = 3 A IC = 5 A _ IB = 1 A IC = 8 A _ _ IB = 1.6 A IC = 5 A _ VCE = 5 V Group L Group H IC = 8 A _ _ IB1 = 1 A Max. 400 IC = 4 A IC = 5 A Inductive load Min. VCE = 5 V 0.85 0.9 1.25 2.5 V V V V 1.2 1.6 V V 15 28 23 36 10 30 VCC = 250 V IB2 = -2 A L = 200 µH 1.6 2.5 µs 60 110 ns see Figure 9 Inductive load ts Storage time tf Fall time IC = 5 A VCC = 125 V IB1 = - IB2 = 1.6 A L = 200 µH tc = 125 °C 2.3 µs 110 ns see Figure 9 1. Pulsed duration = 300 ms, duty cycle ≤1.5 % 2. Product is pre-selected in DC current gain (group L and group H). STMicroelectronics reserves the right to ship either groups according to production availability. Please contact your nearest STMicroelectronics sales office for delivery details. 4/11 STW13009 2.1 Electrical characteristics Electrical characteristics (curves) Figure 2. Safe operating area Figure 3. Derating curve Figure 4. DC current gain Figure 5. DC current gain Figure 6. Collector-emitter saturation voltage Figure 7. Base-emitter saturation voltage 5/11 Electrical characteristics Figure 8. 6/11 Reverse biased operating area STW13009 STW13009 3 Test circuit Test circuit Figure 9. Inductive load switching test circuit 1) Fast electronic switch 2) Non-inductive resistor 3) Fast recovery rectifier 7/11 Package mechanical data 4 STW13009 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 8/11 STW13009 Package mechanical data TO-247 Mechanical data mm. Dim. A Min. 4.85 A1 2.20 Typ Max. 5.15 2.60 b 1.0 1.40 b1 2.0 2.40 b2 3.0 3.40 c 0.40 0.80 D 19.85 20.15 E 15.45 15.75 e 5.45 L 14.20 14.80 L1 3.70 4.30 L2 18.50 øP 3.55 3.65 øR 4.50 5.50 S 5.50 9/11 Revision history 5 STW13009 Revision history Table 5. 10/11 Document revision history Date Revision 25-Oct-2007 1 Changes Initial release STW13009 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS “AUTOMOTIVE GRADE” MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 11/11