BAV19W/BAV20W/BAV21W 410mW High Voltage SMD Switching Diode Small Signal Diode SOD-123F B Features C A These diodes are also available in DO-35, LL34 Package Surface device type mounting D Moisture sensitivity level 1 Matte Tin(Sn) lead finish with Nickel(Ni) underplate E Pb free version and RoHS compliant Green compound (Halogen free) with suffix "G" on packing code and prefix "G" on date code F Mechanical Data Dimensions (mm) Unit (mm) Unit (inch) Min Max Min Terminal: Matte tin plated, solderable per MIL-STD-202, Method 208 guaranteed A 1.5 1.7 0.059 0.067 B 3.3 3.9 0.130 0.154 High temperature soldering guaranteed: 260°C/10s C 0.5 0.7 0.020 0.028 Polarity : Indicated by cathode band D 2.5 2.7 0.098 0.106 Weight : 4.85±0.5 mg E 0.8 1.15 0.031 0.045 Marking Code : H1, H2, H3 F 0.05 0.2 0.002 0.008 Case : Flat lead SOD-123F small outline plastic package Ordering Information Max Pin Configuration Part No. BAV19W Package Packing Code Packing SOD-123F RH 3K / 7" Reel Marking H1 BAV20W SOD-123F RH 3K / 7" Reel H2 BAV21W SOD-123F RH 3K / 7" Reel H3 BAV19W SOD-123F RHG 3K / 7" Reel H1 BAV20W SOD-123F RHG 3K / 7" Reel H2 BAV21W SOD-123F RHG 3K / 7" Reel H3 Suggested PAD Layout Maximum Ratings and Electrical Characteristics Rating at 25°C ambient temperature unless otherwise specified. Maximum Ratings Symbol Value Units PD 410 mW Repetitive Peak Reverse Voltage VRRM 250 V Repetitive Peak Forward Current IFRM 625 mA IO 200 mA Type Number Power Dissipation Mean Forward Current Non-Repetitive Peak Forward Surge Current Pulse width= 1μs Pulse width= 1s IFSM 4 1 A Thermal Resistance (Junction to Ambient) RθJA 375 °C/W Junction and Storage Temperature Range TJ, TSTG -65 to + 150 °C Note1. The suggested land pattern dimensions have been provided for reference only, as actual pad layouts may vary despending on application. Version : D10 BAV19W/BAV20W/BAV21W 410mW High Voltage SMD Switching Diode Small Signal Diode Electrical Characteristics Symbol Type Number BAV19W BAV20W BAV21W Reverse Breakdown Voltage (Note 2) IF= 100mA IF= 200mA BAV19W BAV20W (Note 3) BAV21W VR=0, f=1.0MHz (Note 4) Forward Voltage Reverse Leakage Current Junction Capacitance Reverse Recovery Time Min 120 200 250 - Max 1.00 1.25 Units IR - 100 nA CJ Trr - 5.0 50 pF ns Symbol K D A D1 D2 E F P0 P1 T W W1 Dimension(mm) 2.40 Max. 1.5 ± 0.1 178 ± 1 50 Min. 13.0 ± 0.5 1.75 ±0.10 3.50 ±0.05 4.00 ±0.10 2.00 ±0.10 0.6 Max. 8.30 Max. 14.4 Max V(BR) VF V V Tape & Reel specification TSC label Item Carrier depth Sprocket hole Reel outside diameter Reel inner diameter Feed hole width Sprocke hole position Punch hole position Sprocke hole pitch Embossment center Overall tape thickness Tape width Reel width Top Cover Tape Carieer Tape Any Additional Label (If Required) W1 A D2 D1 User Direction of Feed Note 2: Test Condition : IR=100μA Note 3: Test Condition : BAV19W @ V R=100V, BAV20W @ V R=150V, BAV21W @ V R=200V Note 4: Test Condition : I F=IR=30mA, RL=100Ω, IRR=3mA Note 5: A0, B0, and K0 are determined by component size. The clearance between the components and the cavity must be within 0.05 mm min. to 0.5 mm max. The component cannot rote more than 10° within the determined cavity. Note 6: If B1 exceeds 4.2 mm(0.165'') for 8 mm embossed tape, the tape may not feed through all tape feeders. Version : D10 BAV19W/BAV20W/BAV21W 410mW High Voltage SMD Switching Diode Small Signal Diode Rating and Characteristic Curves FIG 1 Admissible Power Dissipation Curve 250 Forward Current (mA) Power Dissipation (mW) FIG 2 Typical Forward Characterisics 1000 300 200 150 100 50 0 Tj=25°C 100 10 1 0.1 0.01 0 25 50 75 100 125 150 Ambient Temperature (°C) 0 1 2 Forward Voltage (V) FIG 3 Leakage Current vs Junction Temperature Leakage Current (uA) 100 10 1 0.1 0.01 0 100 200 Junction Temperature (℃) Version : D10