MBR20H100CT - MBR20H200CT CREAT BY ART Pb 20.0AMPS. Schottky Barrier Rectifiers TO-220AB RoHS COMPLIANCE Features Plastic material used carriers Underwriters Laboratory Classification 94V-0 Metal silicon junction, majority carrier conduction Low power loss, high efficiency High current capability, low forward voltage drop High surge capability For use in power supply - output rectification, power management, instrumentation Guard-ring for overvoltage protection High temperature soldering guaranteed: 260℃/10 seconds 0.25", (6.35mm) from case Green compound with suffix "G" on packing code & prefix "G" on datecode Mechanical Data Dimensions in inches and (millimeters) Cases: JEDEC TO-220AB molded plastic body Terminals: Pure tin plated, lead free, solderable per MIL-STD-750, Method 2026 MBR20HXXCT = Specific Device Code G = Green Compound Polarity: As marked Y = Year WW = Work Week Mounting position:Any Mounting torque: 5 in. - lbs, max Weight: 1.82 grams Marking Diagram Maximum Ratings and Electrical Characteristics Rating at 25 ℃ ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol MBR 20H100CT MBR 20H150CT MBR 20H200CT Units Maximum Recurrent Peak Reverse Voltage VRRM 100 150 200 V Maximum RMS Voltage VRMS 70 105 140 V Maximum DC Blocking Voltage VDC 100 150 200 V Maximum Average Forward Rectified Current IF(AV) 20 A Peak Repetitive Surge Current (Rated VR, Square Wave, 20KHz) IFRM 20 A Peak Forward Surge Current, 8.3 ms Single Half Sinewave Superimposed on Rated Load (JEDEC Method) IFSM 150 A Peak Repetitive Reverse Surge Current (Note 1) IRRM Type Number Maximum Instantaneous Forward Voltage at (Note 2) IF=10A, TA=25℃ IF=10A, TA=125℃ IF=20A, TA=25℃ IF=20A, TA=125℃ Maximum Instantaneius Reverse Current at Rated DC Blocking Voltage @ TA=25 ℃ @ TA=125 ℃ VF 1.0 0.5 0.85 0.88 0.75 0.75 0.95 0.97 V 0.85 0.85 IR A 5 uA 2 mA Voltage Rate of Change,(Rated VR) dV/dt 10,000 Maximum Typical Thermal Resistance RθJC 1.5 TJ - 65 to + 175 O C TSTG - 65 to + 175 O C Operating Junction Temperature Range Storage Temperature Range V/us O Note 1: 2.0uS Pulse Width, f=1.0KHz Note 2: Pulse Test : 300uS Pulse Width, 1% Duty Cycle Version:E11 C/W RATINGS AND CHARACTERISTIC CURVES (MBR20H100CT THRU MBR20H200CT) FIG.1- FORWARD CURRENT DERATING CURVE FIG. 2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER LEG 150 20 100 15 10 5 RESISTIVE OR INDUCTIVELOAD 0 0 25 50 75 100 125 150 75 50 25 0 175 1 CASE TEMPERATURE ( oC) FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISRICS PER LEG 10 TA=125℃ 1 TA=25℃ 0.1 PULSE WIDTH=300us 1% DUTY CYCLE 0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 10 NUMBER OF CYCLES AT 60 Hz 100 FIG. 4- TYPICAL REVERSE CHARACTERISTICS PER LEG 10 INSTANTANEOUS REVERSE A CURRENT (mA) 100 INSTANTANEOUS FORWARD A CURRENT (A) 8.3ms Single Half Sine Wave JEDEC Method 125 PEAK FORWARD SURGE A CURRENT (A) AVERAGE FORWARD A CURRENT (A) 25 1 TA=125℃ 0.1 TA=75℃ 0.01 0.001 TA=25℃ 0.0001 1.1 1.2 0 FORWARD VOLTAGE (V) 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) FIG. 6- TYPICAL TRANSIENT THERMAL IMPEDANCE PER LEG 100 FIG. 5- TYPICAL JUNCTION CAPACITANCE PER LEG TRANSIENT THERMAL IMPEDANCE(℃/W) JUNCTION CAPACITANCE (pF) A 10,000 1,000 100 10 1 0.1 0.1 1 10 REVERSE VOLTAGE (V) 100 0.01 0.1 1 10 100 T-PULSE DURATION. (sec) Version:E11