UNISONIC TECHNOLOGIES CO., LTD 2N65 Preliminary Power MOSFET 2A, 650V N-CHANNEL POWER MOSFET DESCRIPTION The UTC 2N65 is a high voltage power MOSFET and is designed to have better characteristics, such as fast switching time, low gate charge, low on-state resistance and have a high rugged avalanche characteristics. This power MOSFET is usually used at high speed switching applications in power supplies, PWM motor controls, high efficient DC to DC converters and bridge circuits. FEATURES * RDS(ON) = 5.0Ω @ VGS = 10V * Ultra Low gate charge (typical 9.0nC) * Low reverse transfer capacitance (CRSS = typical 5.0 pF) * Fast switching capability * Avalanche energy specified * Improved dv/dt capability, high ruggedness SYMBOL 2.Drain 1.Gate 3.Source ORDERING INFORMATION Ordering Number Lead Free Halogen Free 2N65L-TA3-T 2N65G-TA3-T 2N65L-TF1-T 2N65G-TF1-T 2N65L-TF3-T 2N65G-TF3-T 2N65L-TM3-T 2N65G-TM3-T 2N65L-TN3-T 2N65G-TN3-T 2N65L-TN3-R 2N65G-TN3-R Note: Pin Assignment: G: Gate D: Drain S: Source Package TO-220 TO-220F1 TO-220F TO-251 TO-252 TO-252 Pin Assignment 1 2 3 G D S G D S G D S G D S G D S G D S Packing Tube Tube Tube Tube Tube Tape Reel (1) T: Tube, R: Tape Reel 2N65L-TA3-T (1)Packing Type (2)Package Type (3)Lead Free www.unisonic.com.tw Copyright © 2011 Unisonic Technologies Co., Ltd (2) TA3: TO-220, TF1: TO-220-F1, TF3: TO-220 (2) TM3: TO-251, TN3: TO-252 (3) G: Halogen Free, L: Lead Free 1 of 6 QW-R502-370.d 2N65 Preliminary Power MOSFET ABSOLUTE MAXIMUM RATINGS (TC = 25°С, unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Drain-Source Voltage VDSS 650 V Gate-Source Voltage VGSS ±30 V Avalanche Current (Note 2) IAR 2.0 A 2.0 A Continuous ID Drain Current Pulsed (Note 2) IDM 8.0 A 140 mJ Single Pulsed (Note 3) EAS Avalanche Energy Repetitive (Note 2) EAR 4.5 mJ Peak Diode Recovery dv/dt (Note 4) dv/dt 4.5 V/ns TO-220 54 W Power Dissipation PD TO-220F/TO-220F1 23 W TO-251/TO-252 44 W Junction Temperature TJ +150 °С Operating Temperature TOPR -55 ~ +150 °С Storage Temperature TSTG -55 ~ +150 °С Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. Repetitive Rating : Pulse width limited by TJ 3. L=64mH, IAS=2.0A, VDD=50V, RG=25 Ω, Starting TJ = 25°C 4. ISD≤2.4A, di/dt≤200A/μs, VDD ≤ BVDSS, Starting TJ = 25°C THERMAL DATA PARAMETER TO-220 Junction to Ambient TO-220F/TO-220F1 TO-251/TO-252 TO-220 Junction to Case TO-220F/TO-220F1 TO-251/TO-252 SYMBOL θJA θJc UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw RATINGS 62.5 62.5 50 2.32 5.5 2.87 UNIT °С/W °С/W °С/W °С/W °С/W °С/W 2 of 6 QW-R502-370.d 2N65 Preliminary Power MOSFET ELECTRICAL CHARACTERISTICS (TJ =25°С, unless otherwise specified) PARAMETER OFF CHARACTERISTICS Drain-Source Breakdown Voltage Drain-Source Leakage Current SYMBOL TEST CONDITIONS MIN TYP MAX UNIT BVDSS IDSS VGS = 0V, ID = 250μA 650 V VDS = 650V, VGS = 0V 10 μA 100 nA Forward VGS = 30V, VDS = 0V Gate-Source Leakage Current IGSS Reverse VGS = -30V, VDS = 0V -100 nA Breakdown Voltage Temperature Coefficient △BVDSS/△TJ ID=250μA, Referenced to 25°C 0.4 V/°С ON CHARACTERISTICS Gate Threshold Voltage VGS(TH) VDS = VGS, ID = 250μA 2.0 4.0 V Static Drain-Source On-State Resistance RDS(ON) VGS = 10V, ID =1A 3.9 5.0 Ω DYNAMIC CHARACTERISTICS 270 350 pF Input Capacitance CISS VDS =25V, VGS =0V, Output Capacitance COSS 40 50 pF f =1MHz Reverse Transfer Capacitance CRSS 5 7 pF SWITCHING CHARACTERISTICS 10 30 ns Turn-On Delay Time tD (ON) Turn-On Rise Time tR 25 60 ns VDD =325V, ID =2.4A, RG=25Ω (Note 1, 2) Turn-Off Delay Time tD(OFF) 20 50 ns Turn-Off Fall Time tF 25 60 ns Total Gate Charge QG 9.0 11 nC VDS=520V, VGS=10V, Gate-Source Charge QGS 1.6 nC ID=2.4A (Note 1, 2) Gate-Drain Charge QGD 4.3 nC DRAIN-SOURCE DIODE CHARACTERISTICS Drain-Source Diode Forward Voltage VSD VGS = 0 V, ISD = 2.0 A 1.4 V Continuous Drain-Source Current ISD 2.0 A Pulsed Drain-Source Current ISM 8.0 A 180 ns Reverse Recovery Time trr VGS = 0 V, ISD = 2.4A, di/dt = 100 A/μs (Note1) Reverse Recovery Charge QRR 0.72 μC Notes: 1. Pulse Test: Pulse width ≤ 300μs, Duty cycle≤2% 2. Essentially independent of operating temperature UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 6 QW-R502-370.d 2N65 Preliminary Power MOSFET TEST CIRCUITS AND WAVEFORMS D.U.T. + VDS - + - L RG Driver VGS VDD * dv/dt controlled by RG * ISD controlled by pulse period * D.U.T.-Device Under Test Same Type as D.U.T. Peak Diode Recovery dv/dt Test Circuit VGS (Driver) Period D= P.W. P. W. Period VGS= 10V IFM, Body Diode Forward Current ISD (D.U.T.) di/dt IRM Body Diode Reverse Current Body Diode Recovery dv/dt VDS (D.U.T.) VDD Body Diode Forward Voltage Drop Peak Diode Recovery dv/dt Waveforms UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 6 QW-R502-370.d 2N65 Preliminary Power MOSFET TEST CIRCUITS AND WAVEFORMS (Cont.) VDS 90% VGS 10% tD(ON) tD(OFF) tF tR Switching Test Circuit Switching Waveforms VGS QG 10V QGS QGD Charge Gate Charge Test Circuit Gate Charge Waveform BVDSS IAS ID(t) VDS(t) VDD tp Unclamped Inductive Switching Test Circuit UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw Time Unclamped Inductive Switching Waveforms 5 of 6 QW-R502-370.d 2N65 Preliminary Power MOSFET UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 6 QW-R502-370.d