UTC-IC 9018

UNISONIC TECHNOLOGIES CO., LTD
9018
NPN EPITAXIAL PLANAR TRANSISTOR
AM/FM AMPLIFIER, LOCAL
OSCILLATOR OF FM/VHF
TUNER
„
FEATURES
1
* High Current Gain Bandwidth Product
fT =1.1GHz (Typ)
TO-92
„
ORDERING INFORMATION
Ordering Number
Package
Lead Free
Halogen Free
9018L-x-T92-B
9018G-x-T92-B
TO-92
9018L-x-T92-K
9018G-x-T92-K
TO-92
9018L-x-T92-R
9018G-x-T92-R
TO-92
Note: Pin Assignment: E: EMITTER B: BASE C: COLLECTOR
9018L-x-T92-B
(1)Packing Type
(2)Package Type
(3)Rank
(4)Lead Free
www.unisonic.com.tw
Copyright © 2011 Unisonic Technologies Co., LTD
1
E
E
E
Pin Assignment
2
B
B
B
3
C
C
C
Packing
Tape Box
Bulk
Tape Reel
(1) B: Tape Box, T: Tape Reel, R: Tape Reel
(2) T92: TO-92
(3) x: refer to Classification of Hfe
(4) G:Halogen Free, L: Lead Free
1 of 2
QW-R201-025,Ba
9018
„
NPN EPITAXIAL PLANAR TRANSISTOR
ABSOLUTE MAXIMUM RATING (TA=25℃, unless otherwise specified)
PARAMETER
SYMBOL
RATINGS
UNIT
Collector-Base Voltage
VCBO
30
V
Collector-Emitter Voltage
VCEO
15
V
Emitter-Base Voltage
VEBO
5
V
Collector Current
IC
50
mA
Collector Power Dissipation
Pc
400
mW
℃
Junction Temperature
TJ
125
℃
Operating Temperature
TOPR
-20 ~ +85
℃
Storage Temperature
TSTG
-40 ~ +150
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
„
ELECTRICAL CHARACTERISTICS (TA=25℃)
PARAMETER
Collector-Base Breakdown Voltage
Collector-Emitter Breakdown Voltage
Emitter-Base Breakdown Voltage
Collector Cut-Off Current
Collector-Emitter Saturation Voltage
DC Current Gain
Current Gain Bandwidth Product
Output Capacitance
„
SYMBOL
BVCBO
BVCEO
BVEBO
ICBO
VCE(SAT)
hFE
fT
COB
TEST CONDITIONS
IC=100uA, IE=0
IC=1mA, IB=0
IE=100uA, IC=0
VCB=12V, IE=0
IC=10mA, IB=1mA
VCE=5V, IC=1mA
VCE=5V, IC=5mA
VCB=10V, IE=0, f=1MHz
MIN
30
15
5
TYP
28
700
100
1100
1.3
MAX UNIT
V
V
V
50
nA
0.5
V
198
MHz
1.7
pF
CLASSIFICATION of hFE
RANK
RANGE
D
28-45
E
39-60
F
54-80
G
72-108
H
97-146
I
132-198
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 2
QW-R201-025,Ba