UNISONIC TECHNOLOGIES CO., LTD CD4081B Preliminary CMOS IC QUAD 2-INPUT AND BUFFERED B SERIES GATE DESCRIPTION The UTC CD4081B contains four independent 2-input AND gates,they perform the function Y=A • B in positive logic. SOP-14 FEATURES * 5V-10V-15V Parametric Ratings * Quad 2-Input AND Gate * Symmetrical Output Characteristics * Maximum Input Current of 1uA at 15V Over Full Package Temperature Rage * Low Power TTL: Fan Out of 2 Driving 74L or 1 Driving 74LS Compatibility ORDERING INFORMATION Ordering Number Lead Free Halogen Free CD4081BL-S14-R CD4081BG-S14-R www.unisonic.com.tw Copyright © 2011 Unisonic Technologies Co., Ltd Package Packing SOP-14 Tape Reel 1 of 5 QW-R502-569.a CD4081B Preliminary PIN CONFIGURATION FUNCTION TABLE (each gate) INPUT(A) H H L L INPUT(B) H L H L CMOS IC OUTPUT(Y) H L L L LOGIC DIAGRAM (positive logic) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 5 QW-R502-569.a CD4081B Preliminary CMOS IC ABSOLUTE MAXIMUM RATING(Ta=25°С, unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Supply Voltage VDD -0.5 ~ 18 V Input Voltage V(nA,nB) -0.5 ~ VDD +0.5 V Storage Temperature TSTG -65 ~ + 150 ℃ Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. RECOMMENDED OPERATING CONDITIONS PARAMETER SYMBOL VDD TOPR Supply Voltage Operating Temprature RATINGS 3 ~ 15 -40 ~ +125 UNIT V ℃ ELECTRICAL CHARACTERISTICS(Ta=25°С) PARAMETER SYMBOL TEST CONDITIONS VDD= 5.0V,VO=0.5V High VIH VDD= 10V, VO=1.0V VDD= 15V, VO=1.5V Input Voltage VDD= 5.0V,VO=4.5V Low VIL VDD= 10V, VO=9.0V VDD= 15V, VO=13.5V VDD= 5.0V, IOH=1μA High VOH VDD= 10V, IOH=1μA VDD= 15V, IOH=1μA Output Voltage VDD= 5.0V, IOL=1μA Low VOL VDD= 10V, IOL=1μA VDD= 15V, IOL=1μA VDD= 5.0V,VO=4.6V High IOH VDD= 10V, VO=9.5V VDD= 15V, VO=13.5V Output Current (Note 1) VDD= 5.0V,VO=0.4V Low IOL VDD= 10V, VO=0.5V VDD= 15V, VO=1.5V Input Leakage Current II(LEAK) VDD= 15V ,VIN = VDD or GND VDD= 5.0V,VIN = VDD or VSS, IOUT = 0 Quiescent Supply Current IQ VDD= 10V, VIN = VDD or VSS, IOUT = 0 VDD= 15V, VIN = VDD or VSS, IOUT = 0 Note: 1. IOL and IOH are tested one output at a time UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 3.5 7.0 11.0 4.95 9.95 14.95 0.51 1.3 3.4 0.51 1.3 3.4 TYP 3 6 9 2 4 6 5 10 15 0 0 0 0.88 2.25 8.8 0.88 2.25 8.8 0.004 0.005 0.006 MAX UNIT V 1.5 3.0 4.0 V V 0.05 0.05 0.05 V mA 0.1 0.25 0.5 1.0 µA µA 3 of 5 QW-R502-569.a CD4081B Preliminary SWITCHING CHARACTERISTICS(TA=25°С, Input: tR=tF=20ns,unless otherwise specified ) PARAMETER SYMBOL TEST CONDITIONS VDD=5.0V, CL=50pF, RL=200kΩ tPLH VDD=10V, CL=50pF, RL=200kΩ VDD=15V, CL=50pF, RL=200kΩ VDD=5.0V, CL=50pF, RL=200kΩ Propagation delay from Input(A or B) to Output(Y) tPHL Transition Time CMOS IC tTLH tTHL MIN VDD=10V, CL=50pF, RL=200kΩ VDD=15V, CL=50pF, RL=200kΩ VDD=5.0V, CL=50pF, RL=200kΩ VDD=10V, CL=50pF, RL=200kΩ VDD=15V, CL=50pF, RL=200kΩ TYP 120 50 35 100 40 30 90 50 40 MAX 250 100 70 250 100 70 200 100 80 UNIT TYP 5 18 MAX 7.5 UNIT ns ns OPERATING CHARACTERISTICS(Ta=25°С) PARAMETER Average Input Capacitance Power Dissipation Capacitance SYMBOL CIN CPD UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TEST CONDITIONS Any Input Any Gate MIN pF 4 of 5 QW-R502-569.a CD4081B Preliminary CMOS IC TEST CIRCUIT AND WAVEFORMS Note: CL includes probe and jig capacitance. VCC V 50% 50% 0V tPLH Vo tPHL VOH 50% 50% VOL Propagation Delay Times UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R502-569.a