UNISONIC TECHNOLOGIES CO., LTD U74LVC2G04 CMOS IC DUAL INVERTER DESCRIPTION The U74LVC2G04 is a dual inverter gate and it provides the Boolean function Y= A in positive logic. This device has power-down protective circuit to prevent the device from destruction when it is powered down. FEATURES * Operate From 1.65V To 5.5V * Inputs Accept Voltages To 5.5V * High Noise Immunity * Low Power Dissipation * Max tPD Of 3.2 ns At 5V ORDERING INFORMATION Ordering Number U74LVC2G04G-AL6-R Package SOT-363 Packing Tape Reel MARKING www.unisonic.com.tw Copyright © 2010 Unisonic Technologies Co., Ltd 1 of 5 QW-R502-393.A U74LVC2G04 CMOS IC PIN CONFIGURATION FUNCTION TABLE INPUT(nA) OUTPUT(nY) H L L H Note: H: HIGH voltage level; L: LOW voltage level. LOGIC DIAGRAM (positive logic) 1A 1Y 2A 2Y 1A 2A Logic symbol UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 1 1 1Y 2Y IEC logic symbol 2 of 5 QW-R502-393.A U74LVC2G04 CMOS IC ABSOLUTE MAXIMUM RATING PARAMETER SYMBOL VCC VIN RATINGS UNIT -0.5 ~ +6.5 V -0.5 ~ +6.5 V Active Mode -0.5 ~ VCC +0.5 V Output Voltage VOUT Power-Down Mode -0.5 ~ +6.5 V VCC or GND Current ICC ±100 mA Continuous Output Current (VOUT=0 to VCC) IOUT ±50 mA Input Clamp Current (VIN<0) IIK -50 mA Output Clamp Current (VOUT>VCC or VOUT<0 ) IOK ±50 mA Power Dissipation (TA=-40°C ~ +125°C) PD 300 mW Operating Junction Temperature TJ -40 ~ +125 °C Storage Temperature TSTG -65 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. Supply Voltage Input Voltage RECOMMENDED OPERATING CONDITIONS PARAMETER SYMBOL VCC VIN Supply Voltage Input Voltage Active Mode Power-Down Mode VCC=1.65V to 2.7V VCC=2.7V to 5.5V Output Voltage Input Transition Rise or Fall Rate VOUT tR / tF MIN 1.65 0 0 0 0 0 TYP MAX 5.5 5.5 VCC 5.5 20 10 UNIT V V V V ns/V ns/V TYP MAX ±0.1 ±0.1 0.1 0.45 0.3 0.4 0.55 0.55 ±5 ±10 UNIT V V V V V V V V V V V V V V V V V V V V μA μA 0.1 10 μA 5 500 μA ELECTRICAL CHARACTERISTICS (TA =25°C , unless otherwise specified) PARAMETER High-level Input Voltage Low-level Input Voltage High-Level Output Voltage Low-Level Output Voltage Input Leakage Current Power OFF Leakage Current Quiescent Supply Current Additional Quiescent Supply Current Per Input Pin SYMBOL VIH VIL VOH VOL II(LEAK) IOFF IQ ΔICC TEST CONDITIONS VCC=1.65V ~ 1.95V VCC=2.3V ~ 2.7V VCC=2.7V ~ 3.6V VCC=4.5V ~ 5.5V VCC=1.65V ~ 1.95V VCC=2.3V ~ 2.7V VCC=2.7V ~ 3.6V VCC=4.5V ~ 5.5V IOH=-100μA VCC=1.65 ~ 5.5V IOH=-4mA VCC=1.65V IOH=-8mA VCC=2.3V IOH=-12mA VCC=2.7V IOH=-24mA VCC=3.0V VCC=4.5V IOH=-32mA IOL=100μA VCC=1.65 ~ 5.5V IOL=4mA VCC=1.65V IOL=8mA VCC=2.3V IOL=12mA VCC=2.7V IOL=24mA VCC=3.0V IOL=32mA VCC=4.5V VIN=5.5V or GND, VCC=5.5V VIN or VOUT=5.5V, VCC=0V VIN=VCC or GND, IOUT=0 VCC=5.5V VCC=2.3 ~ 5.5V, One input at VCC-0.6V, Other inputs at VCC or GND UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 0.65*VCC 1.7 2 0.7*VCC 0.35*VCC 0.7 0.8 0.3*VCC VCC-0.1 1.2 1.9 2.2 2.3 3.8 3 of 5 QW-R502-393.A U74LVC2G04 CMOS IC SWITCHING CHARACTERISTICS (TA=25°С) PARAMETER SYMBOL Propagation delay from input (A) to output(Y) tPLH tPHL TEST CONDITIONS VCC=1.8±0.15V, RL=1KΩ VCC=2.5±0.2V, RL=500Ω VCC=2.7V, RL=500Ω VCC=3.3±0.3V, RL=500Ω VCC=5±0.5V, RL=500Ω UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw CL=30pF CL=50pF MIN 1.0 1.0 1.0 0.5 1.0 TYP 3.5 2.2 2.7 2.7 1.9 MAX 8.0 4.4 5.2 4.1 3.2 UNIT ns ns ns ns ns 4 of 5 QW-R502-393.A U74LVC2G04 CMOS IC TEST CIRCUIT AND WAVEFORMS Inputs VCC 1.8V±0.15V 2.5V±0.2V 2.7V 3.3V±0.3V 5V±0.5V VIN VCC tR, tF ≤2ns VCC 2.7V 2.7V VCC ≤2ns ≤2.5ns ≤2.5ns ≤2.5ns VM CL RL VCC/2 VCC/2 1.5V 1.5V VCC/2 30pF 30pF 50pF 50pF 50pF 1KΩ 500Ω 500Ω 500Ω 500Ω Note: CL includes probe and jig capacitance. All input pulses are supplied by generators having the following characteristics: PRR ≤10MHz, Zo = 50Ω. UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R502-393.A