UNISONIC TECHNOLOGIES CO., LTD U74LVC2G06 CMOS IC INVERTERS WITH OPEN-DRAIN OUTPUTS DESCRIPTION The U74LVC2G06 is a dual inverting gate CMOS with open drain output and provides the Boolean function Y= A in positive logic device. This device has a power-down protective circuit to prevent the device from destruction when it is powered down. FEATURES * Operate From 1.65V to 5.5V * Inputs Accept Voltages to 5.5V * High Noise Immunity * Low Power Dissipation * Direct Interface with TTL Level ORDERING INFORMATION Ordering Number U74LVC2G06G-AL6-R Package SOT-363 Packing Tape Reel MARKING www.unisonic.com.tw Copyright © 2010 Unisonic Technologies Co., Ltd 1 of 5 QW-R502-396.A U74LVC2G06 CMOS IC PIN CONFIGURATION FUNCTION TABLE INPUT(nA) OUTPUT(nY) H L L Z Note: H: HIGH voltage level; L: LOW voltage level; Z: High impedance OFF-state. LOGIC DIAGRAM (positive logic) 1A 1Y 2A 2Y 1A 1Y 2A 2Y Logic symbol UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw IEC logic symbol 2 of 5 QW-R502-396.A U74LVC2G06 CMOS IC ABSOLUTE MAXIMUM RATING PARAMETER SYMBOL VCC VIN RATINGS UNIT -0.5 ~ +6.5 V -0.5 ~ +6.5 V Active mode -0.5 ~ +6.5 V Output Voltage VOUT Power-down mode -0.5 ~ +6.5 V VCC or GND Current ICC ±100 mA Continuous Output Current (VOUT=0 to VCC) IOUT ±50 mA Input Clamp Current (VIN<0) IIK -50 mA Output Clamp Current (VOUT>VCC or VOUT<0) IOK ±50 mA Power Dissipation (TA=-40°C ~ +125°C) PD 300 mW Storage Temperature Range TSTG -65 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. Supply Voltage Input Voltage RECOMMENDED OPERATING CONDITIONS PARAMETER Supply Voltage Input Voltage SYMBOL VCC VIN Output Voltage VOUT Operating Temperature Active mode Power-down mode TA Input Transition Rise or Fall Rate TEST CONDITIONS tR / t F VCC=1.65V to 2.7V VCC=2.7V to 5.5V MIN 1.65 0 0 0 -40 0 0 TYP MAX 5.5 5.5 VCC 5.5 125 20 10 UNIT V V V V °C ns/V ns/V TYP MAX ±0.1 ±0.1 0.1 0.45 0.3 0.4 0.55 0.55 ±5 ±10 UNIT V V V V V V V V V V V V V V μA μA ±0.1 ±10 μA 0.1 10 μA 5 500 μA ELECTRICAL CHARACTERISTICS (TA =25°C , unless otherwise specified) PARAMETER High-Level Input Voltage Low-Level Input Voltage Low-Level Output Voltage Input Leakage Current Power OFF Leakage Current 3-state Output OFF-state Current Quiescent Supply Current Additional Quiescent Supply Current Per Input Pin SYMBOL VIH VIL VOL II(LEAK) IOFF IOZ IQ ΔICC TEST CONDITIONS VCC=1.65V ~ 1.95V VCC=2.3V ~ 2.7V VCC=2.7V ~ 3.6V VCC=4.5V ~ 5.5V VCC=1.65V ~ 1.95V VCC=2.3V ~ 2.7V VCC=2.7V ~ 3.6V VCC=4.5V ~ 5.5V IOL=100μA VCC=1.65 ~ 5.5V IOL=4mA VCC=1.65V IOL=8mA VCC=2.3V IOL=12mA VCC=2.7V IOL=24mA VCC=3.0V VCC=4.5V IOL=32mA VIN=5.5V or GND, VCC=5.5V VIN or VOUT=5.5V, VCC=0V VIN= VIH or VIL, VOUT=VCC or GND, VCC=5.5V VIN=VCC or GND, IOUT=0 VCC=5.5V VCC=2.3 ~ 5.5V, One input at VCC-0.6V, Other inputs at VCC or GND UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 0.65*VCC 1.7 2 0.7*VCC 0.35*VCC 0.7 0.8 0.3*VCC 3 of 5 QW-R502-396.A U74LVC2G06 CMOS IC SWITCHING CHARACTERISTICS (TA=25°С) PARAMETER SYMBOL Propagation delay from input (A) to output(Y) tPLZ / tPZL TEST CONDITIONS VCC=1.8±0.15V, RL=1KΩ CL=30pF VCC=2.5±0.2V, RL=500Ω VCC=2.7V RL=500Ω, VCC=3.3±0.3V CL=50pF VCC=5±0.5V UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 1.0 0.5 1.0 0.5 0.5 TYP 3.2 2.0 2.6 2.3 1.6 MAX 6.5 3.9 4.2 3.4 2.9 UNIT ns ns ns ns ns 4 of 5 QW-R502-396.A U74LVC2G06 CMOS IC TEST CIRCUIT AND WAVEFORMS VLOAD From Output RL CL RL Inputs VCC 1.8V±0.15V 2.5V±0.2V 2.7V 3.3V±0.3V 5V±0.5V VIN VCC tR, tF ≤2ns VCC 2.7V 2.7V VCC ≤2ns ≤2.5ns ≤2.5ns ≤2.5ns VM VLOAD VΔ CL RL VCC/2 VCC/2 1.5V 1.5V VCC/2 2 x VCC 2 x VCC 6V 6V 2 x VCC 0.15V 0.15V 0.3V 0.3V 0.3V 30pF 30pF 50pF 50pF 50pF 1KΩ 500Ω 500Ω 500Ω 500Ω Note: CL includes probe and jig capacitance. All input pulses are supplied by generators having the following characteristics: PRR ≤10MHz, Zo = 50Ω. UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R502-396.A