UTC-IC US104S

UNISONIC TECHNOLOGIES CO., LTD
US104S/N
SCR
SCRS
„
DESCRIPTION
Thanks to highly sensitive triggering levels, the UTC US104S
is suitable for all applications where the available gate current is
limited, such as motor control for hand tools, kitchen aids,
overvoltage crowbar protection for low power supplies, ...
Available in through-hole or surface-mount packages, they
provide an optimized performance in a limited space area.
„
SYMBOL
„
ORDERING INFORMATION
Order Number
Lead Free
Halogen Free
US104SL-4-TA3-T
US104SG-4-TA3-T
US104SL-6-TA3-T
US104SG-6-TA3-T
US104SL-8-TA3-T
US104SG-8-TA3-T
US104NL-4-TA3-T
US104NG-4-TA3-T
US104NL-6-TA3-T
US104NG-6-TA3-T
US104NL-8-TA3-T
US104NG-8-TA3-T
Note: Pin Assignment: K: Cathode G: Gate A: Anode
www.unisonic.com.tw
Copyright © 2011 Unisonic Technologies Co., Ltd
Package
TO-220
TO-220
TO-220
TO-220
TO-220
TO-220
1
K
K
K
K
K
K
Pin Assignment
2
3
A
G
A
G
A
G
A
G
A
G
A
G
Packing
Tube
Tube
Tube
Tube
Tube
Tube
1 of 3
QW-R301-011.Da
US104S/N
„
SCR
ABSOLUTE MAXIMUM RATING
PARAMETER
SYMBOL
RATINGS
UNIT
US104S/N-4
400
Repetitive Peak Off-State Voltages And
VDRM,
V
US104S/N-6
600
Repetitive Peak Reverse Voltage
VRRM
US104S/N-8
800
RMS On-State Current (180° Conduction Angle) (TC = 115℃)
IT(RMS)
4
A
Average On-State Current (180° Conduction Angle) (TC = 115℃)
IT(AV)
2.5
A
33
Non Repetitive Surge Peak On-State Current tP=8.3ms
ITSM
A
(TJ= 25℃)
tP=10ms
30
I²t Value For Fusing (tP = 10 ms, TJ = 25℃)
I²t
4.5
A²S
Critical Rate Of Rise Of On-State Current
dI/dt
50
A/µs
(IG = 2 x IGT , tr ≤ 100 n s, F= 60 Hz ,TJ = 125℃)
Peak Gate Current (tP=20μs, TJ = 125℃)
IGM
1.2
A
Average Gate Power Dissipation (TJ = 125℃)
PG(AV)
0.2
W
Storage Temperature
TSTG
-40 ~ +150
℃
Junction Temperature
TJ
-40 ~ +125
℃
Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. The device is guaranteed to meet performance specification within 0℃~70℃ operating temperature range
and assured by design from –20℃~85℃.
„
THERMAL DATA
PARAMETER
Junction to Case
Junction to Ambient
„
SYMBOL
θJA
θJC
RATINGS
60
3.0
UNIT
K/W
K/W
UTC US104S(SENSITIVE) ELECTRICAL CHARACTERISTICS
(TJ=25℃, unless otherwise specified)
PARAMETER
SYMBOL
Gate Trigger Current
IGT
Gate Trigger Voltage
VGT
Gate Non-Trigger Voltage
VGD
Reverse Gate Voltage
Holding Current
Latching Current
Circuit Rate Of Change Of
off-State Voltage
On-State Voltage
Threshold Voltage
Dynamic Resistance
VRG
IH
IL
Off-State Leakage Current
TEST CONDITIONS
VD = 12 V, RL =33Ω
VD = 12 V, RL=33Ω
VD = VDRM, RL = 3.3kΩ
RGK = 220 TJ = 125℃
IRG = 10 µA
IT = 50mA, RGK = 1kΩ
IG = 1mA , RGK = 1kΩ
dV/dt
VD=67% VDRM ,RGK = 220Ω, TJ= 125℃
VTM
Vt0
Rd
IDRM
IRRM
ITM = 8 A, tP = 380 µs, TJ = 25℃
TJ = 125℃
TJ = 125℃
VDRM = VRRM, RGK = 220Ω, TJ= 25℃
VDRM = VRRM, RGK = 220Ω, TJ = 125℃
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN
TYP
MAX UNIT
200
mA
0.8
V
0.1
V
8
5
6
5
V
mA
mA
V/µs
1.6
0.85
90
5
1
V
V
mΩ
µA
mA
2 of 3
QW-R301-011.Da
US104S/N
„
SCR
UTC US104N(SENSITIVE) ELECTRICAL CHARACTERISTICS
(TJ=25℃, unless otherwise specified)
PARAMETER
SYMBOL
Gate Trigger Current
IGT
Gate Trigger Voltage
VGT
Gate Non-Trigger Voltage
VGD
Holding Current
IH
Latching Current
IL
Circuit Rate Of Change Of
dV/dt
off-State Voltage
On-State Voltage
VTM
Threshold Voltage
Vt0
Dynamic Resistance
Rd
IDRM
Off-State Leakage Current
IRRM
TEST CONDITIONS
VD = 12 V, RL =33Ω
VD = 12 V, RL=33Ω
VD = VDRM, RL = 3.3 kΩ, TJ = 125℃
IT = 100 mA Gate open
IG = 1.2 IGT
MIN
2
VD = 67 % VDRM Gate open, TJ= 125℃
100
ITM = 8A, tP = 380 µs, TJ = 25℃
TJ = 125℃
TJ = 125℃
VDRM = VRRM, TJ= 25℃
VDRM = VRRM, TJ = 125℃
0.2
TYP
MAX UNIT
15
µA
1.3
V
V
30
mA
60
mA
V/µs
1.6
0.85
62
5
2
V
V
mΩ
µA
mA
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 3
QW-R301-011.Da