UNISONIC TECHNOLOGIES CO.,LTD. XL/ML1225 SCR MEDIUM POWER LOW VOLTAGE TRANSISTOR DESCRIPTION The XL1225/ML1225 silicon controlled rectifiers are high performance planner diffused PNPN devices. These parts are intended for low cost high volume applications. ORDERING INFORMATION Ordering Number Lead Free Halogen Free XL1225G-xx-AE3-R XL1225L-xx-T92-B XL1225G-xx-T92-B XL1225L-xx-T92-K XL1225G-xx-T92-K ML1225G-xx-AE3-R ML1225L-xx-T92-B ML1225G-xx-T92-B ML1225L-xx-T92-K ML1225G-xx-T92-K Note: Pin Assignment : G: Gate K: Cathode A: Anode Package SOT-23 TO-92 TO-92 SOT-23 TO-92 TO-92 Pin Assignment 1 2 3 G K A K G A K G A G K A K G A K G A Packing Tape Reel Tape Box Bulk Tape Reel Tape Box Bulk MARKING Package MARKING XL1225 SOT-23 ML1225 L25G TO-92 www.unisonic.com.tw Copyright © 2014 Unisonic Technologies Co.,LTD. 1 of 3 QW-R301-003.G XL/ML1225 SCR ABSOLUATE MAXIUM RATINGS (Ta= 25C, unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT XL1225 400 Repetitive Peak Off-State Voltage VDRM V (TJ =40 ~ 125C, RGK =1kΩ ) ML1225 300 On-State Current (Tc=40C) IT(RMS) 0.8 A Average On-State Current (Half Cycle=180,Tc=40C) IT(AV) 0.5 A Peak Reverse Gate Voltage (IGR=10A) VGRM 1 V Peak Gate Current (10s Max.) IGM 0.1 A Gate Dissipation (20ms Max.) PG(AV) 150 mW Junction Temperature TJ +125 C Storage Temperature TSTG -40 ~ +150 C Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. The device is guaranteed to meet performance specification within 0℃~70℃ operating temperature range and assured by design from –20C ~85C. ELECTRICAL CHARACTERISTICS (Ta= 25C, unless otherwise specified.) PARAMETER Off State Leakage Current Off State Leakage Current SYMBOL TEST CONDITIONS IDRM VDRM(RGK=1KΩ), TJ =125C IDRM VDRM(RGK=1KΩ), TJ =25C AT IT=0.4A VT AT IT=0.8A VT(TO) TJ =125C Rt TJ =125C IGT VD=7V VGT VD=7V IH RGK=1KΩ IL RGK=1KΩ DV/DT VD=0.67×VDRM(RGK=1KΩ),TJ =125C DV/DT IG=10mA, dIG/dt=0.1A/μs,TJ =125C TGD IG=10mA, dIG/dt=0.1A/μs TJ =85C, VD=0.67*VDRM, VR=35V, TG IT=IT(AV) On State Voltage On State Threshold Voltage On State Slops Resistance Gate Trigger Current Gate Trigger Voltage Holding Current Latching Current Critical Rate of Voltage Rise Critical Rate of Current Rise Gate Controlled Delay Time Commutated Turn-off Time MIN TYP MAX UNIT 0.1 mA 1.0 μA 1.4 V 2.2 0.95 V 600 m 200 μA 0.8 V 5 mA 6 mA V/μs A/μs 2.2 μs 200 μs CLASSIFICATION OF IGT RANK RANGE B 50-100 C 100-200 AA 8-15 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw AB 15-20 AC 20-25 AD 25-50 2 of 3 QW-R301-003.G XL/ML1225 ■ SCR TYPICAL CHARACTERICS IT,INSTANTANEOUS ON-STATE CURRENT (A) 10 MAXIMUM @Tj=25℃ 1 0.1 0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5 VT,INSTANTANEOUS ON-STATE VOLTAGE (V) Figure 5. Typical On-State Characteristics UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R301-003.G