Hi-Rel VCXO 5116 Typical Applications Features Mil/Space Applications Satellite Applications Rad Hard Environments 9x14 J Leaded Surface Mount Package 4 Point Crystal Mount / Swept Quartz 3 Class S Screening IAW MIL-PRF-55310 100 krad Total Dose Radiation Tolerance 3 Nominal Frequency Range: 1 to 85 MHz Operating Temperature Range Parameter Operating Temperature Range Min Max. Units -0 Typ +70 °C Condition Ordering Code C -20 +70 °C D -40 +85 °C F Supply voltage (Vs) Parameter Min Typ Max. Units Supply voltage 4.75 5 5.25 VDC 15 mA 1.0 to 23.9 MHZ 20 mA 24 to 49.9 MHz 40 mA 50 to 85.0 MHz 3.465 VDC 6 mA Current consumption (no load) 3.135 Supply voltage 3.3 Current consumption (no load) Condition Ordering Code SV050 SV033 1.0 to 14.9 MHZ 8 mA 15.0 TO 39.9 MHz 12 mA 40.0 TO 59.9 MHz 16 mA 60.0 TO 85.0 MHz Max. Units RF output Parameter Signal Load Min Typ Condition ACMOS 15 Signal Level (Vol) Signal Level (Voh) 50 pF 0.5 0.3 VDC VDC VDC VDC ns ns % % 4.5 3.0 Rise and fall times for ACMOS (measured 10% to 90%) Duty cycle 10 5 55 60 45 40 Ordering Code RFA Vs= 5.0V and 15pF load Vs=3.3V and 15pF load Vs= 5.0V and 15pF load Vs=3.3V and 15pF load 1.0 to 23.9 MHz 24.0 to 85.0 MHz @ 50% Vs < 15 MHz @ 50% Vs > 15 MHz Frequency Tuning (EFC) 1 Parameter Absolute Pull Range Min ±30 Typ Max. 10 15 % 4.5 3.0 VDC VDC ±50 Linearity Units ppm Condition ppm Tuning Slope Ordering Code AP030 AP050 Positive Control Voltage Range Vectron International 0.5 0.3 2.5 1.65 100 Watts Street Mount Holly Springs PA 17065 t 717 486 3411 f 717 486 5920 with Vs=5.0VDC with Vs=3.3VDC www.vectron.com 9/5/06 SEM 1/3 Hi-Rel VCXO 5116 Screening level Parameter Class S Screening Class B Screening Engineering Model Condition IAW MIL-PRF-55310 IAW MIL-PRF-55310 No Screening Ordering Code S B X Additional parameters Parameter Phase Noise 2 (measured at 52 MHz) Min Typ -60 -90 -120 -140 -145 <2 Weight Max. Units dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz g Condition 10 100 1 10 100 Hz Hz kHz kHz kHz Absolute Maximum Ratings Parameter Supply voltage (Vs) Min Operable temperature range Storage temperature range -55 -55 Typ Max. 7.0 Units V +85 +125 °C °C Condition Enclosure Type A - ACMOS Ordering Codes A1 = 4 leads 5 T= Tinned J leads X = No Tinning 4 Maximum Height Maximum Stand-off 0.188 max (4.77) 0.043 max (1.09) Pin Connections 1 2 3 4 Control Voltage Case Ground RF Output Supply Voltage Vectron International 100 Watts Street Mount Holly Springs PA 17065 t 717 486 3411 f 717 486 5920 www.vectron.com 9/5/06 SEM 2/3 Hi-Rel VCXO 5116 How to Order this Product: 6 Step 1 Use this worksheet to forward the following information to your factory representative (example follows): Model Operating Temperature Code Supply Voltage Code RF Output Code Frequency Tuning Code Screening Code Package Code Tinning Code C5116 F SV033 RFA AP030 S A1 T Step 2 The factory representative will then respond with a Vectron Part Number in the following configuration: Model Package Code Dash Dash Number C5116 [Customer Specified Package Code] - [Factory Generated 4 digit number] Typical P/N: C5116A1-0001 Notes: 1 Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C) 2 Phase noise degrades with increasing output frequency. 3 Flight models will be manufactured with swept quartz and Class S die; engineering models will be manufactured with cultured quartz and commercial grade components. 4 When requested, leads tinned per Vectron International standard procedure (GR-37409) 5 Contact factory for other options. 6 Please be sure to specify nominal frequency. Vectron International 100 Watts Street Mount Holly Springs PA 17065 t 717 486 3411 f 717 486 5920 www.vectron.com 9/5/06 SEM 3/3