FX-401 Frequency Controlled Crystal Oscillator Features Process Compatible Reflow Surface Mount Package Low Phase Noise Build in PLL-Circuit Typical Applications Base Stations Previous Vectron Model Number C3430 Output Frequency Range 10 MHz – 700 MHz Standard Frequencies 10; 25; 26; 39.3216; 52; 56; 61.44;77.76; 104; 122.88 MHz 153.6; 155.52; 160; 184.32; 311.04; 491.52; 622.08 MHz Reference Frequency Min 1 Standard input frequencies Signal Typ Max Units Condition 300 MHz ± 2 ppm 10 MHz 13 MHz 26 MHz 32,768 MHz Options5 Parameter Input frequency HCMOS Reference Level 0.5 Reference Input Impedance 2 4 Vpp HCMOS / similar sinewave kΩ htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 FX-401 page: 1/8 Parameter Reference Frequency Min Typ Signal Max Units Condition PECL Reference Level Min 1.355 1.68 V Reference Level Max 2.155 2.42 V Reference Input Impedance Ω 50 Signal LVPECL LVDS Reference Level Min -0.45 -0.25 V Reference Level Max 0.25 0.45 V Reference Input Impedance Ω 100 LVDS Output Frequency Parameter Min Output frequency 10 Typ Signal Max Units 700 MHz Condition HCMOS Load 15.0 pF Rise and Fall time Duty cycle 40 Signal 5 ns @ 15 pF 10 to 90 % 60 % @ Vs/2 Ω Vs - 2V 1 ns 20 to 80 % 55 % PECL Load 50 Rise and Fall time Duty cycle 45 Signal LVDS Load 100 Rise and Fall time Duty cycle 40 Ω 1 ns 60 % 10 to 90 % Supply Voltage (Vs) Parameter Min Typ Max Units Supply voltage [Standard] 3.135 3.3 3.465 VDC 50 mA steady state @ +25°C & 3.3VDC Units Condition Current consumption Parameter Phase Noise Jitter Additional Parameters Min 3 Condition Typ Max -95 dBc/Hz 10 Hz @ 10 MHz -125 dBc/Hz -142 dBc/Hz 100 Hz HCMOS 1 kHz -155 dBc/Hz 10 kHz -160 dBc/Hz 100 kHz 0.7 Ps RMS @ 10Hz .. 100kHz htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 FX-401 page: 2/8 Parameter Additional Parameters Min Phase Noise3 Jitter VCXO Control PIN 7 Typ Units dBc/Hz 10 Hz @ 311.04 MHz -105 dBc/Hz 100 Hz PECL -130 dBc/Hz 1 kHz -140 dBc/Hz 10 kHz -142 dBc/Hz 100 kHz 0.2 Ps RMS Weight 2,5 V 9 g @ 12kHz .. 20MHz Handling & processing note Operating temperature range -20 +70 °C Operating temperature range -30 +85 °C Storage temperature range -55 +125 °C Parameter Conditions -75 0,5 Processing & Packing Max Absolute Maximum Ratings Min Typ Max Units Supply voltage (Vs) 6.0 V Maximum output load @ CMOS 40 pF Condition htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 FX-401 page: 3/8 Enclosure Type G233 “A” Input : Single ended (HCMOS or Sinewave) Output : 1x HCMOS or PECL or LVDS Type G273 “B” Input : Complementary (PECL or LVDS) Output : 1x PECL or LVDS Pin Length “L” 5.9 NA Height “H” Pin Length “L” 5.9 NA Dimensions : mm Pin Connections Dimensions : mm Description 1 VCXO Control Test output of the control voltage for the VCXO Only for modul test or observance 2 Lock Detector Output Test output signal for PLL lock detected. High signal PLL in lock Low signal PLL out of lock Only for modul test or observance Options5 Height “H” Options5 Package Codes : Pin Connections Description VCXO Control Test output of the control voltage for the VCXO Only for modul test or observance 2 Lock Detector Output Test output signal for PLL lock detected. High signal PLL in lock Low signal PLL out of lock Only for modul test or observance 3 N.C. 5 GND 1 6;7 GND Ground connection. Keep traces physically short and connect immediately to ground plane for best performance 6;7 GND Ground connection. Keep traces physically short and connect immediately to ground plane for best performance 8 RF-OUT RF syncronised output. 8 RF-OUT RF syncronised output. 9 RF-Out complementary / (GND: Single ended input only) 9 RF-Out complementary RF syncronised output. 13 14 Ref. Frequency in Vs RF syncronised output. Ground connection: Single Ended Input only 10 GND 12 Ref. Frequency Complementary in High stable input frequency for syncronisation 13 Ref. Frequency in Power supply pin 14 Vs High stable complementary input frequency for syncronisation High stable input frequency for syncronisation Power supply pin htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 FX-401 page: 4/8 Enclosure Type G273 “C” Input : Single ended (HCMOS or Sinewave) Output : 2x PECL or LVDS Type G267 “D” Input : Single ended (HCMOS or Sinewave) Output : 4x HCMOS (same frequency) Pin Length “L” 5.9 NA Height “H” Pin Length “L” 5.9 NA Dimensions : mm Dimensions : mm Pin Connections Options5 Height “H” Options5 Package Codes : Description Pin Connections Description 1 VCXO Control Test output of the control voltage for the VCXO Only for modul test or observance 1 VCXO Control Test output of the control voltage for the VCXO Only for modul test or observance 2 Lock Detector Output Test output signal for PLL lock detected. High signal PLL in lock Low signal PLL out of lock Only for modul test or observance 2 Lock Detector Output Test output signal for PLL lock detected. High signal PLL in lock Low signal PLL out of lock Only for modul test or observance 5 RF-OUT 1 4 independent RF syncronised outputs 3 N.C. 5 GND 6 RF-OUT 1 RF output frequency 1 6 GND Ground connection. Keep traces physically short and connect immediately to ground plane for best performance 7 Compl. RF-OUT 1 Complimentary RF output frequency 1 7 RF-OUT 2 4 independent RF syncronised outputs 8 RF-OUT 2 RF output frequency 2 8 RF-OUT 3 4 independent RF syncronised outputs 9 Compl. RF-OUT 2 Complimentary RF output frequency 2 9 GND 10 GND 10 RF-OUT 4 4 independent RF syncronised outputs 12 N.C. 13 Ref. Frequency in High stable input frequency for syncronisation 13 Ref. Frequency in High stable input frequency for syncronisation 14 Vs Power supply pin 14 Vs Power supply pin htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 FX-401 page: 5/8 Enclosure Marking FX-401 Frequency ● AYYWW Typical Phase Noise and Jitter (10 MHz; HCMOS output) (311,04 MHz; PECL output) Frequency range [Hz] Jitter [ps rms] Frequency range [Hz] Jitter [ps rms] 10Hz to 100kHz 0.708ps 12kHz to 20MHz 0.168ps Block Diagramm VS VCXO Control 1 VS PLL Circuit VS 4 Loop Filter VCXO 8 5 Reference Frequency VCXO 0 VS 5 VCXO 4 0 1 8 0 Lock Detector htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 FX-401 page: 6/8 Standard Shipping Methode (For B-Type Enclosure) Lage im Gurt Position in tape Pin 1 A Abwickelrichtung Unwinding direction X B P Gurtunterseite Tape buttom side K Gurtoberseite Tape upper side *bei W ≤ 24 mm nur untere Lochreihe ∗by W ≤ 24 mm only lower hole line Production tolerance complying DIN IEC 286-3 Enclosure Type Tape width W [mm] Quantity per meter Quantity per reel Dimension P G194B tbd tbd tbd tbd Recommanded Reflow Profile Profile Feature Pb-Free Assembly/ Sn-Pb Assembly Profile Feature Pb-Free Assembly/ Sn-Pb Assembly Average ramp-up rate (TL to Tp) 3°C/second max. Time 25°C to Peak Temperature 8 minutes max. 150°C 200°C 60-180 seconds Time maintainted above -Temperature (TL) -Time (tL) 217°C 60-150 seconds Preheat -Temperature Min Tsmin -Temperature Min Tsmax -Time (min to max)(ts) Tsmax to TL-Ramp-up Rate 3°C/second max Time maintainted above -Temperature (TL) -Time (tL) 217°C 60-150 seconds Time within 5°C of actual Peak Temperature (tP) 20-40 seconds Peak Temperature (TP) max 260°C Ramp-down Rate 6°C/ second max Note: All temperatures refer to topside of the package, measured on the package body surface. SMD oscillators must be on the top side of the PCB during the reflow process. htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 FX-401 page: 7/8 How to order this product: Use this worksheet to forward the following information to your factory representative: Model Height - Supply Voltage Code RF Output Code Temperature Range - FX-401 1 - E A J - Height: 1: A 5,9 mm RF Output Code: 2: B 5,9 mm Supply Voltage Code: E: 3,3 V A: HCMOS 3: C 5,9 mm C: PECL 4: D 5,9 mm D: LVDS Reference Frequency - Output Frequency - Temperature Range: H: -30...+85°C J: -20...+70°C htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 FX-401 page: 8/8