KSP2222A tm NPN General Purpose Amplifier Features • Collector-Emitter Voltage: VCEO= 40V • Collector Power Dissipation: PC (max)=625mW • Available as PN2222A TO-92 1 2 3 1. Emitter 2. Base 3. Collector Absolute Maximum Ratings * T a Symbol VCBO VCEO VEBO IC TJ Tstg = 25°C unless otherwise noted Parameter Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Collector current Junction Temperature Storage Temperature Value Units 75 40 6.0 600 +150 -55 ~ +150 V V V mA °C °C * 1. These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. 2. These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. Thermal Characteristics T =25°C unless otherwise noted a Symbol PC RθJC RθJA Parameter Collector Power Dissipation, by RθJA Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient Electrical Characteristics * T a Symbol V(BR)CBO V(BR)CEO V(BR)EBO ICBO IEBO hFE Max Units 625 83.3 200 mW °C/W °C/W = 25°C unless otherwise noted Parameter Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage Collector Cutoff Current Emitter Cutoff Current DC Current Gain VCE(sat) Collector-Emitter Saturation Voltage VBE(sat) Base-Emitter Saturation Voltage fT Cobo tON Current Gain Bandwidth Product Output Capacitance Turn On Time tOFF Turn Off Time NF Noise Figure Test Condition Min. IC = 10µA, IE = 0 IC = 10mA, IB = 0 IE = 10µA, IC = 0 VCB = 60V, IE = 0 VEB = 3.0V, IC = 0 VCE = 10V, IC = 0.1mA, VCE = 10V, IC = 1mA, VCE = 10V, IC = 10mA, VCE = 10V, IC = 150mA, VCE = 10V, IC = 500mA, IC = 150mA, IB = 15mA IC = 500mA, IB = 50mA IC = 150mA, IB = 15mA IC = 500mA, IB = 50mA IC = 20mA, VCE = 20V, f = 100MHz VCB = 10V, IE = 0, f = 1.0MHz VCC= 30V, IC = 150mA, IB1= 15mA, VBE(off)= 0.5V VCC= 30V, IC = 150mA, IB1= IB1 = 15mA IC = 100µA, VCE= 10V, RS= 1KΩ , f = 1.0KHz 75 40 6.0 Typ. 35 50 75 100 40 Max. Units 0.01 10 V V V µA nA 300 0.6 0.3 1 1.2 2.0 8 35 V V V V MHz pF ns 285 ns 4 dB 300 * DC Item are tested by Pulse Test : Pulse Width≤300us, Duty Cycle≤2% ©2006 Fairchild Semiconductor Corporation KSP2222A Rev. B 1 www.fairchildsemi.com KSP2222A NPN General Purpose Amplifier July 2006 KSP2222A NPN General Purpose Amplifier Package Dimensions TO-92 +0.25 4.58 ±0.20 4.58 –0.15 ±0.10 14.47 ±0.40 0.46 1.27TYP [1.27 ±0.20] (0.25) +0.10 0.38 –0.05 0.38 –0.05 ±0.20 3.86MAX 3.60 1.02 ±0.10 +0.10 1.27TYP [1.27 ±0.20] (R2.29) Dimensions in Millimeters 2 KSP2222A Rev. B www.fairchildsemi.com TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. FACT Quiet Series™ GlobalOptoisolator™ GTO™ HiSeC™ I2C™ i-Lo™ ImpliedDisconnect™ IntelliMAX™ ISOPLANAR™ LittleFET™ MICROCOUPLER™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ Across the board. Around the world.™ The Power Franchise® Programmable Active Droop™ ACEx™ ActiveArray™ Bottomless™ Build it Now™ CoolFET™ CROSSVOLT™ DOME™ EcoSPARK™ E2CMOS™ EnSigna™ FACT™ FAST® FASTr™ FPS™ FRFET™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerEdge™ PowerSaver™ PowerTrench® QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ μSerDes™ ScalarPump™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TCM™ TinyBoost™ TinyBuck™ TinyPWM™ TinyPower™ TinyLogic® TINYOPTO™ TruTranslation™ UHC™ UniFET™ UltraFET® VCX™ Wire™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I20