EP15 Series EP15 • EPO™ Programmable Oscillator • 3.3V supply voltage • HCMOS/TTL output • Plastic surface mount package • Stability to 50ppm • Available on tape and reel H 4.7 L 14.0 W 9.8 OSCILLATOR ELECTRICAL SPECIFICATIONS Frequency Range 1.000MHz to 106.250MHz Operating Temperature Range -20°C to 70°C or -40°C to 85°C Storage Temperature Range -55°C to 125°C Supply Voltage (VDD) 3.3VDC ±0.3VDC Input Current 28mA Maximum (Unloaded) Disable Current (TS Option) 16mA Maximum (Pin 1=Ground) Standby Current (PD Option) 20µA Maximum (Pin 1=Ground) Frequency Tolerance / Stability Inclusive of all conditions: Calibration Tolerance at 25°C, ±100ppm or ±50ppm Maximum Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, First Year Aging at 25°C, Shock, and Vibration Output Voltage Logic High (VOH) VDD-0.4VDC Minimum IOH=-8mA Output Voltage Logic Low (VOL) 0.4VDC Maximum IOL=+8mA Rise Time / Fall Time 20% to 80% of waveform 4 nSeconds Maximum Duty Cycle at 50% of waveform 50 ±10(%) (Standard) at 50% of waveform (<50.000MHz Only) 50 ±5(%) (Optional) <50.000MHz 30pF HCMOS Load Maximum >50.000MHz 15pF HCMOS Load Maximum TS Tri-State PD Power Down VIH: No Connection or ≥70% of VDD Enables Output VIL: (TS Option) <20% of VDD Disable Output: High Impedance VIL: (PD Option) <20% of VDD Disable Output: Logic Low Load Drive Capability Output Control Function Output Control Function Input Voltage Aging (at 25°C) ±5ppm / year Maximum Start Up Time 10 mSeconds Maximum Period Jitter: Absolute Period Jitter: One Sigma <33.000MHz ±250pSec Maximum, ±100pSec Typical >33.000MHz ±125pSec Maximum, ±75pSec Typical <33.000MHz ±50pSec Maximum >33.000MHz ±40pSec Maximum MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS ECLIPTEK CORP. OSCILLATOR EP15 PLASTIC 3.3V OS49 800-ECLIPTEK www.ecliptek.com for latest revision REV.DATE 02/04 Specifications subject to change without notice. PART NUMBERING GUIDE EP15 00 SJ ET T TS - 24.000M TR FREQUENCY TOLERANCE / STABILITY 00=±100ppm Maximum (Standard) 45=±50ppm Maximum PACKAGING OPTIONS Blank=Bulk TR=Tape and Reel (Standard) OPERATING TEMP. RANGE Blank=-20°C to 70°C ET=-40°C to 85°C FREQUENCY OUTPUT CONTROL FUNCTION TS=Tri-State PD=Power Down DUTY CYCLE Blank=50 ±10(%) (Standard) T=50 ±5(%) MECHANICAL DIMENSIONS SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS ALL DIMENSIONS IN MILLIMETERS Pin 1: Tri-State or Power Down Pin 2: Case Ground Pin 3: Output Pin 4: Supply Voltage Tolerances = ±0.1 TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS A B C D E 24 ±.3 11.5 ±.1 10.75 ±.1 4 ±.2 2±.1 TAPE F 12 ±.2 F M N O P Q 1.5 MIN 50 MIN 20.2 MIN 13±.2 40 MIN QTY/REEL 1000 REEL G H J K L R S T U V B0* 1.5 +.1-0 A0* .3 ±.1 K0* 2.5 MIN 10 MIN 30.4 MAX 360 MAX 24.4+2-0 *Compliant to EIA 481A MARKING SPECIFICATIONS ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Characteristic Specification Line 1: ECLIPTEK Fine Leak Test Gross Leak Test Mechanical Shock Vibration Lead Integrity Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2004 MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-883, Method 210 MIL-STD-883, Method 215 Line 2: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Line 3: P XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Configuration Designator MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EP15 PLASTIC 3.3V OS49 02/04 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.