ECLIPTEK EPS13D2

EPS13D2 Series
• RoHS Compliant (Pb-Free)
• EPS™ Spread Spectrum Programmable Clock Oscillators
• Ceramic 4-pad SMD Package
• Low EMI LVHCMOS Output
• 3.3V Supply Voltage
• Stability to 100ppm
• Center Spread and Down Spread Modulation
• Tri-State and Power Down Options Available
• Available on Tape & Reel
EPS13D2
H
L
W
1.6
7.0
5.0
OSCILLATOR
ELECTRICAL SPECIFICATIONS
Nominal Frequency
Operating Temperature Range
Storage Temperature Range
Supply Voltage (VDD)
Maximum Supply Voltage
Input Current
Frequency Tolerance / Stability
Output Voltage Logic High (VOH)
Output Voltage Logic Low (VOL)
Rise Time / Fall Time
Duty Cycle
Load Drive Capability
Output Control Function
Tri-State/Power Down Input Voltage
Power Down Output Disable Time
Power Down Output Enable Time
Standby Current
Tri-State Output Disable Time
Tri-State Output Enable Time
Disable Current
Spread Spectrum Percentage
Modulation Frequency
Period Jitter
Aging
Start Up Time
Unloaded; VDD = 3.3VDC
Inclusive of All Conditions: Frequency Stability over the
Operating Temperature Range, Supply Voltage Change,
Output Load Change, 1st Year Aging at 25°C, Shock, and
Vibration
IOH = -8mA
IOL = +8mA
20% to 80% of waveform
at 50% of waveform
14.318MHz to 166.000MHz
-20°C to 70°C
-55°C to 125°C
3.3VDC ±0.3VDC
-0.5VDC to 7.0VDC
30mA Maximum
±100ppm Maximum
VDD-0.4VDC Minimum
0.4VDC Maximum
2.7nSeconds Maximum
50 ±10(%)
50 ±5(%)
15pF HCMOS Load Maximum
Internal Pull Down Resistor of 100kOhms Typical on Pad 3, Tri-State or Power Down
Internal Pull Up Resistor of 100kOhms Typical on Pad 1
VIH of 70% of VDD Minimum
Enables Output
No Connection
Enables Output
VIL of 30% of VDD Maximum
Disables Output: High Impedance
350nSec Maximum
3mSec Maximum
Unloaded; Pad 1 = Ground; VDD = 3.3VDC
50μA Maximum
350nSec Maximum
350nSec Maximum
Unloaded; Pad 1 = Ground; VDD = 3.3VDC
20mA Maximum
±0.25%, ±0.50%, ±0.75%, ±1.0%, ±1.5%, ±2.0%
Center Spread
-0.50%, -1.0%, -1.5%, -2.0%, -3.0%, -4.0%
Down Spread
30kHz Minimum, 31.5kHz Typical,
33kHz Maximum
700pSec Maximum < 25.000MHz
Cycle to Cycle; Spread Spectrum-On; VDD = 3.3VDC
400pSec Maximum 25.000MHz to 133.000MHz
300pSec Maximum > 133.000MHz
First Year at 25°C
±5ppm Maximum
10mSec Maximum
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
EPS13D2
CERAMIC
3.3V
OS2G
09/07
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
PART NUMBERING GUIDE
EPS13D2 C 1 H A - 44.736M TR
FREQUENCY TOLERANCE & STABILITY/
OPERATING TEMPERATURE RANGE
C=±100ppm Maximum over -20°C to +70°C
AVAILABLE OPTIONS
Blank=Tubes
TR=Tape and Reel (Standard)
FREQUENCY
DUTY CYCLE
1=50% ±10%, 2=50% ±5%
SPREAD SPECTRUM PERCENTAGE
A = ±0.25% Center Spread G = -0.50% Down Spread
B = ±0.50% Center Spread H = -1.00% Down Spread
C = ±0.75% Center Spread J = -1.50% Down Spread
D = ±1.00% Center Spread L = -2.00% Down Spread
E = ±1.50% Center Spread N = -3.00% Down Spread
F = ±2.00% Center Spread P = -4.00% Down Spread
LOGIC CONTROL/ADDITIONAL OUTPUT
H=Tri-State
J=Power Down
SUGGESTED SOLDER PAD LAYOUT
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
ALL DIMENSIONS IN MILLIMETERS
2.20
±0.15
5.00
±0.15
MARKING
ORIENTATION
2.0
(X4)
1
4
7.00
±0.15
2.0 (X4)
1.4 ±0.2
5.08
±0.15
3.68
±0.15
2
3
1.60 ±0.20
1.4 ±0.1
Pin 1: Tri-State or Power Down Pin 3: Output
Pin 4: Supply Voltage
Pin 2: Case Ground
TAPE AND REEL DIMENSIONS
Solder Land
(X4)
3.1
1.6
Tolerances= +0.1
ALL DIMENSIONS IN MILLIMETERS
TAPE
A
16±.3
B
C
D
E
7.5±.1
6.75±.1
4 ±.1
2±.1
F
G
H
J
K
8±.1
A0*
1.5 +.1-0
B0*
.3 ±.05
F
M
N
O
P
Q
1.5 MIN
50 MIN
20.2 MIN
13±.2
40 MIN
QTY/REEL
1,000
REEL
L
K0*
R
S
T
U
V
2.5 MIN
10 MIN
22.4 MAX
360 MAX
16.4+2-0
*Compliant to EIA 481A
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
MARKING SPECIFICATIONS
Line 1: ECLIPTEK
Characteristic
Specification
Fine Leak Test
Gross Leak Test
Mechanical Shock
Vibration
Solderability
Temperature Cycling
Resistance to Soldering Heat
Resistance to Solvents
MIL-STD-883, Method 1014, Condition A
MIL-STD-883, Method 1014, Condition C
MIL-STD-202, Method 213, Condition C
MIL-STD-883, Method 2007, Condition A
MIL-STD-883, Method 2002
MIL-STD-883, Method 1010
MIL-STD-202, Method 210
MIL-STD-202, Method 215
Line 2: XX.XXX M
Frequency in MHz (5 Digits Maximum + Decimal)
Line 3: S XX Y ZZ
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
Configuration Designator
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
EPS13D2
CERAMIC
3.3V
OS3G
09/07
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.