EP36 Series EP36 • RoHS Compliant (Pb-Free) • EPO™ Programmable Oscillators • 3.3V supply voltage • LVHCMOS output • Ceramic SMD package • Stability to ±50ppm • Available on tape and reel H 1.3 L 5.0 W 3.2 OSCILLATOR ELECTRICAL SPECIFICATIONS Frequency Range 1.000MHz to 106.250MHz Operating Temperature Range -20°C to 70°C or -40°C to 85°C Storage Temperature Range -55°C to 125°C Supply Voltage (VDD) 3.3VDC ±0.3VDC Input Current 28mA Maximum (Unloaded) Disable Current (TS Option) 16mA Maximum (Pin 1=Ground) 20µA Maximum (Pin 1=Ground) Standby Current (PD Option) Frequency Tolerance / Stability Inclusive of all conditions: Calibration Tolerance at 25°C, ±100ppm or ±50ppm Maximum Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, First Year Aging at 25°C, Shock, and Vibration VDD-0.4VDC Minimum IOH=-8mA Output Voltage Logic High (VOH) 0.4VDC Maximum Output Voltage Logic Low (VOL) IOL=+8mA Rise Time / Fall Time 20% to 80% of waveform 4 nSeconds Maximum Duty Cycle at 50% of waveform 50 ±10(%) (Standard) at 50% of waveform (<50.000MHz Only) 50 ±5(%) (Optional) <50.000MHz 30pF HCMOS Load Maximum >50.000MHz 15pF HCMOS Load Maximum TS Tri-State PD Power Down VIH: No Connection or ≥70% of VDD Enables Output VIL: (TS Option) <20% of VDD Disable Output: High Impedance VIL: (PD Option) <20% of VDD Disable Output: Logic Low Load Drive Capability Output Control Function Output Control Function Input Voltage ±5ppm / year Maximum Aging (at 25°C) 10 mSeconds Maximum Start Up Time Period Jitter: Absolute Period Jitter: One Sigma MANUFACTURER CATEGORY ECLIPTEK CORP. OSCILLATOR <33.000MHz ±250pSec Maximum, ±100pSec Typical >33.000MHz ±125pSec Maximum, ±75pSec Typical <33.000MHz ±50pSec Maximum >33.000MHz ±40pSec Maximum SERIES PACKAGE VOLTAGE CLASS REV.DATE EP36 CERAMIC 3.3V OS89 01/04 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EP36 00 ET T TS - 24.000M TR FREQUENCY TOLERANCE / STABILITY 00=±100ppm Maximum (Standard) 45=±50ppm Maximum AVAILABLE OPTIONS Blank=Bulk (Standard) TR=Tape and Reel OPERATING TEMP. RANGE Blank=-20°C to 70°C or ET=-40°C to 85°C FREQUENCY OUTPUT CONTROL FUNCTION TS=Tri-State PD=Power Down DUTY CYCLE Blank=50 ±10(%) (Standard) T=50 ±5(%) MECHANICAL DIMENSIONS SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS ALL DIMENSIONS IN MILLIMETERS Pin 1: Tri-State or Power Down Pin 2: Case Ground TAPE AND REEL DIMENSIONS Pin 3: Output Pin 4: Supply Voltage Tolerances = +0.1 ALL DIMENSIONS IN MILLIMETERS A B C D E 12.0±0.2 5.5±0.1 6.5±0.1 4.0±0.1 2.0±0.1 TAPE F 8.0±0.1 G H B0* 1.5 +0.1-0.0 F M N 1.5 MIN 50 MIN REEL O P 20.2 MIN 13.0±0.2 J K L R S T U V A0* 0.30 ±0.05 K0* 2.5 MIN 10 MIN 18.4 MAX 180 MAX 12.4+2-0 Q 40 MIN QTY/REEL 1,000 *Compliant to EIA 481A MARKING SPECIFICATIONS ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Characteristic Specification Fine Leak Test Gross Leak Test Mechanical Shock Vibration Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-202, Method 210 MIL-STD-202, Method 215 MANUFACTURER CATEGORY SERIES PACKAGE ECLIPTEK CORP. OSCILLATOR EP36 CERAMIC 800-ECLIPTEK www.ecliptek.com for latest revision Line 1: E XX.XXX Frequency in MHz (5 Digits Maximum + Decimal) VOLTAGE 3.3V CLASS OS89 REV.DATE 01/04 Specifications subject to change without notice. Ecliptek MEMS Oscillators - Lower Cost, Quicker Delivery Alternative! The EMO™ family of oscillators offers exceptional performance, shorter delivery and significant cost advantages by utilizing a revolutionary new MEMS resonator technology. This important innovation enables Ecliptek to offer the ultimate in flexibility with delivery of 2 days for samples and 5 to 10 days for quantities up to 10,000 pieces on tape and reel. Package Dimensions (all dimensions in millimeters) Supply Voltage (VDC) 5x7 3.2 x 5 2.5 x 3.2 2 x 2.5 1.8 EMK11 EMK21 EMK31 EMK41 2.5 EMK12 EMK22 EMK32 EMK42 3.3 EMK13 EMK23 EMK33 EMK43 Would you like to request EMO™ samples or a quotation now? Click Here Want to learn more about the Ecliptek EMO™ family of MEMS oscillators? Click Here Product Features: • • • • • • • • • Improved frequency stability through the use of a MEMS resonator 1.8VDC, 2.5VDC, or 3.3VDC supply voltages Frequency range of 1MHz to 125MHz, HCMOS output Frequency stability to ±50ppm, -40°C to +85°C operation Tri-state or power down functions RoHS compliant High temperature +260°C reflow capability EIA compliant tape and reel packaging Four SMD package sizes If you have any questions or would like additional information regarding the Ecliptek EMO™ family of oscillators, please contact our Sales Department.