EP25 Series EP25 • RoHS Compliant (Pb-Free) • EPO™Programmable Oscillators • 5.0V supply voltage • HCMOS/TTL output • Ceramic SMD package • Stability to 50ppm • Available on tape and reel H 1.6 L 7.0 W 5.0 OSCILLATOR ELECTRICAL SPECIFICATIONS Frequency Range 1.000MHz to 125.000MHz Operating Temperature Range -20°C to 70°C or -40°C to 85°C Storage Temperature Range -55°C to 125°C Supply Voltage (VDD) 5.0VDC ±10% Input Current 45mA Maximum (Unloaded) Disable Current (TS Option) 30mA Maximum (Pin 1=Ground) 50µA Maximum (Pin 1=Ground) Standby Current (PD Option) Frequency Tolerance / Stability Inclusive of all conditions: Calibration Tolerance at 25°C, ±100ppm or ±50ppm Maximum Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, First Year Aging at 25°C, Shock, and Vibration Output Voltage Logic High (VOH) w/TTL Load 2.4VDC Minimum w/HCMOS Load VDD-0.4VDC Minimum Output Voltage Logic Low (VOL) w/TTL Load or w/HCMOS Load 0.4VDC Maximum Rise Time / Fall Time at 0.8VDC to 2.0VDC w/TTL Load 4 nSec Maximum at 20% to 80% of waveform w/HCMOS Load 4 nSec Maximum at 1.4VDC w/TTL Load; at 50% of waveform w/HCMOS Load 50 ±10(%) (Standard) at 1.4VDC w/TTL Load (<27.000MHz only), or 50 ±5(%) (Optional) Duty Cycle IOH=-16mA IOH=-16mA IOL=+16mA at 50% of waveform w/HCMOS Load (<50.000MHz Only) Load Drive Capability / <50.000MHz 50pF HCMOS Load Maximum Output Type-HCMOS >50.000MHz 15pF HCMOS Load Maximum Load Drive Capability / <40.000MHz 10TTL Load Maximum Output Type-TTL >40.000MHz 5TTL Load Maximum Output Control Function TS Tri-State PD Power Down Output Control Function Input Voltage VIH: No Connection or ≥2.0VDC Enables Output VIL: (TS Option) <0.8VDC Disable Output: High Impedance VIL: (PD Option) <0.8VDC Disable Output: Logic Low Aging (at 25°C) ±5ppm / year Maximum Start Up Time 10 mSeconds Maximum Period Jitter: Absolute Period Jitter: One Sigma <33.000MHz ±250pSec Maximum, ±100pSec Typical >33.000MHz ±100pSec Maximum, ±50pSec Typical <33.000MHz ±50pSec Maximum >33.000MHz ±30pSec Maximum MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EP25 CERAMIC 5.0V OS48 02/04 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EP25 00 ET T TS L - 24.000M TR FREQUENCY TOLERANCE / STABILITY 00=±100ppm Max (Standard), 45=±50ppm Maximum AVAILABLE OPTIONS Blank=Bulk (Standard) TR=Tape and Reel OPERATING TEMP. RANGE Blank=-20°C to 70°C (Standard) ET=-40°C to 85°C FREQUENCY OUTPUT TYPE L=TTL, C=HCMOS DUTY CYCLE Blank=50 ±10(%) (Standard), T=50 ±5(%) OUTPUT CONTROL FUNCTION TS=Tri-State, PD=Power Down MECHANICAL DIMENSIONS SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS ALL DIMENSIONS IN MILLIMETERS Pin 1: Tri-State or Power Down Pin 2: Case Ground TAPE AND REEL DIMENSIONS Pin 3: Output Pin 4: Supply Voltage Tolerances = ±0.1 ALL DIMENSIONS IN MILLIMETERS A B C D E 16+.3-.1 7.5±.1 6.75±.1 4 ±.1 2±.1 TAPE F M N O P Q 1.5 MIN 50 MIN 20.2 MIN 13±.2 40 MIN QTY/REEL 1,000 REEL F G H J K L R S T U V 8±.1 B0* 1.5 +.1-0 A0* .3 ±.05 K0* 2.5 MIN 10 MIN 22.4 MAX 360 MAX 16.4+2-0 *Compliant to EIA 481A MARKING SPECIFICATIONS ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Characteristic Specification Line 1: ECLIPTEK Fine Leak Test Gross Leak Test Mechanical Shock Vibration Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-883, Method 210 MIL-STD-883, Method 215 Line 2: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Line 3: P XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Configuration Designator MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EP25 CERAMIC 5.0V OS48 02/04 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.