TH97/2478 AKBP200 - AKBP210 IATF 0060636 SGS TH07/1033 AVALANCHE BRIDGE RECTIFIERS PRV : 50 - 1000 Volts Io : 2.0 Amperes KBP 0.59 (14.9) 0.57 (14.5) FEATURES : * * * * * * * TH09/2479 High case dielectric strength High surge current capability High reliability Low reverse current Low forward voltage drop ldeal for printed circuit board Pb / RoHS Free Φ3 0.448 (11.4) 0.433 (11.0) + AC AC 0.0307 (0.78) 0.0303 (0.77) 0.696 (17.7) MIN. MECHANICAL DATA : 0.150 (3.82) 0.148 (3.78) 0.151 (3.85 ) 0.147 (3.75) 0.051 (1.30) 0.043 (1.10) * Case : Reliable low cost construction utilizing molded plastic technique * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL - STD 202 , Method 208 guaranteed * Polarity : Polarity symbols marked on case * Mounting position : Any * Weight : 3.4 grams Dimensions in inches and ( millimeter ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified . Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING SYMBOL Maximum Recurrent Peak Reverse Voltage VRRM Maximum RMS Voltage VRMS AKBP AKBP AKBP AKBP AKBP AKBP AKBP UNIT 200 201 202 204 206 208 210 50 100 200 400 600 800 1000 V 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V Minimum Avalanche Breakdown Voltage at 100 μA VBO(min.) 100 150 250 450 700 900 1100 V Maximum Avalanche Breakdown Voltage at 100 μA VBO(max.) 550 600 700 900 1150 1350 1550 V Maximum DC Blocking Voltage Maximum Average Forward Current Tc = 50°C Peak Forward Surge Current Single half sine wave Superimposed on rated load (JEDEC Method) Rating for fusing at ( t < 8.3 ms. ) Maximum Forward Voltage per Diode at I F = 1.0 A Ta = 25 °C IF(AV) 2.0 A IFSM 50 A 2 10 A2S V I t VF 1.0 IR 10 IR(H) 1.0 μA mA 36 °C/W Operating Junction Temperature Range RθJA TJ - 50 to + 150 °C Storage Temperature Range TSTG - 50 to + 150 °C Maximum DC Reverse Current at Rated DC Blocking Voltage Ta = 100 °C Typical Thermal Resistance (Note1) Notes : 1 ) Thermal resistance from Junction to ambient with units mounted on a 3" x 3" x 0.11" ( 7.5 x 7.5 x 0.3 cm ) Cu. plate. Page 1 of 2 Rev. 03 : June 12, 2009 TH97/2478 TH09/2479 IATF 0060636 SGS TH07/1033 RATING AND CHARACTERISTIC CURVES ( AKBP200 - AKBP210) FIG.1 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 50 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT, AMPERES 2.5 MOUNTED ON 3" x 3" x0.11" (7.5x7.5x0.3 cm.) Cu. Plate 2.0 1.5 1.0 0.5 0 0 25 50 75 100 125 150 40 30 TJ = 25°C 20 10 0 175 8.3 ms SINGLE SINE WAVE JEDEC METHOD AMBIENT TEMPERATURE, ( °C) 1 2 4 6 10 20 40 60 100 NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS PER DIODE 10 REVERSE CURRENT, MICROAMPERES FORWARD CURRENT, AMPERES 100 TJ = 25°C 10 1.0 Pulse Width = 300 μs 1% Duty Cycle 0.1 TJ = 100 °C 1.0 0.1 TJ = 25 °C 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED REVERSE VOLTAGE, (%) 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 FORWARD VOLTAGE, VOLTS Page 2 of 2 Rev. 03 : June 12, 2009