BR5000 - BR5010 SILICON BRIDGE RECTIFIERS BR50 PRV : 50 - 1000 Volts Io : 50 Amperes 0.728(18.50) 0.688(17.40) FEATURES : * * * * * * 0.685(16.70) 1.130(28.70) 0.618(15.70) 1.120(28.40) 0.570(14.50) 0.530(13.40) High case dielectric strength High surge current capability High reliability High efficiency Low reverse current Low forward voltage drop 0.210(5.30) 0.200(5.10) 0.658(16.70) 0.618(15.70) 0.032(0.81) 0.028(0.71) * Pb / RoHS Free MECHANICAL DATA : * Case : Molded plastic with heatsink integrally mounted in the bridge encapsulation * Epoxy : UL94V-O rate flame retardant * Terminals : plated .25" (6.35 mm). Faston * Polarity : Polarity symbols marked on case * Mounting position : Bolt down on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer efficiency. * Weight : 17.1 grams 0.252(6.40) 0.248(6.30) φ 0.100(2.50) 0.090(2.30) 0.905(23.0) 0.826(21.0) 0.310(7.87) 0.280(7.11) Metal Heatsink Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING SYMBOL BR5000 BR5001 BR5002 BR5004 BR5006 BR5008 BR5010 UNIT Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Current Tc = 55°C Peak Forward Surge Current Single half sine wave IF(AV) 50 A IFSM 500 A I2t 660 A 2S Superimposed on rated load (JEDEC Method) Current Squared Time at t < 8.3 ms. Maximum Forward Voltage per Diode at IF=25 A VF 1.1 V Maximum DC Reverse Current Ta = 25 °C IR 10 µA at Rated DC Blocking Voltage Ta = 100 °C IR(H) 200 µA Rθ JC 1 °C/W TJ - 40 to + 150 °C TSTG - 40 to + 150 °C Typical Thermal Resistance (Note 1) Operating Junction Temperature Range Storage Temperature Range Notes : 1 ) Thermal resistance from Junction to Case with units mounted on a 9"x5"x4.6" (22.9x12.7x11.7 cm) Al-Finned Heatsink. Page 1 of 2 Rev. 02 : March 24, 2005 RATING AND CHARACTERISTIC CURVES (BR5000 - BR5010 ) FIG.1 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT AMPERES 60 HEAT-SINK MOUNTING, Tc 9" x 5" x 4.6" THK. 5 5 5 (22.9 x 12.7 x 11.7cm) 0 0 0 Al.-Finned . 50 40 30 20 10 0 0 25 50 75 100 125 150 600 500 T J = 50 °C 400 300 200 8.3 ms SINGLE HALF SINE WAVE JEDEC METHOD 100 0 175 1 CASE TEMPERATURE, ( °C) 2 4 6 10 20 40 60 100 NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS PER DIODE PER DIODE 10 100 REVERSE CURRENT, MICROAMPERES FORWARD CURRENT, AMPERES T J = 100 °C 10 Pulse Width = 300 µs 1 % Duty Cycle 1.0 1.0 T J = 25 °C 0.1 T J = 25 °C 0.1 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED REVERSE VOLTAGE, (%) 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 FORWARD VOLTAGE, VOLTS Page 2 of 2 Rev. 02 : March 24, 2005