Optiva OTS-RSU-2 40 GHz Wideband RF Redundancy Switch Unit PRELIMINARY DATASHEET | JUNE 2014 SATCOM The Optiva OTS-RSU-2 40 GHz Wideband RF Redundancy Switch Unit is optimized to perform in the 2 GHz to 40 GHz frequency range. The OTS-RSU-2 supports satellite signal transport link redundancy applications for 1x1 redundant switch configurations when integrated with Optiva RF fiber optic transmitters and receivers. Optiva Wideband RF Redundancy Switch Units are SNMP compliant. They can be housed in the same chassis and monitored by the same Network Management System (NMS) as Optiva HD video, audio, serial data, and USB extension / distribution cards. System Design Applications RF Redundant Link The Optiva platform includes a wide range fiber optic transport products for satellite and microwave communications from 1 MHz to 40 GHz. These units can be used to construct transparent inter- and intra-facility links from 1 meter to >100 km for RF and microwave signal transport, antenna remoting, video transport, electronic war- Features 2 GHz to 40 GHz Satellite Signals 1x1 Switch Configuration 50 Ohm K fare systems and other high-dynamic-range applications. Optiva is a completely modular, hot-swappable platform. Both 19” rack-mount and compact tabletop, or wall-mountable enclosures are available. The 3 RU 19” rack-mount, fan-cooled enclosures (Model OT-CC-16 and OT-CC-16F) can support Automatic and Manual Redundancy Modes up to 16 insert cards and utilize two dual-redundant, hot-swappable, 100 or 200 Manual Position/Enable Select Button watt power supplies. The 1 RU 19” rack-mount, fan-cooled enclosure (Model: OT- Channel Status and Switch Position LED CC-6-1U) can accommodate 6 insert cards and utilizes two hot-swappable 60 watt SNMP Monitoring and Control Fits in Optiva Enclosures Which Support Daisy Chain Video, Audio and Data Links Hot Swap Redundant Power Supplies Virtually Eliminate Downtime power supplies. Compact one-slot (OT-DTCR-1), or two-slot (OT-DTCR-2) enclosures are also available that use an external wall-mount power supply. Block Diagram 16, 6, 2, & 1 Slot Enclosures Available CE & CSA Certified Device, RoHS Compliant Transmitter OTS-RFS Sin Receiver Laser PL PR Sout Photodiode OTS-RSU o Smon Push Button Optimizer Alarm o Alarm Smon Alarm Sin Laser PL P Sout Photodiode o Smon Push Button Smon Optimizer Receiver Transmitter © 2014 EMCORE Corporation | REV 2014.06 +1 626-293-3400 [email protected] www.emcore.com Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice. Optiva OTS-RSU-2 40 GHz Wideband RF Redundancy Switch Unit PRELIMINARY DATASHEET | JUNE 2014 SATCOM Performance Highlights OTS-RSU-2 Parameter Min Typical Max Units OTS-RSU-1 (1x1) Frequency Range 2000 - 40000 MHz 0.79 in (20 mm) (1 width) Insertion Loss 2 - 6 GHz 6 - 12 GHz 12-18 GHz 18-26.5 GHz 26.5-40 GHz - - 0.3 0.4 0.5 0.7 0.8 dB dB dB dB dB Isolation 2 - 6 GHz 6 - 12 GHz 12-18 GHz 18-26.5 GHz 26.5-40 GHz 80 70 65 60 55 - - dB dB dB dB dB Return Loss 2 - 3 GHz 3 - 18 GHz - - -15 -13 dB dB 35 30 25 20 15 - - W W W W W RF Power Handling (CW) 2 - 6 GHz 6 - 12 GHz 12-18 GHz 18-26.5 GHz 26.5-40 GHz Ordering Information Enclosure Options Product Code Specifications OTS-RSU-1-K5-40 RSU, 2-40 GHz, K 50 Ohm OTS-RSU-1-K5-SS-40 RSU, 2-40 GHz, K 50 Ohm, K-K Jumpers OPv-CTLR-IC NMS SNMP Controller Card and MIB for Optiva Family OTP-1ETR-A2/A2 Optical Tcvr, 1Ch, Ethernet, SM, Dual LC OT-CC-16F-XXX Chassis, Rack-Mount, 16 Slot, 3 RU -- See OT-CC-16F Data Sheet for Exact Models PS-200F-XX Power Supply, 12 VDC, 100 to 240 VAC, 50/60 Hz, (Specify power cord (NA, EU, UK)) OT-CC-6-XX Chassis, Rack-Mount, 6 Slot, 1 RU -- See OT-CC-6 Data Sheets for Exact Models OT-DTCR-1 / OT-DTCR-2 Chassis, Flange-Mount, w/Power Supply, 1 slot/2 slot -- See OT-DTCR Data Sheets for Exact Models © 2014 EMCORE Corporation | REV 2014.06 5.06 in. 128 mm 3 RU +1 626-293-3400 [email protected] www.emcore.com Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice.