CKR/ CKS +85°C General Purpose Aluminum Electrolytic Capacitors FEATURES Lead Free Leads In Stock Standardized Case Sizes Multiple Case Styles SPECIFICATIONS Capacitance Tolerance ±20% at 120Hz, 20°C Operating Temperature Range -40°C to +85°C (6.3 to 400 WVDC) -25°C to +85°C (450 WVDC) Surge Voltage WVDC 6.3 10 16 25 35 50 63 100 160 200 250 350 400 450 SVDC 7.9 13 20 32 44 63 79 125 200 250 300 400 450 500 Dissipation Factor 120Hz, 20°C WVDC 6.3 10 16 25 35 50 63 100 160 200 250 350 400 450 tan δ .24 .20 .16 .14 .12 .1 .1 .08 .15 .15 .15 .2 .2 .2 Note: For above D.F. specifications, add .02 for every 1,000 µF above 1,000 µF WVDC Leakage Current Impedance Ratio (Max.) @120Hz 6.3 to 100 WVDC 160 to 450 WVDC 1 minutes 2 minutes 2 minutes .03 CV or 4 µA, whichever is greater .01 CV or 3 µA, whichever is greater 0.03CV + 40µA Time -25°C/20°C 4 3 2 2 2 2 2 2 3 3 3 6 6 15 -40°C/20°C 8 6 4 3 3 3 3 3 6 6 6 6 6 - 2,000 hours at 85°C with rated WVDC Load Life Capacitance change Dissipation factor Leakage current < 20% of initial measured value ≤150% of initial specified value <100% Initial specified value 1,000 hours at 85°C with no voltage applied. Shelf Life ≤ 20% of initial measured value ≤ 200% of initial specified value < The initial specified value Capacitance change Dissipation factor Leakage current Frequency (Hz) Capacitance (µF) 50 C≤10 Ripple Current Multipliers 0.8 120 1.0 400 1.3 1K 1.45 Temperature (°C) 10K 1.65 100K 1.7 +85 1.0 +70 1.3 +60 1.5 1.5 10<C≤100 0.8 1.0 1.23 1.36 1.48 1.53 1.0 1.3 100<C≤1000 0.8 1.0 1.16 1.25 1.35 1.38 1.0 1.3 1.5 C>1000 0.8 1.0 1.11 1.17 1.25 1.28 1.0 1.3 1.5 SPECIAL ORDER OPTIONS • • • Special tolerances: ±10% (K), -10% + 30% Ammo Pack • • Epoxy end sealed Mylar sleeve Cut, Formed, Cut and Formed Leads ® 3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com 38 CKR/CKS + 85°C General Purpose Aluminum Electrolytic Capacitors PHYSICAL DIMENSIONS WVDC (SV) (µF) 6.3 (8) 10 (13) 16 (20) 25 (32) 35 (44) 50 (63) 0.1 5x11 0.15 5x11 0.22 5x11 0.33 5x11 0.47 5x11 0.68 5x11 1 5x11 1.5 5x11 2.2 63 (79) 100 (125) 160 (200) 200 (250) 250 (300) 350 (400) 400 (450) 450 (500) 5x11 5x11 6.3x11 5x11 5x11 6.3x11 8x11.5 6.3x11 3.3 5x11 5x11 6.3x11 6.3x11 8x11.5 8x11.5 8x11.5 10x12.5 10x12.5 10x16 4.7 5x11 5x11 6.3x11 8x11.5 6.3x11 10x16 10x12.5 10x12.5 10x12.5 5x11 15 5x11 22 33 47 5x11 68 6.3x11 100 5x11 5x11 5x11 6.3x11 8x11.5 10x12.5 10x12.5 10x12.5 8x11.5 10x16 10x20 10x16 10x20 12.5x20 5x11 5x11 6.3x11 6.3x11 8x11.5 10x12.5 10x16 10x16 10x20 10x20 12.5x20 12.5x25 12.5x25 13x26 16x25 5x11 6.3x11 6.3x11 10x12.5 8x11.5 10x16 10x20 10x20 12.5x20 12.5x25 16x25 16x25 16x31.5 6.3x11 6.3x11 8x11.5 10x12.5 10x21 12.5x20 12.5x20 10x16 12.5x20 12.5x25 8x11.5 16x25 8x11.5 8x11.5 10x12.5 6.3x11 8x11.5 10x12.5 8x11.5 10x16 12.5x25 10x20 12.5x20 10x16 12.5x20 16x25 16x25 18x35.5 16x31.5 6.3x11 8x11.5 10x12.5 220 5x11 6.3x11 6.3x11 6.3x11 8x11.5 10x12.5 10x12.5 8x11.5 10x16 10x16 10x20 12.5x20 16x31.5 16x35.5 18x35.5 12.5x25 16x35.5 16x25 330 6.3x11 6.3x11 8x11.5 10x12.5 10x20 12.5x25 18x35.5 16x25 470 6.3x11 8x11.5 10x12.5 10x16 680 10x16 8x11.5 1500 10x12.5 10x12.5 10x16 10x16 10x16 10x16 10x20 10x20 10x20 12.5x20 12.5x25 12.5x20 12.5x25 4700 12.5x20 12.5x25 16x25 6800 12.5x25 10000 16x25 16x25 16x31.5 16x35.5 16x35.5 18x35.5 22000 18x35.5 10x20 12.5x20 16x25 12.5x20 12.5x25 16x31.5 18x35.5 18x40 18x40 18x42 12.5x25 10x16 12.5x20 12.5x25 16x25 18x35.5 10x20 12.5x25 16x25 16x31.5 18x40 12.5x20 12.5x20 16x25 12.5x25 16x31.5 16x25 16x31.5 18x35.5 16x35.5 18x35.5 16x25 16x35.5 16x31.5 18x35.5 18x35.5 16x25 16x35.5 16x35.5 18x35.5 18x35.5 16x31.5 16x35.5 16x35.5 18x35.5 15000 16x25 16x31.5 16x31.5 18x35.5 10x20 12.5x25 16x25 16x31.5 18x35.5 12.5x20 16x25 16x31.5 16x35.5 18x35.5 3300 16x25 12.5x20 10x16 10x20 16x25 10x16 5x11 150 2200 8x11.5 10x12.5 5x11 10 1000 8x11.5 Aluminum Electrolytic 6.8 6.3x11 8x11.5 8x11.5 18x40 18x40 18x40 18x40 Convert to inches, divide by 25.4. DxL(mm) ® 3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com 39 CKR/CKS + 85°C General Purpose Aluminum Electrolytic Capacitors STANDARD PART LISTING PLEASE NOTE: The CKR and CKS Series have been merged. CHECK PART NUMBERS CAREFULLY. Capacitance (µF) WVDC PART NUMBER Maximum ESR Ω 120Hz,+20°C Maximum RMS Ripple Current (mA) 120Hz,+85°C Dimensions DxL (mm) Capacitance (µF) WVDC PART NUMBER Maximum ESR Ω 120Hz,+20°C Maximum RMS Ripple Current (mA) 120Hz,+85°C Dimensions DxL (mm) 0.1 50 104CKR050M 1657.864 1.5 5x11 6.8 63 685CKR063M 24.380 51 5x11 0.15 50 154CKR050M 1105.243 2 5x11 10 50 106CKR050M 16.579 65 5x11 0.22 50 224CKR050M 753.575 9 5x11 10 63 106CKR063M 13.263 67 5x11 0.33 50 334CKR050M 502.383 10 5x11 10 100 106CKS100MEM 13.263 70 5x11 0.47 50 474CKR050M 352.737 7 5x11 10 100 106CKS100M 13.263 80 6.3x11 0.47 100 474CKR100M 282.190 12 5x11 10 160 106CKS160M 24.868 70 8x11.5 0.68 50 684CKR050M 243.804 9 5x11 10 200 106CKS200M 24.868 80 10x12.5 1 50 105CKR050M 165.786 16 5x11 10 200 106CKS200MJM 24.868 80 8x11.5 1 100 105CKR100M 132.629 22 5x11 10 250 106CKS250MLN 24.868 100 10x12.5 1 250 105CKR250M 248.680 22 6.3x11 10 250 106CKS250M 24.868 95 10x16 1 450 105CKS450M 331.573 22 8x11.5 10 350 106CKS350MLQ 33.157 90 10x12.5 1.5 50 155CKR050M 110.524 18 5x11 10 350 106CKS350M 33.157 95 10x20 2.2 50 225CKR050M 75.357 29 5x11 10 400 106CKS400MLQ 33.157 90 10x16 2.2 100 225CKS100M 60.286 34 5x11 10 450 106CKS450MLU 33.157 80 10x20 2.2 250 225CKS250M 113.036 33 6.3x11 10 450 106CKS450M 33.157 100 12.5x20 2.2 250 225CKR250M 113.036 31 8x11.5 15 50 156CKR050M 11.052 78 5x11 2.2 350 225CKS350M 150.715 30 6.3x11 15 100 156CKR100M 8.842 98 8x11.5 5x11 2.2 400 225CKS400M 150.715 33 8x11.5 22 50 226CKR050M 7.536 95 2.2 450 225CKS450M 150.715 35 10x12.5 22 63 226CKS063M 7.536 100 5x11 2.2 450 225CKS450MJM 150.715 28 8x11.5 22 63 226CKR063M 6.029 104 6.3x11 3.3 50 335CKS050M 50.238 37 5x11 22 100 226CKS100M 6.029 140 6.3x11 3.3 100 335CKS100M 40.191 42 5x11 22 100 226CKR100M 6.029 135 8x11.5 3.3 200 335CKS200M 75.357 37 6.3x11 22 160 226CKS160MLN 11.304 130 10x12.5 3.3 250 335CKS250MGM 75.357 40 6.3x11 22 160 226CKS160M 11.304 120 10x16 3.3 250 335CKS250M 75.357 46 8x11.5 22 200 226CKS200MLQ 11.304 150 10x16 3.3 350 335CKS350MJM 100.477 43 8x11.5 22 200 226CKS200M 11.304 150 10x20 3.3 400 335CKS400M 100.477 45 10x12.5 22 250 226CKS250MLU 11.304 150 10x20 3.3 400 335CKS400MJM 100.477 48 8x11.5 22 250 226CKR250M 11.304 160 12.5x20 3.3 450 335CKS450MLM 100.477 40 10x12.5 22 350 226CKS350M 15.071 150 12.5x20 3.3 450 335CKS450M 100.477 47 10x16 22 400 226CKS400M 15.071 170 12.5x25 4.7 50 475CKS050M 35.274 44 5x11 22 450 226CKS450MNV 15.071 140 13x26 4.7 100 475CKR100M 28.219 48 5x11 22 450 226CKS450M 15.071 160 16x25 4.7 160 475CKS160M 52.911 41 6.3x11 33 50 336CKS050M 5.024 125 5x11 4.7 200 475CKS200M 52.911 50 6.3x11 33 50 336CKR050M 5.024 125 6.3x11 4.7 250 475CKS250MGM 52.911 50 6.3x11 33 63 336CKR063M 5.024 130 6.3x11 4.7 250 475CKS250M 52.911 55 8x11.5 33 100 336CKR100M 4.019 190 10x12.5 4.7 350 475CKS350M 70.547 50 10x12.5 33 100 336CKS100M 4.019 180 8x11.5 4.7 350 475CKS350MJM 70.547 55 8x11.5 33 160 336CKS160MLQ 7.536 180 10x16 4.7 400 475CKS400MLN 70.547 60 10x12.5 33 160 336CKS160M 7.536 170 10x20 4.7 400 475CKS400M 70.547 60 10x16 33 200 336CKS200MLU 7.536 200 10x20 4.7 450 475CKS450MLN 70.547 46 10x12.5 33 250 336CKS250M 7.536 210 12.5x20 4.7 450 475CKS450M 70.547 60 10x18 33 350 336CKS350M 10.048 200 12.5x25 ® 3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com 40 CKR/CKS + 85°C General Purpose Aluminum Electrolytic Capacitors STANDARD PART LISTING PLEASE NOTE: The CKR and CKS Series have been merged. CHECK PART NUMBERS CAREFULLY. Capacitance (µF) WVDC PART NUMBER Maximum ESR Ω 120Hz,+20°C Maximum RMS Ripple Current (mA) 120Hz,+85°C Dimensions DxL (mm) Capacitance (µF) WVDC PART NUMBER Maximum ESR Ω 120Hz,+20°C Maximum RMS Ripple Current (mA) 120Hz,+85°C Dimensions DxL (mm) 10x12.5 33 400 336CKS400M 10.048 200 16x25 150 35 157CKR035M 1.326 291 33 450 336CKS450MQV 10.048 180 16x25 150 50 157CKR050M 1.105 330 10x16 33 450 336CKS450M 10.048 220 16x31.5 150 100 157CKR100M 0.884 425 12.5x20 47 35 476CKS035M 4.233 130 5x11 220 10 227CKS010M 1.507 240 5x11 47 50 476CKR050M 3.527 150 6.3x11 220 10 227CKR010M 1.507 250 6.3x11 47 63 476CKS063M 3.527 170 6.3x11 220 16 227CKS016M 1.206 260 6.3x11 6.3x11 63 476CKR063M 3.527 180 8x11.5 220 25 227CKS025MGM 1.055 280 100 476CKS100M 2.822 230 10x12.5 220 25 227CKR025M 1.055 340 8x11.5 47 100 476CKR100M 2.822 240 10x16 220 35 227CKR035M 0.904 390 10x12.5 47 100 476CKR100MJM 2.822 200 8x11.5 220 35 227CKS035M 0.904 385 8x11.5 47 160 476CKS160MLU 5.291 210 10x21 220 50 227CKS050M 0.754 430 10x12.5 47 160 476CKS160M 5.291 220 12.5x20 220 50 227CKR050M 0.754 470 10x16 47 200 476CKS200M 5.291 240 12.5x20 220 63 227CKS063M 0.754 490 10x16 47 250 476CKS250MNU 5.291 270 12.5x20 220 63 227CKR063M 0.754 530 10x20 47 250 476CKS250M 5.291 280 12.5x25 220 100 227CKS100MNU 0.603 550 12.5x20 47 250 476CKR250M 5.291 260 16x25 220 100 227CKS100M 0.603 680 12.5x25 47 350 476CKS350M 7.055 230 16x25 220 100 227CKR100M 0.603 690 16x25 47 400 476CKS400MQV 7.055 280 16x25 220 160 227CKS160MQW 1.130 580 16x31.5 47 400 476CKR400M 7.055 270 16x31.5 220 160 227CKS160M 1.130 580 16x35.5 47 450 476CKS450MQW 7.055 220 16x31.5 220 200 227CKS200M 1.130 700 16x35.5 47 450 476CKS450M 7.055 290 18x35.5 220 250 227CKS250M 1.130 680 18x35.5 68 25 686CKR025M 3.413 170 6.3x11 330 10 337CKS010M 1.005 290 6.3x11 68 50 686CKR050M 2.438 200 8x11.5 330 16 337CKS016MGM 0.804 320 6.3x11 68 63 686CKR063M 1.950 215 10x12.5 330 25 337CKS025M 0.703 440 8x11.5 68 100 686CKR100M 1.950 282 10x16 330 35 337CKS035M 0.603 490 10x12.5 100 16 107CKS016M 2.653 160 5x11 330 50 337CKS050M 0.502 585 10x16 100 25 107CKS025MEM 2.321 180 5x11 330 50 337CKR050M 0.502 650 10x20 100 35 107CKS035M 1.989 210 6.3x11 330 63 337CKS063M 0.502 710 10x20 100 50 107CKR050M 1.658 255 8x11.5 330 100 337CKS100M 0.402 840 12.5x25 100 63 107CKR063M 1.658 296 10x12.5 330 100 337CKR100M 0.402 840 16x25 100 63 107CKS063MJM 1.658 280 8x11.5 330 160 337CKS160M 0.754 800 18x35.5 100 100 107CKS100MLQ 1.326 340 10x16 330 200 337CKS200M 0.754 950 18x40 100 100 107CKS100M 1.326 370 10x20 470 10 477CKS010M 0.705 370 6.3x11 100 100 107CKR100M 1.326 440 12.5x20 470 16 477CKS016M 0.564 470 8x11.5 100 160 107CKS160M 2.487 350 12.5x25 470 25 477CKS025M 0.494 545 10x12.5 100 200 107CKS200M 2.487 360 16x25 470 35 477CKS035M 0.423 645 10x16 100 250 107CKS250MQV 2.487 440 16x25 470 50 477CKS050M 0.353 755 10x20 100 250 107CKS250M 2.487 440 16x31.5 470 50 477CKR050M 0.353 850 12.5x20 100 350 107CKS350M 3.316 420 18x35.5 470 63 477CKS063M 0.353 900 12.5x20 100 400 107CKS400M 3.316 440 18x35.5 470 63 477CKR063M 0.353 930 12.5x25 100 450 107CKS450M 3.316 280 18x40 470 100 477CKS100M 0.282 1010 16x25 150 10 157CKR010M 2.210 188 6.3x11 470 100 477CKR100M 0.282 1120 16x31.5 150 25 157CKR025M 1.547 258 8x11.5 470 160 477CKS160M 0.529 1200 18x42 Aluminum Electrolytic 47 47 ® 3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com 41 CKR/CKS PLEASE NOTE: The CKR and CKS Series have been merged. CHECK PART NUMBERS CAREFULLY. + 85°C General Purpose Aluminum Electrolytic Capacitors STANDARD PART LISTING Maximum ESR Ω 120Hz,+20°C Maximum RMS Ripple Current (mA) 120Hz,+85°C 687CKR016M 0.390 687CKR035M 0.293 50 687CKR050M 1000 6.3 1000 Maximum ESR Ω 120Hz,+20°C Maximum RMS Ripple Current (mA) 120Hz,+85°C Dimensions DxL (mm) 338CKR010M 0.131 1560 12.5x25 338CKS016M 0.111 1680 12.5x25 16 338CKS016M 0.111 1830 16x25 3300 25 338CKS025M 0.100 1975 16x25 10x12.5 3300 35 338CKS035M 0.0904 2100 16x31.5 Dimensions DxL (mm) Capacitance (µF) WVDC 596 10x16 3300 10 770 12.5x20 3300 16 0.244 810 12.5x25 3300 108CKS6R3M 0.398 580 8x11.5 10 108CKS010M 0.332 650 Capacitance (µF) WVDC 680 16 680 35 680 PART NUMBER PART NUMBER 1000 16 108CKS016MLN 0.332 700 10x12.5 3300 35 338CKS035M 0.0904 1655 16x35.5 1000 16 108CKS016M 0.332 785 10x16 3300 35 338CKR035M 0.090 2330 18x35.5 1000 25 108CKS025MLQ 0.232 860 10x16 3300 50 338CKS050M 0.080 2510 18x35.5 1000 25 108CKS025M 0.232 955 10x20 4700 6.3 478CKS6R3M 0.113 1545 12.5x20 10 478CKS010M 0.099 1780 12.5x25 16x25 108CKR025M 0.232 1050 12.5x20 4700 35 108CKS035M 0.199 1130 12.5x20 4700 10 478CKR010M 0.099 1770 35 108CKR035M 0.199 1300 12.5x25 4700 16 478CKS016M 0.085 2090 16x25 1000 50 108CKS050M 0.166 1340 12.5x25 4700 25 478CKS025MQV 0.078 2200 16x25 1000 50 108CKR050M 0.166 1310 16x25 4700 25 478CKS025M 0.078 2420 16x31.5 1000 63 108CKS063M 0.166 1310 16x25 4700 25 478CKR025M 0.078 2430 18x35.5 1000 63 108CKR063M 0.166 1460 16x31.5 4700 35 478CKS035MQY 0.071 2500 16x35.5 1000 25 1000 1000 1000 100 108CKS100MRY 0.133 1350 18x35.5 4700 35 478CKS035M 0.071 2700 18x35.5 1000 100 108CKS100M 0.133 1930 18x40 6800 6.3 688CKS6R3M 0.088 1915 12.5x25 1500 10 158CKS010M 0.243 897 10x16 6800 10 688CKS010M 0.078 2220 16x25 1500 16 158CKS016M 0.199 1075 10x20 6800 16 688CKS016MQY 0.068 2250 16x25 1500 25 158CKS025M 0.177 1340 12.5x20 6800 16 688CKS016M 0.068 2520 16x35.5 1500 35 158CKS035M 0.155 1590 12.5x25 6800 16 688CKR016M 0.068 2580 18x35.5 1500 35 158CKR035M 0.155 1110 16x25 6800 25 688CKS025M 0.063 2600 16x35.5 1500 50 158CKS050M 0.133 1650 16x31.5 6800 25 688CKS025M 0.063 2880 18x35.5 2200 6.3 228CKS6R3M 0.211 930 10x16 6800 35 688CKS035M 0.059 2800 18x40 10x20 10000 6.3 109CKS6R3M 0.066 2330 16x25 2200 10 228CKS010M 0.181 1140 10 228CKS010MLQ 0.181 990 10x16 10000 10 109CKS010MQW 0.063 2550 16x31.5 16 228CKS016MLU 0.151 1000 10x21 10000 10 109CKS010M 0.063 2670 16x35.5 2200 16 228CKS016M 0.151 1295 12.5x20 10000 16 109CKS016MQY 0.056 2710 16x35.5 2200 25 228CKS025M 0.136 1510 12.5x25 10000 16 109CKS016M 0.056 2920 18x35.5 2200 25 228CKR025M 0.136 1650 16x25 10000 25 109CKS025M 0.053 2800 18x40 2200 35 228CKS035M 0.121 1785 16x25 15000 6.3 159CKS6R3MQW 0.057 2550 16x31.5 2200 35 228CKR035M 0.121 1830 16x31.5 15000 6.3 159CKS6R3M 0.057 2845 16x35.5 2200 50 228CKS050MQW 0.106 1980 16x31.5 15000 10 159CKS010MQY 0.053 2880 16x35.5 2200 50 228CKS050M 0.106 2075 16x35.5 15000 10 159CKS010M 0.053 3080 18x35.5 2200 50 228CKR050M 0.106 2210 18x35.5 15000 16 159CKS016M 0.053 3100 18x40 2200 63 228CKS063M 0.106 2300 18x35.5 22000 6.3 229CKS6R3MRY 0.050 3200 18x35.5 3300 6.3 338CKS6R3M 0.151 1250 10x20 22000 10 229CKS010M 0.048 3400 18x40 3300 6.3 338CKR6R3M 0.151 1380 12.5x20 15.0 MIN d PVC SLEEVE 2200 2200 - LEAD INFORMATION V.S. CASE DIAMETER NOTE: Case Vent is standard on all diameter ≥8.0mm D1 19.0 MIN L1 + S1 D 5.0 6.3 8.0 10.0 12.5 16.0 18.0 S 2.0 2.5 3.5 5.0 5.0 7.5 7.5 d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 B 0.5 0.5 0.5 0.5 0.8 0.5 0.5 L1=L + 1.5 mm Max. D1=D+B Max. S1=S±0.5 mm ® 3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com 42