CAPACITORS ALUMINIUM ELECTROLYTIC REDUCED RADIAL CEBR SECTION 1 Miniaturised size version for general purpose 2000 hour long-life at +85˚C Expanded lead taping range Safety vent construction products SPECIFICATION Item Performance Characteristics Operating Temperature Range -40 to +85°C Rated Working Voltage Range 6.3 to 100V DC Nominal Capacitance Range 10 to 22000µF Capacitance Tolerance ± 20% (120Hz, +20°C) Leakage Current 1 ≤ 0.01CV or 3 [µA] after 2 min. whichever is greater measured with rated working voltage at +20°C tan ∂ (120Hz, +20°C) Working Voltage [V] 6.3 10 16 25 35 50 63 100 tan ∂ max. 0.28 0.24 0.20 0.16 0.14 0.12 0.11 0.10 For capacitance value >F, add 0.02 per another 1000µF Characteristics at Low Temp. Impedance ratio max. at 120Hz Working Voltage [V] 6.3 10 16 25 35 50 63 100 -25°C/+20°C 5 4 3 2 2 2 2 2 -40°C/+20°C 12 10 8 5 4 3 3 For capacitance value > 1000µF, add 0.5 per another 1000µF for +25˚C/+25˚C. add 1.0 per another 1000µF for -40˚C/+20˚C. Ripple Current Refer to standard products table (120Hz, +85˚C) Frequency [Hz] 50/60 120 1K 10K Correction factor (Multiplier) 0.7 1 1.3 1.7 High Temperature Loading Test conditions Duration 2000 hours Ambient temperature +85°C Applied voltage Rated DC working voltage Post test requirements at +20°C Leakage current ≤ initial specified value Capacitance change ≤ ± 20% of initial measured value tan ∂ ≤ 150% of initial specified value Shelf Life Test conditions Duration 1000 hours Ambient temperature +85°C Applied voltage (None) Post test requirements at +20°C Same limits for high temperature loading ORDERING INFORMATION CEBR 100 16 TA Range Capacitance µF Voltage V Options: TA = Tape/Ammo-box TA = 5mm pitch, e.g. TA 2mm = 2mm pitch 36 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758 CAPACITORS ALUMINIUM ELECTROLYTIC MINIATURE RADIAL CEBR L+1 15 min 5 min P Vinyl Sleeve d ø Dø Dø P dø ± 0.5 5 2 0.5 6.3 8 2.5 3.5 0.5 10 13 16 5.0 5.0 7.5 0.6 18 7.5 0.8 Dimensions in mm +0.5 CASE SIZE TABLE WV6.3 10 162535 5063 100 µF 10 5x11 22 5x11 6.3x11 33 5x11 6.3x11 8x12 47 5x11 6.3x11 6.3x11 8x12 100 5x11 6.3x11 6.3x11 8x12 10x13 10x17 220 5x11 6.3x11 6.3x11 8x12 8x12 10x13 10x17 13x21 330 6.3x11 6.3x11 8x12 8x12 10x13 10x17 10x20 13x25 470 6.3x11 8x12 8x12 10x13 10x17 10x20 13x21 16x25.5 1000 8x12 10x13 10x17 10x20 13x21 13x25 16x25.5 18x35.5 2200 10x17 10x20 13x21 13x25 16x25.5 16x31.5 18x35.5 3300 10x20 13x21 13x25 16x25.5 16x31.5 18x35.5 4700 13x21 13x25 16x25.5 16x31.5 18x35.5 6800 13x25 16x25.5 16x31.5 18x35.5 10000 16x25.5 16x31.5 18x35.5 15000 16x31.5 18x35.5 22000 18x35.5 Sizes may reduce as technology continually improves. MAXIMUM RIPPLE CURRENT µF Volts6.3 10 162535 5063 10 22 85 33 105 100 47 100 120 160 100 140 150 185 200 260 220 170 190 200 260 320 380 410 330 210 280 300 380 420 490 540 470 300 330 400 420 430 750 755 1000 510 580 630 760 950 1100 1310 2200 840 880 1100 1300 1600 1900 2300 3300 1000 1250 1200 1660 1670 2170 4700 1450 1500 1650 1950 2400 6800 1820 2150 2100 2500 10000 2250 2225 2600 15000 2500 2950 22000 3100 100 60 105 140 200 340 550 720 1100 1350 37 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758 SECTION 1 outline drawing