CAPACITORS ULTRA LOW IMPEDANCE REDUCED SIZE DSHR Very low impedance SECTION 1 Up to 3000 hrs life -55° - 105°C Suited for power supply applications Smaller sizes than DSH D SH X R an 6.3 ~ 50Vdc 22 ~ 15000F -55° ~+105°C ±20% (M) 0.01CV, or 3µA, whichever is greater W.V. (Vdc) 6.3 10 16 25 35 50 C ≤ 1,000 0.28 0.24 0.2 0.16 0.14 0.12 C = 2,200 0.3 0.26 0.22 0.18 0.16 0.14 C = 3,300 0.32 0.28 0.24 0.2 0.18 C = 4,700 0.34 0.3 0.26 0.22 C = 6,800 0.38 0.34 0.3 C = 10,000 0.56 0.42 C = 15,000 0.56 Z-40°C/Z+20°C 3 3 2 2 2 2 Z-40°C/Z+20°C 6 5 4 4 3 3 Capacitance ChangeWithin ±25% of initial measured value by se d ed Rated Voltage Range Rated Capacitance Range Operating Temperature Range Capacitance Tolerance Maximum Leakage Current After 2 minutes At 20°C Maximum Tan∂ At 20°C & 120Hz Low Temperature Stability (Impedance Ratio) Load Life Test at Rated W.V 105°C 1,000 Hrs. = 8ø & less 105°C 2,000 Hrs. - 10ø 105°C 3,000 Hrs. = 12.5ø & up ge SPECIFICATION Tan Less than 200% of specified maximum value Leakage CurrentLess than specified value Su pe r RANGE & CASE SIZE DØ x Lmm ORDERING INFORMATION Cap. (µF) 6.3 10 16 25 35 22 33 5x11 47 5x11 100 5x11 6.3x11 6.3x11 220 5x11 6.3x11 6.3x11 8x11.5 8x12.5 330 6.3x11 6.3x11 8x11.5 8x12.5 10x12.5 470 6.3x11 8x11.5 8x12.5 10x12.5 10x16 1000 8x11.5 10x12.5 10x16 10x20 12.5x20 2200 10x16 10x20 12.5x20 12.5x25 16x25 3300 10x20 12.5x20 12.5x25 16x25 16x35.5 4700 12.5x20 12.5x25 16x25 16x31.5 6800 12.5x25 16x25 16x31.5 10,000 16x25 16x31.5 15,000 16x35.5 50 5x11 5x11 6.3x11 8x11.5 10x12.5 10x16 10x20 12.5x25 16x31.5 DSHR 330 10 /TR Series DSHR Capacitance µF Voltage Options Blank = Loose TA = Tape Ammo TR = Tape Reel TA, TR = 5mm pitch For others add pitch e.g. TA2MM = 2mm pitch 58 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758 CAPACITORS ULTRA LOW IMPEDANCE REDUCED SIZE DSHR MAXIMUM (mA AT 105˚C & 10Hz-200KHz) W.V. (Vdc /Cap. (µF) 6.3 10 16 25 35 22 33 180 47 180 100 180 280 280 220 180 280 280 410 560 330 280 280 410 510 710 470 280 410 560 710 950 1000 560 710 950 1150 1460 2200 950 1150 1460 1650 2000 3300 1150 1460 1650 2000 2200 4700 1460 1780 2000 2200 6800 1780 2000 2200 10000 2000 2200 15000 2200 ge 50 1.40 1.40 0.74 0.46 0.22 0.18 0.11 0.072 0.045 0.8 1.0 100≤C≤1000 0.7 0.9 1.0 1000≤C 0.9 0.95 1.0 ed rs ed 15 min Su pe L+1 by 0.55 D 10K≤f 22≤C<100 OUTLINE DRAWING SH RIPPLE CURRENT CORRECTION FACTOR Frequency (Hz) 100≤f≤1K 1K≤f≤10K 5 min P Vinyl Sleeve d ø Case Size (D) Lead Space (P) Lead Dia (d) 50 120 130 190 320 520 670 820 1200 1750 R an 10 16 25 35 22 33 0.72 47 0.50 100 0.50 0.30 0.24 220 0.50 0.30 0.24 0.16 0.15 330 0.30 0.24 0.16 0.15 0.086 470 0.24 0.16 0.15 0.086 0.066 1000 0.15 0.086 0.066 0.047 0.042 2200 0.066 0.047 0.042 0.040 0.026 3300 0.047 0.042 0.040 0.026 0.022 4700 0.042 0.031 0.026 0.022 6800 0.031 0.026 0.022 10000 0.026 0.022 15000 0.022 X W.V. (Vdc /Cap. (µF) 6.3 Dø ± 0.5 +0.5 Dimensions in mm 5 6.3 8 10 12.5 16 18 2 2.5 3.5 5 7.5 0.5 0.6 0.8 59 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758 SECTION 1 PERMISSIBLE RIPPLE CURRENT MAXIMUM E.S.R AT 20˚C & 100 KHz (Ω)