COMMUNICATIONS COMPONENTS 10 Gb/s Integrated Amplitude Modulator with Attenuator Key Features • Wide optical bandwidth for use in C- and L-band erbium doped fiber amplifier (EDFA) DWDM links • Separate DC bias electrode for long-term stability and reliability • Low drive voltage for ease of use with wide range of commercially available drivers • High modulator on/off extinction ratio • Continuously tunable attenuation Applications • Ideal for OC-192 C-band and L-band DWDM applications Compliance • Telcordia GR-468-CORE NORTH AMERICA : 800 498-JDSU (5378) The JDSU 10 Gb/s Integrated Amplitude Modulator with Attenuator provides intrinsic attenuation flexibility for multichannel systems. The module employs an integrated attenuator that allows pre-emphasis of all International Telecommunications Union (ITU) wavelengths in a dense wavelength division multiplexing (DWDM) optical link. The 10 Gb/s Integrated Amplitude Modulator with Attenuator is supplied in a mini package and qualifies to Telcordia GR-468-CORE. JDSU assures high reliability and performance at all times. WORLDWIDE : +800 5378-JDSU WEBSITE : www.jdsu.com 10 GB/S INTEGRATED AMPLITUDE MODULATOR WITH ATTENUATOR 2 Eye Diagram 10 Gb/s Integrated Amplitude Modulator with Attenuator Detail Pinout 135.6 81 79 Pin Description 1 2 3 4 5 6 7 8 RF input No connector No connector Ground Bias input Ground Attenuator Ground 77 4 24.8 16.2 9.5 8.5 2 4 6.4 5 6 7 8 1 18.6 48 5 pins Lead Ø 0.91 Pitch 5.08mm Lead to be flattened on package end for bonding End View 4 5 5.2 5.2 5 18.6 12.5 6.4 End View 10 GB/S INTEGRATED AMPLITUDE MODULATOR WITH ATTENUATOR 3 Specifications Parameter General Material Crystal orientation Waveguide process Optical Operating wavelength Insertion loss (with connector) (note1) On/off extinction ratio, low frequency Optical return loss Electrical RF port Vπ at 10 Gb/s PRBS S21 electro-optic bandwidth (-3 dBe) (note2, 3 ) S11 return loss 0.13 to 2.5 GHz (note3) 3 to 9 GHz (note3) 9 to 15 GHz (note3) RF input power Chirp, alpha parameter Bias port Vπ at DC Impedance Attenuator port Vπ attenuator Attenuation range Mechanical Input fiber Output fiber Input connector Output connector RF connection Bias connection Environmental Operating temperature Storage temperature Specification Lithium niobate X-cut, y-propagating Titanium-indiffused 1530 to 1605 nm ≤7 dB ≥20 dB ≤-45 dB ≤6.8 V ≥10 GHz ≤-14 dB ≤-10 dB ≤-6 dB 27 dBm ±0.2 ≤5.8 V ≥10,000 Ω ≤8.4 V ≥15 dB Fujikura SM-15-P-8/125-UV/UV-400 SMF-28 or Fujikura SM-15-P-8/125-UV/UV-400 FC/SPC FC/SPC K connector DC feedthroughs 0 to 70 °C -40 to 80 °C 1. Insertion loss is measured at the maximum of the modulator’s transfer function and does not include the 3 dB loss incurred when operating at quadrature 2. Relative to 30 MHz 3. Variances with temperature and wavelength included 10 GB/S INTEGRATED AMPLITUDE MODULATOR WITH ATTENUATOR Ordering Information For more information on this or other products and their availability, please contact your local JDSU account manager or JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at [email protected]. Sample: 21010278 Product Code 21010278 Description 10Gb/s, data modulator with attenuator, PMF in & SMF out, FC/SPC SM-15 is a registered trademark of Fujikura Europe Limited. SMF-28 and Fujikura SM 15-P-8/125-UV-400 are registered trademarks of Corning Incorporated. Telcordia is a registered trademark of Telcordia Technologies Incorporated. Wiltron K is a registered trademark of Anritsu Corporation. All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, including withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are trademarks of JDS Uniphase Corporation. Other trademarks are the property of their respective holders. ©2006 JDS Uniphase Corporation. All rights reserved. 10116268 Rev. 003 04/06 10GZEROCHIRPVOAMOD.DS.CC.AE NORTH AMERICA : 800 498-JDSU (5378) WORLDWIDE : +800 5378-JDSU WEBSITE : www.jdsu.com